1. Accessories and Parts
  2. Lippert Components
  3. Trailer Jack
  4. Camper Jacks
  5. Legs
  6. Driver Leg
Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin

Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin

Item # LC179013
lowest price pledge
Retail:$216.09
Our Price: $179.82
You Save: $36.27
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 25 lbs
Quantity: 
In Stock
LC179013 - Legs Lippert Components Trailer Jack,Camper Jacks
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Call 800-298-8924 to order Lippert Components accessories and parts part number LC179013 or order online at etrailer.com. Free expert support on all Lippert Components products. Guaranteed Lowest Price and Fastest Shipping for Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (58)
  • Q & A (58)
  • Photos
  • Why etrailer?

Lippert Components Accessories and Parts - LC179013

  • Trailer Jack
  • Camper Jacks
  • Legs
  • Lippert Components
  • Driver Leg


  • Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement lead landing gear drop leg and snap pin will get you back to camping and enjoying the great features of your power landing gear. This kit includes the landing gear lead leg and snap pin and is easy to install with minimal assembly required.
  • Kit includes landing gear lead leg and snap pin
  • For use on LCI Power Landing Gear assemblies
  • Easy to install
  • Minimal assembly required
  • Black powder coat finish is corrosion resistant
  • Grease zerk fitting makes maintenance easy
  • Made in the USA
  • Weight capacity:
    • Manual crank: 4,000 lbs per leg
    • Single motor: 2,500 lbs per leg
    • Dual motor: 4,000 lbs per leg
  • Overall height: 32"
  • Outer tube width: 2-1/2"
  • Inner tube width: 2-1/4"
  • Outer tube height: 29-1/2"
  • Travel distance: 21"
  • Drop leg travel: 16"
    • Can be adjusted in increments of 1", leaving the bottom hole for installation of footplate
  • 1-Year limited warranty


179013 Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin






Customer Reviews

Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin - LC179013

Average Customer Rating:  4.8 out of 5 stars   (58 Customer Reviews)


- LC179013
by:

I am the original owner of a 2010 Montana Mountaineer 5th wheel. I replaced both the lead and follow landing gear. I studied the different landing gear available, and chose to try the cheaper items. These less expensive ones LC179014 and LC179013 were exactly the same as the old ones. Installation went smoothly, and they fit perfectly. 409192



- LC179013
by:

On my 5 whl the landing gears froze up and would not turn either way. I ordered LC179013 and installed myself. That was s good job for an old 70Yrs fat man to do.. I got them installed and wired up and they work like a champ. That has been over a year ago and have been used alot. 744739



- LC179013
by:

I called my order in so I could ask the questions to make sure it was the correct piece. Nick was very astute and understood how to help me! I first found this part without grease fittings, but she'd if I could put them in. Then, Nick found me this that already has them! Ordering was easy. Free shipping got it here in a few days, on time. Install was easy. Popped in just like the old one popped out. The only issue: my old one had a bracket welded onto it that would push up against a flat bracket on the trailer post. This new one did not. I'm not sure if it is necessary since this new one didn't come with it? But I cut the old one off and welded it onto this one. Took an extra half hour. Fortunately, that was easy for me... But if you don't have a welder? Just make sure to ask if it is truly necessary?! Other than that, very pleased with their service and the product with as soon as it was installed. I'll update if it breaks early... 720442



- LC179013
by:

This was a great purchase to replace the existing front end camper jacks. Replacement was very simple and operation is very smooth. 706937



- LC179013
by:

Product shipped fast. As per some reviews I had to modify the tabs to get it to fit. I ground off about 1/16" with a cut off wheel on my die grinder. This leg works great and comes with 2 zerk fittings which my OEM did not have. The zerks are better than nothing but I used a piece of PVC packed with grease to lube the jack screw. 705821



- LC179013
by:

This part... worked. 699351



- LC179013
by:

Landing gear has been installed for over a year and continues to function. Still quiet too. 683219



- LC179013
by:

Very knowledgeable and speedy delivery! First time customer and very much pleased!! 671426



- LC179013
by:

Product was great quality and showed up very quick. Price was also very reasonable! 647333



- LC179013
by:

Great experience from start to finish! Bryan provided competent professional customer service. The items arrived sooner than I expected and were a perfect fit for my RV. Installation was easy and quality of the parts is superb. I am a huge fan of etrailer.com! 633438


Comments
The parts have been on the RV for a year now and still work perfectly!
Michael - 04/20/2020

73687

- LC179013
by:

Fast delivery. Good service. Part fit as good as new. Thanks Tiffany 618089



- LC179013
by:

Very good company to show in the internet thanks etrailer.com 617867



- LC179013
by:

They were excellent to work with. 608051



- LC179013
by:

