bing tracking image
  1. Accessories and Parts
  2. Lippert
  3. RV Awnings
  4. Conversion Kits
  5. 12V Power to 12V Programmable
  6. White
Solera Smart Arm Electric RV Awning Conversion Kit - Programmable - 12V - 63" Arms - White
Lippert

Solera Smart Arm Electric RV Awning Conversion Kit - Programmable - 12V - 63" Arms - White

Part Number: LC759404
$758.11
Retail:$934.95
You Save: $176.84
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Upgrade to a powered RV awning with these programmable smart arms. The accessible, built-in touchpad lets you operate your existing awning with the push of a button. Add wind and infrared sensors (sold separately) for safe and secure camping. 1-800-940-8924 to order Lippert accessories and parts part number LC759404 or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Solera Smart Arm Electric RV Awning Conversion Kit - Programmable - 12V - 63" Arms - White. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (31)
  • Q & A (0)
  • Photos

Lippert Accessories and Parts - LC759404

  • RV Awnings
  • Conversion Kits
  • 12V Power to 12V Programmable
  • Lippert
  • White
  • 63 Inch Long

Upgrade to a powered RV awning with these programmable smart arms. The accessible, built-in touchpad lets you operate your existing awning with the push of a button. Add wind and infrared sensors (sold separately) for safe and secure camping.


Features:

  • Programmable conversion kit upgrades your existing manual awning to an electric setup
    • Extends and retracts awning smoothly and quickly with the push of a button
    • Works with your existing roller and fabric
  • Waterproof touchpad on awning arm allows for easy operation from outside your RV
    • Traditional control switch that mounts inside your RV is also included
    • Manual override lets you operate your awning with a power drill (not included) if power is lost
  • One-touch safety lock button keeps your awning settings where you want them
    • Touchpad must be unlocked before any settings can be changed
  • Add-on features provide intelligent, automatic operation and programmable options
    • Wind sensor (LC715123 - sold separately) automatically retracts awning during high winds to prevent damage
    • Awning light control adjusts your LED awning light strip (sold separately) with 3 levels of brightness
    • Infrared security sensor (LC715124 - sold separately) offers added security by turning on awning lights when motion or heat is detected
  • Automatic rain dump drops one side of your awning down to keep rainwater from pooling
    • Prevents arm strain and wear and tear on your awning's fabric
  • Easy manual pitch adjustment allows you to block out the sun throughout the day
    • Does not require readjustment before retracting
  • Simple bolt-on installation with included hardware - wires into RV's power supply
    • 63" Of unobstructed space from the awning rail straight down is required
    • 2-1/2" Minimum clearance needed between awning rail and top of entry door
    • Butyl tape (sold separately) is recommended to seal brackets
  • White color
  • Made in the USA


Specs:

  • Application: 8' extension awnings from most leading awning brands, including select Dometic and Carefree
    • Dometic models: 8500, 9000, 9100, Sunchaser, and Weather Pro
    • Carefree models: Spirit, Fiesta, Simplicity Traveler, and Eclipse
  • Overall dimensions:
    • Wall-mounted bracket: 63" tall
    • Outer arm: 58-1/4" long
    • Inner arm: 49" long
    • Pitch arm: 34-1/16" long
  • Voltage: 12 volts
  • Quantity: 2 support arms
  • 1-Year warranty on electric components


how to measure an awning arm

You picked out a beautiful campsite for the weekend, a nice place to pause and relax. But before you can enjoy it, you have a whole checklist for getting your RV set up at your campsite. Getting your manual retractable awning extended is one of those tedious chores. Wrestling with your heavy canopy as you crank it all the way out, turn by turn, is exhausting and takes forever. It's time to find a better way to do this.


