1. Accessories and Parts
  2. Lippert
  3. Trailer Leaf Spring Suspension
  4. Alignment and Lift Kits
Lippert Components Tandem Axle Lift Kit

Lippert Components Tandem Axle Lift Kit

Item # LC407131
lowest price pledge
Our Price: $811.05
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 30 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Call 800-298-1624 to order Lippert accessories and parts part number LC407131 or order online at etrailer.com. Free expert support on all Lippert products. Guaranteed Lowest Price and Fastest Shipping for Lippert Components Tandem Axle Lift Kit. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (10)
  • Q & A (159)
  • Videos (1)
  • Photos
  • Why etrailer?

Lippert Accessories and Parts - LC407131

  • Trailer Leaf Spring Suspension
  • Alignment and Lift Kits
  • Lippert


  • Adds approximately 2" of additional ground clearance to a tandem axle trailer
  • Allows for further unique trailer customization possibilities
  • For use with tandem axles
  • Application: axles rated up to 8,000 lbs

Note: Does not work on trailers that have boot hangers or where the minimum distance from the I-beam to the mounting hole is less than 2-5/8".

407131 Lippert Components Tandem Axle Lift Kit

Installation Details LC407131 Installation instructions



Video of Lippert Components Tandem Axle Lift Kit

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Lippert Components - Trailer Leaf Spring Suspension - LC407131

Today, we're going to take a look at the Lippert Components tandem spring axle 2 inch lift kit. This kit will add approximately two inches of additional ground clearance to a tandem axle trailer with leaf springs, so it allows for further unique trailer customization possibilities. And again, it is for use with tandem axles.We're going to go through all the parts here that are included, laid out on the table. You get 12 of these lift kit hanger plates, 12 of the 9/16 by 18 4-inch long bolts, 24 of the 9/16 washers, and 12 of the 9/16 by 18 nuts. Right here, you get six of the hanger spacers, six of the 9/16 shoulder bolts, with 7/16 threaded in, and then six of the 7/16 by 20 flange nuts.That should do it for the review on the Lippert Components tandem spring axle 2 inch lift kit.


Customer Reviews

Lippert Components Tandem Axle Lift Kit - LC407131

Average Customer Rating:  4.8 out of 5 stars   (10 Customer Reviews)


- LC407131
by:

Perfect fit. I pull a pontoon behind camper with a 21 Chevy 3500 Z71. This kit brought camper up to almost level. Better handling and braking. Boat trailer surge pressure now in line with frame instead of pressing down. I have maxed out the hitch adjustments so this kit gave me just enough height to level out the whole rig.



- LC407131
by:

I put these on my 2016 Highland Ridge Light LF295FBH. Installation was fairly straight forward. I completed one side at a time and the first side took me twice as long as the 2nd. In all, I completed the install in about 3--4 hours. I recommend having a good set of 6 ton jack stands, a good floor jack and new quality 9/16 drill bit On a last note, I also recommend ordering a new set of bushings when ordering the kit since you will be going through the trouble of dropping the axles anyways. Mine had generic plastic bushings that had worn out, so I replaced with a set of Never Fail Bushings (LC279685) after not finding locally.



- LC407131
by:

So far the 5th wheel trailer pulls much better with the lift kit. I also installed new leaf springs and EZ Flex Equalizers. The trailer now sits level when hooked up to my F350. The lift seems to be overall about 3". The one thing I think customers should be aware of is with these older lighter duty early 2000's fifth wheels is how they originally manufactured the suspension. In the case of my Keystone Cougar; the main frame runners are narrow I beams about 6" tall by 2" wide. Welded to the main runners on the frame are "U" Channel brackets that one could euphemistically call suspension shackles. This is where the leaf springs mounted to originally. With tandem axle trailers, tight turns tend to make the axles walk or flex the tires quite a bit. Now I have extended that "U" bracket and the flex on tight turns is greatly exacerbated. I will have to watch for metal fatigue on this part or weld some stiffener brackets in place. I wouldn't trade the ease of lift though. I have struggled with how to lift my rig since I got it 5 years ago. $500 is sure cheaper than $25 - $65k for another newer factory lifted 5er.