The lead leg went on our 2006 Keystone Montana Mountaineer and was an exact fit. Order just the gears but before came realized needed to replace whole leg. Called and spoke with customer service and sales, they sent me a return slip and my item was returned per their policy with no problem. They were very helpful and knowledgeable, to help me get what I needed for sure. Product arrived quickly, easy installation, and now ready to enjoy summer. Ordered from etrailer before, they are a wonderful, knowledgeable company to keep our equipment operational. They get a A+ for customer service. 594594



- LC179013
by:

howdy natalie was very very helpful..i had questions, she had the right answers..the part I needed was the right one and the installation went surprisingly easy...thanks natalie and by the way she laughed at this old Wyoming rancher's jokes. need the right parts for campers..use etrailer.... thanks again carroll g 571164



- LC179013
by:

good product and good price 568490



- LC179013
by:

Landing gear that I bought got here on time and fit like the original. Easy to install and worked great. 555148



- LC179013
by:

These fit perfect on my 2008 Montana. They have weld notches on both sides. Mine needed them on the outer sides. The grease zerks are a nice upgrade too. 548624



- LC179013
by:

2009 31' crossroads Cruiser 5th w. Purchased lc179013/14. Fast order and delivery. Has additional grease fittings from originals. Heavy duty. Very happy with product and company. 541051



- LC179013
by:

Exactly as described at a great price. The unique grease fittings should allow for years of reliabile service. 539438



- LC179013
by:

Came in timely fashion, part worked well 528630



- LC179013
by:

The parts were exactly what I ordered and better than the OEM parts. It took only an hour to replace the OEM landing gears. 517094



- LC179013
by:

With the Help of Michael H, and the excellent video I was able to sort through and get the correct part on the first try. Thanks Rick H. 512596



- LC179013
by:

Customer service was great. It was a fairly easy repair. Has been in service for over a year now on our 40 ft 5th wheel. Still working as required. 494860



- LC179013
by:

Nicole was extremely helpful and knowledgeable with my order of a Lippert 5th wheel leg. The leg was exactly what I needed for 2008 Everest fifth wheel. Very fast shipping and very happy customer. Thanks!! 474264