Programmable Power Arms

Solera Smart Arm Conversion Kit Touchpad

The Solera Smart Arm 12V power RV awning conversion kit is the first ever programmable option for your trailer or RV. You can easily extend or retract your existing awning with the push of a button. The weatherproof touchpad mounts directly on the base of the right awning arm for easy access. In other words, you no longer have to climb back into your RV to operate your awning. And if you ever find yourself without power, there's a manual override built into the drive head that you can use to retract or extend your awning with a power drill (not included).


Note: The manual override function is not available on 2017 Forest River Cherokee campers.


Best of all, this conversion kit is a great economical option. You don't need to buy new fabric or a new roller to upgrade to a power awning. You just need these new awning arms and endcaps, and you're good to go.


Intelligent Smart Arm Functionality

Weatherproof Touchpad

Solera Smart Arm Conversion Kit Touchpad

On top of extending and retracting your awning, the programmable touchpad enables you to activate and program your awning's settings using the 1-touch safety lock button. Once programmed and locked in place, your settings stay the way you want them. The touchpad also lets you activate and program optional add-on features (sold separately).


Add-On Features

Solera Smart Arm Wind Sensor

The Wind Sensor upgrade (LC715123 - sold separately) offers protection for your awning in poor weather conditions. If strong wind is detected, the awning will automatically retract, giving you piece of mind if you're away from your campsite when bad weather hits. The touchpad enables you to toggle between 3 different levels of wind sensitivity, or you can deactivate the wind sensor altogether. Just mount the sensor below the drive head on the awning arm and plug the wiring harness directly into the Smart Arm touchpad.


If you have an LED light strip on your awning, or you'd like to get one, you can control it right from the awning arm. It gives you 3 levels of brightness to choose from. If you're enjoying your patio as the sun's going down, there's nothing more convenient than being able to turn on the lights right there.

Solera Smart Arm Infrared Security System

To take your awning lights to the next level, another cool feature to add is an infrared security sensor (LC715124 - sold separately). When it detects motion or heat, it automatically turns the awning lights on. The sensor is a great security feature, as well as a convenient backup if you're returning to your RV after dark and need some light to get inside. The sensor range is approximately 8' with a 180-degree radius from its mounting location. The security sensor can be armed with the press of a button on the touchpad. Installation is simple. Just snap the unit into place on the bottom of the drive-side awning arm, just beneath the touchpad.


Automatic Rain Dump

One thing that can quickly ruin your camping trip is a broken awning. It's not easy or cheap to replace, and you can't really enjoy your patio without one. A big hazard to a healthy awning is rain: water pools in the fabric, stretching it out and putting strain on the arms with extra weight it wasn't designed to hold. Next thing you know, the fabric rips - the arms snap - the whole awning comes crashing down, slamming against your RV and leaving you with a big and costly problem.


For traditional awnings, it's up to you to run out in the rain and lower one of the arms yourself. If you're away from your RV when it starts to rain, you can only hope your awning isn't damaged when you get back. Solera awning arms are smarter than that. This conversion kit comes equipped with an automatic rain dump function. As soon as rainwater starts to pool in the fabric, one of the arms will automatically drop, giving your awning a pitched angle. The rainwater will then run off to one side, taking the pressure off your awning and your mind.


Manual Pitch Adjustment

Solera Smart Arm Conversion Kit Manual Pitch Adjustment

It's hard to get your awning in just the right place to keep you in the shade all day, especially with those awnings that are pretty high off the ground. Sometimes you need just a little slant to your awning to keep the sun out of your eyes. The manual pitch adjustment built into these arms gives you that option. Simply pull on one of the arms at the friction joint to drop that corner. It comes down easily and holds itself there for as long as you need it. When it's time to retract your awning, there's no need to readjust it; the awning will slide back into place.