- LC407131
by:

Installed the 2" lift kit for my trailer. Works like it should and let's me pull a level trailer now. Thanks!


Comments
Lift kit does the job!
Mark W - 05/17/2021


- LC407131
by:

I ordered this 2" lift kit and never fail bushing and got them in 3 days which is great since I paid extra for 4 day service. I will be installing in a couple of days. I anticipate no problems as install is straight forward. Lippert nor etrailer give any installation instructions, but I found the link to instructions and printed them off.



- LC407131
by:

Haven’t installed yet but etrailer was very fast shipping. Ordered on Wednesday and it was delivered on Friday! Excellent service.



- LC407131
by:



- LC407131
by:



- LC407131
by:



- LC407131
by:


20
20

Ask the Experts about this Lippert Accessories and Parts

  • 9/16 x 3-3/4 Inch Wet Shoulder Bolt Compatible with Lippert Correct Track System
    I reached out to my contact at Lippert who confirmed there isn't a way to make the Lippert Components Tandem Axle Lift Kit # LC407131 compatible with your factory installed Lippert Correct Track System, and while cutting off the flanges on the factory hangers would allow you to install the lift kit, we cannot recommend performing any such modifications to your 5th wheel trailer's original suspension equipment. We do have a 9/16" x 3-3/4" wet shoulder bolt you can use, with part # LC126197....
    view full answer...
    Image 1 for Image 2 for
  • Installation of Lippert Components Tandem Axle Lift Kit LC407131
    Lippert Components Tandem Axle Lift Kit # LC407131 provides approximately 2-inches of additional ground clearance for a tandem axle leaf spring suspension trailer. This is not a block kit but an adjustable extension kit. The kit requires no welding, but just some drilling into your existing hangers for installation. I have linked the complete instructions and the included photo shows how the kit's main components, the hanger plates and hanger spacers, install along with your existing...
    view full answer...
    Image 1 for
  • How To Raise a Trailer Without Flipping Axle
    In order to raise a leaf sprung axle without changing the orientation of the axle tube in relation to the leaf spring pack, you really only have one option which is the Lippert Components Tandem Axle Lift Kit part # LC407131 and this provides 2" of lift unlike the axle over/under kits which provide upwards of 3-4" of lift. Please note, for a single axle trailer application I do recommend using shackle straps like part # TRSL275 on the rear leaf spring hanger in order to allow for proper...
    view full answer...
  • How to Level Trailer that Sits Nose High After Adjusting Hitch Height for Bed Rail Clearance
    Ideally your 5th wheel trailer sits as level as possible and also there's at least 6 inches of clearance between the overhang of the trailer and the bed rails of the truck. In a situation like yours where having the needed bed rail clearance causes the trailer to sit nose high you would have to lift the trailer suspension, or if the truck happens to have a lift kit you'd need to remove it and go back to stock ride height. For a tandem axle trailer like yours we do have a 2 inch lift...
    view full answer...
    Image 1 for
  • Can Lippert Lift Kit Install with MORryde X-Factor Crossmember Setup
    The Lippert tandem axle lift kit part # LC407131 will work great on your trailer and give you a lift of 2 inches but since it installs by attaching to both sides of the suspension hangers will not work with the MORryde brace # MR49ZR.
    view full answer...
  • Lifting a Fifth Wheel to Fit a New and Taller Truck
    I have been in contact with Lippert, and I was able to get the individual brackets # LC84PJ added to our site. These will be direct replacements for the Lippert # LC407131. As you are only needing these for the center hangers, you will need four of these to get you up and running.
    view full answer...
  • Lift Kit Options for a 2005 Keystone Zeppelin Tandem Axle Trailer
    We do have a variety of lift kits that can possibly work with the tandem axles on your 2005 Keystone Zeppelin. If you're needing just a little lift then the Lippert Components Tandem Axle Lift Kit # LC407131 will give you up to 2" of lift. For something a little more substantial you can install an over-under conversion kit (as long as your axles are currently ABOVE your leaf springs). Use kit # K71-384-00 for a 2-3/8" axle or kit # K71-385-00 for a 3" axle. The conversion kits will...
    view full answer...
  • Lift Kit for 2018 Arctic Wolf 265DBH8
