Trim Kit for Kwikee SuperSlide II Tray Assembly - 32" Long

Video Transcript for Review of Lippert Components - RV Cargo - LC370682

Today we're going to take a look at the 32" long Trim Kit for the Kwikee SuperSlide Two Tray Assembly. Now, this trim kit here will provide the end pieces, the mid-rails needed to complete your SuperSlide Two tray assembly for RV cargo compartments. Now, the SuperSlide Two tray assembly we do sell that part separately on our website. This kit here will include everything laid out here. It's got the two end trim pieces, the three mid-rail trim pieces right here in the middle, and then over here, the longer bars, we have the two slide square jig cross strips, and over here the four slide square jib knee braces. Comes also with a bag of 40 rivets for installing everything and a nice set of detailed installation instructions.Now, the end trim pieces, which are these two larger pieces right here, these are designed to help keep the cargo from sliding off of your tray.

The three mid-rail trim pieces here, these will help provide extra support, and then the square jig cross strips and knee braces, they're used to help keep your slide-out square when it is being assembled.These parts are made in the USA. Few specs on this. I measured all these just to give you an idea, so on the end trim pieces, they're going to be right at 32" long. The height on it is going to be right at 4-1/2 tall, and that's on these two pieces. These three pieces here, the mid-rail pieces, they're going to be right at 31-3/4 long, and the width on them is going to be right at 3 wide.The knee braces, which are the smaller ones, these are going to measure length-wise right at 18-3/4, and the width on them is right at 5/8.

On the cross strips, which are the two longer ones, these are going to measure length-wise, oops, there we go, right at 29-3/8, and they're going to be the same 5/8 wide. That should do it for the review on the 32" long Trim Kit for the Kwikee SuperSlide Two Tray Assembly.