759404 Solera 12V Powered RV Awning Conversion Kit - Smart Arm Programmable Awning - 63" Arms - White

Installation Details LC759404 Installation instructionsAlternate Instructions LC759404 Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.4

31 reviews
Upgrade to a powered RV awning with these programmable smart arms. The accessible, built-in touchpad lets you operate your existing awning with the push of a button. Add wind and infrared sensors (sold separately) for safe and secure camping.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Looks good, will install soon.



by:



by:



by:



by:



by:



by:

Product worked out great. Wiring diagram was a little vague



by:



by:

See my post on the wind sensor for detailed review.



by:

Had to wait a bit to get them but it was right in the middle of the Covid hysteria. Got them in and installed in one day. The wiring was a little different but I didn’t have a problem figuring it out with the help of the excellent instructions.



by:

One of the best investments we've made in our older 5th-wheel (other than automatic levelers)!



by:

Thank you great



by:

Where do I start? This kit does not include the end caps you need for a manual conversion, like from a Dometic arm. Eventhough the description and instructions say they come with the arms, the manufacturer (Lippert) packages them from a faulty picture (see above). Took three try to Lippert before I found someone in Parts to admit they made a mistake. No one had them in stock so I paid $80 for a pair on eBay. Arms work great! But I promise you, this will be the last Lippert purchase. etrailer just kept sending me to Lippert. Wow, thanks everyone! Can I do this again? Reputation defender will no doubt prevent this from being posted.



by:

The follow up with an order to replace the one that was received by UPS/Franklin MA, was received undamaged. Thank you.



by:

Great product thank you



by:

Super fast shipping and although it was a reduced price for scratches and such it is in excellent shape and had al necessary hardware for installation Extremely satisfied.