30
63
Show More Reviews

Ask the Experts about this Lippert Components Accessories and Parts

  • Replacement Landing Gear Leg for Atwood Lead Leg
    Atwood has been bought out by Lippert and for your replacement I recommend the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin # LC179013 and get the matching follow leg # LC179014. This will give you a matching set so they will operate at the exact same speed and strength. These legs are 29-1/2 inches long outer tube (32 inches total). These legs have the 2-1/2 inches outer tube width.
    view full answer...
  • Will Lippert Landing Gear # LC179013 and # LC179014 Fit a 2008 Wildcat 5th Wheel Trailer
    The Lippert Components Lead Leg # LC179013 and Follow Leg # LC179014 both have the standard weld stop measurements that are 15-1/2" from inside to inside and 17-1/2" from the outside to outside (see attached picture). Since this is a standard weld stop measurement these will likely be exact replacements for you, but you will simply want to look at the weld stops on your current landing gear to see if it is the same. You will also want to verify the weight capacity of your current landing...
    view full answer...
  • Do Lippert Landing Gear Legs # LC179013 and # LC179014 Have Grease Fttings
    There is a great chance either of the legs you mentioned would work as a replacement, but I'd need to know for sure what landing gear you have on your trailer. The Lippert landing gear like the part # LC179013 and # LC179014 are very popular and there's a strong chance this is what you need.
    view full answer...
  • How To Find the Correct Landing Gear Legs for a 2012 Keystone Avalanche
    In order to find the correct replacement landing gear legs for a fifth wheel trailer I would need you to take two quick measurements of your existing landing gear legs, the outer tube length and weld stop spacing. I have attached a photo to assist. The most common replacement landing gear legs are the Replacement 5th Wheel RV Landing Gear Legs part # LC179013 for lead and part # LC179014 for follow. These measure 29-1/2" on the outer tube and 15-1/2" between the weld stops (inside to...
    view full answer...
  • Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
    I can give you some information to help you determine if the Lead # LC179013 and Follow # LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers. Both legs have an overall height of 32" with an outer tube width of 2-1/2" and an inner tube width of 2-1/4". The total travel distance is 21" with a 16" drop leg travel. To determine if these will fit directly to the brackets that you currently...
    view full answer...
  • Replacement Landing Gear Lead Leg for 2004 Keystone Sprinter
    We may have a replacement lead leg that will work with the landing gear system on your Keystone Sprinter, but I was unable to cross reference the part number you provided to a specific leg that we carry. Most likely the landing gear on your trailer uses the Lippert Lead Leg # LC179013 that you referenced, but there are a couple measurements you can take on your existing leg to make sure it will be compatible. This leg features an outer tube height of 29-1/2 inches and an overall height...
    view full answer...
  • Landing Gear for a 2009 Heartland Bighorn 5th Wheel Trailer
    I did some checking and the 2009 Heartland Bighorn 5th wheel trailers were built on a Lippert chassis and have other Lippert components so the landing gear will also be Lippert. If you just need to replace legs then the lead leg is # LC179013 and the follower leg is # LC179014. If you need the whole set use # LC333964.
    view full answer...
  • Replacement Lead Leg For Atwood Landing Gear On 2003 Jayco 5th Wheel Trailer
    It sounds like you need the replacement leg for the left side of your landing gear on your 2003 Jayco 5th wheel trailer. Atwood has been bought out and the parts are being switched to Lippert. If you need the drive leg(the one with the crank or motor on it), use part # LC179013. This is normally on the left when facing the trailer . For the follower leg (no motor or crank), use part # LC179014. You can replace both if you desire using the Lippert RV Landing Gear - Manual Crank # LC333966...
    view full answer...
  • Recommended Lubrication Maintenance for Lippert Landing Gear Legs
    Glad to hear how pleased you are with the Lippert landing legs # LC179013 and # LC179014! I spoke to my contact at Lippert and he recommended a white lithium grease like # L10308 for the zerk fitting for the gears and a silicone based lubricant on the exterior of the legs. He also told me that there is no particular schedule for greasing, just an as needed basis. He did tell me that you will want to be careful not to over grease them or the grease will run down the leg and attract...
    view full answer...
  • Replacement Lead Landing Gear Leg Recommendation for 2013 Montana High Country Model 343RL
    The correct replacement lead leg you'll need is the part # LG-179013. This matches the dimensions you listed and is designed to fit as replacement for the Lippert landing gear jacks like yours as well.
    view full answer...
  • Can a Bent Landing Gear Jack Leg be Straightened
    No, it is not recommended to try to straighten a bent jack tube. That would put more stress on the steel and there could also be internal damage that is unseen from the outside. I recommend replacing the damaged leg to avoid all potential issues related to a bent leg. I have included a link to the replacement legs that we carry.
    view full answer...
  • Replacement Lead and Follow Legs for Atwood 5th Wheel Landing Gear
    Yes, you can purchase just one leg for a 5th wheel landing gear set. The two leg types, the lead or driver leg and the follow leg, differ so you'll want to select the specific one you need. The two linked pages display the various brands and sizes of lead and follower legs for many popular brands like Atwood. Many of these items are quite similar and can often be interchangeable between brands so long as the weight rating and dimensions match but you can simply click on the Atwood logo...
    view full answer...
  • Replacement Lead Leg for Lippert Landing Gear on 2008 Keystone Everest 5th Wheel
    Our Lippert replacement landing gear lead/driver legs are shown on the linked page. RV makers don't maintain specs on the specific jacks they install so just compare the dimensions of these items to yours. Most likely Lippert part # LC179013 will work fine. This lead leg outer tube has a height of 29-1/2-inches; the outer tube measures 2-1/2-inches and the inner tube 2-1/4-inches.
    view full answer...
  • Replacement 5th Wheel Lead Landing Gear Leg for 2011 Keystone Cougar
    You are correct that Lippert part # LC179013, their 5th Wheel RV Landing Gear Lead Leg, is the correct part to replace the damaged unit on your 2011 Keystone Cougar.
    view full answer...
  • Correct Replacement Landing Gear Legs for 2004 Keystone Montana 5th Wheel Big Sky