    Yes the Lippert Components Tandem Axle Lift Kit part # LC407131 is designed to fit standard axle hangers just like those equipped on your 2018 Forest River Artic wolf Fifth wheel. This kit is designed to add about 2" to your setup helping you to get closer to level.
    view full answer...
  • Best Way to Lift my Trailer
    Since your axles are already under you springs the Lippert Components Tandem Axle Lift Kit part # LC407131 is the best option to get two inches of additional leveling. This would be my first choice before going to the spring blocks. If you needed more level I would then move to the spring blocks. This way you will not be using too much or as much of a block keeping all of the components closer to their original positions and working properly.
    view full answer...
  • Lift Kit for Trailer with Tandem 4,400 lb Axles
    We have a 2 inch lift kit with part # LC407131 that would work great on your trailer to give it an additional 2 inches of lift. You might be able to raise the pin box in the frame it attaches to on your trailer to lower the nose as well. As long as you can maintain at least 6 inches of clearance there while the trailer is level you'd be good. We don't like to recommend too much of a lift on the trailer as that raises the center of gravity considerably which could cause handling issues.
    view full answer...
    Image 1 for
  • Best Way to Lift 2011 Keystone Montana 3100RL
    The best option to lift your 2011 Keystone Montana 3100RL is not technically a lift kit, but what is called an over/under conversion kit, which is sometimes referred to as "flipping the axles." This kit going to give you the most clearance, raising your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack (please keep in mind this conversion kit is for use with double-eye springs only). Your 2011 Montana 3100 RL should have tandem 3"...
    view full answer...
  • Lift Kit For Tandem Axle Trailer Where Axles are Below Springs
    We offer lift blocks for torsion style trailer suspension which you don't have and we don't have feedback on them that bounce was noticeable. I could see maybe how raising the trailer center of gravity would cause the suspension to behave differently but I wouldn't say it would always create bounce. We do have the Lippert tandem axle lift kit part # LC407131 which would give you an additional 2 inches of height which would put your in the acceptable range of 4 to 6 inches between the bed...
    view full answer...
    Image 1 for
  • Suspension Lift Kit For 2019 Eclipse Attitude 28SAG/Lippert 7k Tandem Axles
    Yes, the Lippert Components Tandem Axle Lift Kit # LC407131 that you referenced would be exactly what you would need for your 2019 Eclipse Attitude 28SAG. It will give your trailer a 2 inch lift which would eliminate the nose high situation you are in.
    view full answer...
    Image 1 for
  • Lift Kit for 2011 Keystone Laredo 310RE to Give 2 inches of Lift
    Your best lift kit solution is the Lippert Components Tandem Axle Lift Kit # LC407131 which was designed for tandem axle trailers like yours to provide an additional 2 inches of lift. It will work great with your Dexter axles and current Trailair equalizers too.
    view full answer...
    Image 1 for
  • How Difficult Is the Installation of the Lippert Components Tandem Axle Lift Kit
    The most difficult parts of installing the Lippert Components Tandem Axle Lift Kit # LC407131 is jacking the trailer up to release pressure from the leaf springs and then making sure everything is level. Aside from that you are essentially removing the wet bolts and replacing them with the new bracket and bolts. The installation instructions have been linked to this page for you to reference. Another option that is actually more cost effective is to install an over-under conversion...
    view full answer...
  • Best Way to Add at Least 2 Inches of Lift to Forest River 5th Wheel
    We do have a really good option for you to add a couple of inches of lift to your 2017 Forest River Sabre fifth wheel. Since you have already used an over/under kit the best option is the Lippert Components Tandem Axle Lift Kit # LC407131. This lift kit gives you plates which you drill into your existing hangers and will give you two inches of additional height. The accompanying photo is one that a customer sent in after installing the kit, and I have added a link to a video review...
    view full answer...
    Image 1 for
  • Lift Kit for Montana RV Built on Lippert Chassis
    The Lippert Components Tandem Axle Lift Kit # LC407131 does have the weight capacity needed for your Montana trailer and will give you 2 inches of lift like you are looking for. I attached a link to this page that has the install instructions for you to check out as well!