25
31
Show More Reviews

See what our Experts say about this Lippert Accessories and Parts

  • How to Wire Solera Smart Arm 12V Power RV Awning
    To get power to the controller of your Solera Smart Arm 12V Power RV Awning part # LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part # SWC9538, and part # C58450-1. The red "POWER" wire on the motor or awning head, attaches to the red power wire on the controller. The black wire is ground. The "EXT IN" and "RET IN" wires will route to inside where you have the switch mounted. The controller...
    view full answer...
    Image 1 for
  • How to Wire a Lippert Solera Smart Arm to a Rocker Switch
    Art, to wire your Solera Smart Arm Electric RV Awning Arm # LC759404 to a rocker switch, you'd just need to wire that red wire to a 15A fuse, and then to the positive post on your battery. The Smart Arm Control also has a red wire that runs to a 15A fuse and then to the battery.
    view full answer...
  • Parts Needed to Convert Dometic Manual Open Awning to Powered Awning
    The # LC434724 is actually the part you're looking for in this case. The actual dimensions of the awning fabric (16ft x 91 inches) won't really matter on this since you're just replacing the arms and will then remove the torsion springs on the roller, so the # LC434724 will be the part you're looking for. This kit will allow you to replace the manual arm on your existing Dometic awning with a powered drive head.
    view full answer...
  • Solera Power Awning Replacement for Dometic A&E Awning with 63 inches of Clearance
    Since you have 63 inches of clearance for a set of awning tracks the Solera Smart Arm 12V Power RV Awning Conversion Kit 63 inch part # LC759404 would be what you would need. This will fit with the clearance you have and will also stick out as far as your current awning as well.
    view full answer...
  • Can Solera Smart Arm Touchpad be Added to Solera Power Awning to Convert to Smart Arm
    That's an excellent question, so I reached out to the manufacturer, who told me you would not be able to convert your standard Solera power awning to the Smart Arm by adding the Replacement Controller and Touchpad # LC717666. They said you will need the conversion kit with new awning arms because the Smart Arm has different wiring than the standard power awning, allow for its functions. So you can convert to the Smart Arm awning and add the wind sensor with the conversion kit, and you...
    view full answer...
  • How to Determine Length of Arms For Solera Awning Conversion
    The length of the arms you need for the Solera awning conversion kit simply depends on the amount of space you have for the brackets, which is what the "arms" are referring to. So what you'll need to do is measure from your awning rail straight down to find the length of the arms you need. For example, if you measure from your awning rail straight down and get at least 63 inches you can use the Solera Smart Arm 12V Power RV Awning Conversion Kit - Black # LC759516 or White # LC759404. I...
    view full answer...
  • How Do I Wire The Replacement Switch Kit For Solera Power Awnings LC285500
    The Replacement Solera Awning Switch # LC285500 has 4 wires: white, red, black and blue. I have attached the diagram below which will show you the function of each wire. As far as the white and blue wires on your camper, wire color is not always universal, so it is hard to say exactly what will wire to what. It may be white to white and blue to blue, but we recommend going in with a circuit tester # PTW2992 to determine the function of each wire. With a tester it will be fairly easy to...
    view full answer...
    Image 1 for
  • Recommended Replacement Awning Arms for a Lippert Solera 3000 Series Awning
    I did check that SKU on the tag you sent and it corresponds with a pretty pricey replacement for just one and while we do not carry the exact replacement we do have another solution that you might be interested in. What you could also do if you didn't want to use the expensive replacement you could use the universal Solera Smart Arm Electric RV Awning Conversion Kit # LC759404 which comes with 2 replacement arms, is compatible with your 3000 series Solera Awning, and is also the same color...
    view full answer...
    Image 1 for Image 2 for
  • Wiring Diagram for Solera Smart Arm 12V Power RV Awning Conversion Kit
    I attached a picture of the wiring diagram for the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 that you referenced.
    view full answer...
    Image 1 for
  • Can Rain and Wind Sensors be Added to Solera RV Awning
    Actually the 12 volt Solera awnings are the ones that have the ability to add the wind sensor part # LC715123 and the rain dump sensor # LC715124. You can convert to the 18 volt system if you wanted to with the # LC759404 that you referenced but those sensors are not available for it.
    view full answer...
  • Is There Difference Between 63 and 69 inch Solera Smart Arm RV Awning Conversions
    It really comes down to the available vertical area on the RV where you plan to install the awning if the 63 inch # LC759404 or the 69 inch # LC759405 is a better fit. They both extend out 8 feet so the shorter arms would have a more flat projection if anything.
    view full answer...
  • Parts Needed for Converting Electric Awning of 2018 Thor RV to Smart Awning
    We do have kits that are designed to convert a standard RV awning to a smart awning but they include new arms and heads since that's the easiest and best way to make the change. We have 69 inch and 63 inch options available in black and white. In the 69 inch arm length we have the black # LC759517 or white # LC759405. For 63 inch we have the part # LC759516 for black or # LC759404. You wouldn't have to buy new awning fabric though as you can reuse what you have now with any of the mentioned...
    view full answer...
  • Wiring Diagram for Solera Smart Arm Awning Kit