    The correct replacement landing gear leg for a Keystone Montana 5th Wheel is actually the Replacement Leg for Keystone Montana 5th Wheel Landing Gear part # LC178652 for the follow leg and part # LC178653 for the lead leg. However, there are others that will work which have the same dimensions. That said, the issue you are having is that you purchased a lead leg which is for the driver side and need a follow leg, the part # LC178652.
    view full answer...
  • How do Lippert Landing Gear Legs Attach to a Trailer Frame
    The Lippert Components 29-1/2" Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 that you referenced would bolt to a trailer if it currently has Lippert landing gear on it. This would attach to the trailer's current frame brackets. If your trailer has a different brand of jacks installed currently you would need to have the frame brackets moved if they are not 17-1/2 inches apart measured form the insides.
    view full answer...
  • Replacement Landing Gear Legs for a 1998 Terry 5th Wheel Trailer
    Although we do offer replacement bevel gears for landing gear legs, none of them match the dimensions that you provided for your bevel gears unfortunately. I can only imagine you are going to have a really tough time finding just the bevel gears for such an old trailer if they are even available so I really think your best option would be to just replace the legs. In order to offer options for you I would need you to take two quick measurements of your existing landing gear legs, the outer...
    view full answer...
  • Availability of Follow Leg to Match the Lippert Components Lead Landing Gear Leg # LC179013
    The Lippert Components 29-1/2" Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 is a lead leg. If you are looking for the opposite configured version of this leg you would need the follow leg part # LG-179014.
    view full answer...
  • Replacement Landing Gear Follow Leg for 2007 Alpenlite
    The difference between parts # LC179013 and # LC179014 is that part # LC179013 is the Lead Leg, which means it is always connected to the manual crank or electric motor, while part # LC179014 is the Follow Leg, which means it will only be connected to the second motor in a dual motor setup. Typically the Lead Leg is on the driver's side of the vehicle so you will most likely want the Follow Leg. You can verify this by looking at your landing gear and checking out which side has the motor.
    view full answer...
  • Can Trailer Landing Gear Legs without Zerk Fittings be Greased
    I attached a picture that shows where the zerk fitting for greasing the Lippert landing gear part # LC179013 is, but if your landing gear does not have any fittings best bet would be to take off the top (if possible) and apply grease to the bevel gears here and/or spray lithium grease up through the bottom of the inner leg as much as possible.
    view full answer...
  • How to Determine if Lead Landing Gear Leg Will Fit 5th Wheel Trailer
    I can tell you how to find out if the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 will fit your 2011 Dutchmen but trailer manufacturers don't keep specific parts lists that we would be able to cross-reference in any way. What you will need to do is measure your current landing gear leg and if they match the Lippert # LC179013 it will work! I added a photo for you to reference which shows each of the dimensions of this leg; it has an outer tube which is...
    view full answer...
  • Will Lippert Replacement Lead Landing Gear Leg Fit a 2010 Heartland Sundance 3200es
    Replacement landing gear jack leg # LC179013 will most likely fit your 2010 Heartland Sundance trailer. Many of the jack manufacturers make landing gear jacks that are interchangeable with each other so you would need to look at the bracket stop measurements on your existing jacks. The standard measurement used by most jacks is 17-1/2 inches from the top of the upper bracket stop to the bottom of the lower bracket stop as shown in the picture I have included. The other thing to consider...
    view full answer...
  • Recommended RV Replacement Landing Gear For 2005 Starcraft Homestead
    Most fifth wheel landing gear is standard size these days. I recommend the Lippert lead leg # LC179013 and follower leg # LC179014 to replace the legs on your Fulton system. This can be used with the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015, and replacement motor # LG-196308. If you want a new system instead of piecing together a new system, I recommend the Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs # BD500162 for a lead and...
    view full answer...
  • Is Replacement Gear Set Available for Lippert Landing Gear on Montana 5th Wheel RV
    I reached out to my contact at Lippert who said that there unfortunately are no repair kits available for your landing gear legs so you will need to replace them. If you'd like exact replacements we have those exact legs here are parts # LC179013 and # LC179014. If you wanted a more cost-effective alternative then we have the Landing Gear Set # RVLG-8HDL which operates manually but can be upgraded to electric with the motor # LC142178 and switch # LG-145236. For an upgraded landing...
    view full answer...
  • Replacement Lead and Follow Legs for 5th Wheel Landing Gear on Jayco Trailer
    Trailer makers like Jayco typically don't maintain details on the specific landing gear brands they install but we do offer replacement parts and service kits for most brands out there. But since your jack tube is bent you'll need to replace it since there is no way to straighten it out. You will need to determine if it is the lead/driver leg or the follow leg you need and also check for any brand or part number labels on the jack. You also want to note the length and diameter. I linked...
    view full answer...
  • Determining the Right Lippert Landing Gear for my 2007 Holiday Rambler Presidental
    There is an easy way to tell in this situation. The Lippert Components 32" Lead 5th Wheel RV Landing Gear part # LC179013 has a weld stop measurement outside to outside of 17.5". You can simply measure yours and if it is the same these will work out great. These will offer a 4000 lb. per leg lift capacity with your dual motor setup and be plenty to take care of the weight of your camper. If for some reason those stops are further apart let me know.
    view full answer...
  • Distance from Weld Stop to Center of Shaft on Lippert Landing Gear Leg # LC179013
    The distance from the top of the upper weld of the Lippert leg part # LC179013 to the center of the shaft measures 6.4 inches.
    view full answer...
  • Replacement Driver Leg for Atwood Landing Gear Jack on Camper
    I wish we had access to that part number but since Atwood was bought and mostly dissolved as a brand the replacement part you are looking for is no longer available. Best option is a new drive leg as other brands will fit as a replacement like the # LC179013 which is 32 inches long, part # LG-179013 which is 29-1/2 inches, or # LG-177202 which is 33-1/2 inches.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Chelsea B
Updated by:
Shelly K
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.