    view full answer...
    Image 1 for
  • Correct Lift Kit for 2019 Grand Design 17MKE
    The correct lift kit for your 2019 Grand Design 17MKE is the Lippert Components Tandem Axle Lift Kit # LC407131. This lift kit will give you 2 inches of lift and has uses hanger plates that drills into your hanger which is what will give your trailer its lift. I have added a link to a video review of this kit as well as a link to the installation instructions which I recommend taking a look at. The other option for you is not technically a lift kit, but what is called an over/under...
    view full answer...
    Image 1 for
  • Lippert Tandem Lift Kit and Correct Track Comparisons
    The Lippert lift kit part # LC407131 is very similar to the Correct Track you mentioned. Basically they both share the same lift kit components but the Correct Track (no longer available) also had some alignment components that are no longer available at this time. Both kits give the same 2 inch lift.
    view full answer...
  • Solution for 2019 Grand Design Reflection 28BH Sitting 6 Lower Than 2017 Super Duty
    Thank you for the information and photos! Normally we recommend using an over-under kit to move your axles from above your leaf springs to under them, but since your axles are already in this position you can either use the 2" Lift Kit # LC407131 or you'll have to replace your current hangers with tall ones to get your rig sitting any higher. You ultimately should be okay being out of level by 3" - 4" but anything more than that would cause issues. I would just go with the Lippert...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Can the Lippert Components Tandem Axle Lift Kit Be Used With MOR/ryde CRE3000 Equalizers
    Yes, the Lippert Components Tandem Axle Lift Kit part # LC407131 can be used with the MOR/ryde CRE3000 equalizers.
    view full answer...
    Image 1 for
  • Is There a Maximum Recommended Height to Raise Trailer and Recommended Lift Kit for 5th Wheel
    These are good questions so let's take them one at a time, starting with if there is a recommended maximum height to lift a trailer, and the answer is no, but obviously the higher the trailer sits, the more unstable it can be, which is why there aren't these massive lift kits like you see for passenger trucks, for example. We don't carry trailer axle lift blocks, so we aren't familiar enough with them to make a comparison, so to lift your trailer I do recommend the Lippert Components...
    view full answer...
    Image 1 for Image 2 for
  • How To Raise a 5th Wheel Trailer To Sit Level With a Ford F-350
    Yes, the Lippert Components Tandem Axle Lift Kit part # LC407131 is the solution to your problem which is to raise the trailer in order to sit level with the tow vehicle. This problem is actually very common nowadays as trucks continue to sit higher and higher which is why aftermarket lift kits such as the above are available. The Lippert Components Tandem Axle Lift Kit is easy to install so you should not have to pay someone to do this for you or at least not very much and you don't...
    view full answer...
  • How To Stop Tires From Hitting Bottom Of Fenders and Wearing
    Generally speaking, there will need to be between 3-4" of clearance between the top of the tire and the bottom of the fender. In regards to how to fix this, I would rate new leaf springs first but only if they are worn which is causing the trailer to sag as aside from this you would not get much lift if at all. The best and easiest option would be to install the Lippert Components Tandem Axle Lift Kit part # LC407131. The tires will also need replaced but you would most likely not be...
    view full answer...
  • Can Lippert Components Tandem Axle Lift Kit be Installed on Keystone Cougar 244EFS 5th Wheel
    The Lippert Components Tandem Axle Lift Kit # LC407131 is a universal kit so it is compatible with any tandem axle trailer that uses the standard leaf spring setup. This is a pretty easy way to raise your Keystone Cougar 244EFS the 2" that you are needing, but I would like to just throw out there to make sure you have adjusted the height of the 5th whee hitch and your pin box as well. Sometimes you can do a little adjustment there and avoid having to install something like this (not that...
    view full answer...
  • Lippert 2 inch Lift Kit for Tandem Axle Trailers
    The correct track alignment/2 inch lift was replaced by the Lippert 2 inch lift kit for tandem axles # LC407131. This is basically the same thing except it doesn't have ability to make alignment changes.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.