    I attached a wiring diagram of the Solera Smart Arm awning kit part # LC759404. Hopefully it's enough to answer your questions about how it's all wired up.
    view full answer...
    Image 1 for
  • How Does Wind Trigger Solera Smart Arm Wind Sensor Kit
    I reached out to Lippert, the manufacturer, about what will trigger the Solera Smart Arm Wind Sensor Kit # LC715123. They told me that it is not actually a certain miles per hour of wind that will trigger the awning closing with this kit. The way it works is that the kit actually senses vibration in the Smart Arms this attaches to, and that is what the kit senses to know when to close the awning. It has three levels of sensitivity (or can be turned off) that detect different levels of...
    view full answer...
  • Kit to Convert Dometic RV Awning to Power Awning
    For your Dometic awning you can convert it to a powered awning with the part # LC759404 which works with Dometic setups like you have. The # LC329250 that you referenced only works with Solera manual awnings.
    view full answer...
  • Troubleshooting Solera Power RV Awning Conversion Kit With No Power From Battery
    The Lippert OneControl system is a system on Lippert chassis' that allows for the control of all electronic systems on your coach, like a Lippert Ground Control system, awnings, HVAC, generators/power, etc.. This is an add-on feature on some RVs and travel trailers, but is not standard equipment. Can bus is a type of wiring system. When it comes to the time-out you're referring to, pressing any button on the controls of the Solera Smart Arm 12V Power RV Awning Conversion Kit - Programmable...
    view full answer...
  • Are There 63" Long Arm Solera 18v Smart Arm Conversions Available
    I may have a solution for you to convert a manual awning to a powered awning, but I checked with Lippert on this and there is not a 63" version of the Solera 18v Power RV Awning Conversion Kit like the # LC434730. However, if you're looking to convert from a manual awning to a powered awning you could use the Solera Smart Arm 12V Power RV Awning Conversion Kit - Programmable - 63" Arms - Black # LC759516 or Solera Smart Arm 12V Power RV Awning Conversion Kit - Programmable - 63" Arms -...
    view full answer...
  • How to Convert Dometic Sunchaser Awning to Power Awning
    We can absolutely get you set up to convert your Dometic Sunchaser awning to a power awning, and what you will need to do is first measure how much space you have from your awning rail straight down. This should be at least 63 inches, and if you have up to 69 inches you can use the longer arm assembly: - 63" Arms - Black: Solera 12V Power RV Awning Conversion Kit # LC759516 - 63" Arms - White: Solera 12V Power RV Awning Conversion Kit # LC759404 - 69" Arms - Black: Solera 12V Power RV...
    view full answer...
  • Is The Solera Manual Pull Style Power Awning Conversion Kit Compatible With The Dometic A&E Awning?
    The Solera Manual Pull Style to Power Awning Conversion Kit, White # LC329250 that you mention is only compatible with Solera awnings, unfortunately. However, instead, the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 is much better suited and is compatible with your Dometic A&E awning.
    view full answer...
  • Wiring the Rocker Switch on the Solera Smart Arm
    According to the wiring diagram, the optional manual awning rocker switch on your Soldra # LC759404 Smart Arm has a red wire that runs to a 15A fuse and then to the positive post on your battery. The Smart Arm Control also has a red wire that runs to a 15A fulse and then to the battery. An inline fuse would work in this case. Use the Spectro # SWC9538 inline fuse holder along with a Curt # 58450-1 fuse rated for 15A. You could potentially run wires to your power panel if you have...
    view full answer...
  • Solera 15' Awning Availability As a Kit For Installing Entire Awning
    Yes, we have some 15' awnings but they are not currently available as a single kit. The Solera 15' Black Fade RV Awning Roller and Fabric (Std) # LCV000211480 can be paired with either the Solera 12V Power RV Awning Conversion Kit # LC434723 or Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759517. This will give you black awing arms and a black material that is visible when the awning is rolled up. For a white awning the Solera 15' White Fade RV Awning Roller and Fabric (Std)...
    view full answer...
  • Do You Need a Dedicated Power Wire for the Solera Smart Arm 12v
    The Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 does need a dedicated power wire. That being said, since you already have a powered system, when installing the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 you could use your current power wire as long as it is a 15 amp circuit. If it is not a 15 amp circuit then you would need to run a 15 amp circuit wire to the Solera panel.
    view full answer...
  • Converting Dometic SunChaser Awning From Manual to Power
    The correct Solera Smart Arm 12V Power RV Awning Conversion Kit for a Dometic SunChaser Awning is part # LC759404 for 63" arms or part # LC759405 69" arms. In order to determine which is correct, you need to choose the one that most closely matches your existing arm length.
    view full answer...
  • Arms to Replace Dometic Power Awning 8952xxx Arms
    We do have arms you can use as replacements for your Dometic 8952xxx Power Awning, though just the adjustable arm portion alone is not available. What we do have are the Solera Smart Arm assemblies in either 63 inch or 69 inch lengths. So that means you will need to have either 63 or 69 inches of space straight down from your awning rail for installation. The Smart Arm assemblies are also available in either Black or White in color: - 63 Inches: Solera Smart Arm 12V Power RV Awning Conversion...
    view full answer...


< Previous
12




Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda K
Updated by:
Amanda K
Employee Mike S
Written by:
Mike S
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<