This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 2 standard male flare nut fittings.
Features:
Specs:
Flexible Rubber Brake Hose
This Kodiak brake hose is made of rubber, making it a practical choice for a variety of applications. Because you can easily bend it, a rubber hose is simpler to work with than a rigid stainless steel brake line. This flexibility makes a rubber hose great for use with foldaway trailer tongues because it is less likely to kink or break when bent. In addition, rubber hoses allow for a wide range of motion so articulating parts can effectively function. These qualities make rubber hoses better suited than steel lines for trailers with torsion axle suspension systems and trailers that have disc brakes.
Stainless steel brake lines have braided exteriors, which can not only wear against exterior surfaces, but also against the interior lining of the hose if dirt gets underneath the steel braid. And if the braid on a stainless steel line tears, it can cut into the hose lining. The exterior surface of this hose is solid rubber, so there are no crevices for debris to enter.
Durable Fittings with Deep Threads
Kodiak brake hoses have corrosion-resistant brass fittings with stainless steel flares. These fittings have a gap built into them that allows room for a line wrench - also called a flare nut wrench - to slide over the line and down to the nut. This type of wrench grips the nut better than a standard open-ended wrench so there is less chance of stripping the threads as you tighten down the nut.
The stainless steel that is used to create the flares on this hose is stronger than brass. As a result, these fittings are more durable than ones made entirely of brass. The stainless flares are primarily designed to keep the fittings from splitting when you tighten them down, but they offer absolute rust protection as well.
Kodiak's fittings have deeper threads than many other fittings on the market to provide a higher thread engagement. Deeper threads offer an advantage when used with fittings that have the same thread depth. These Kodiak fittings will work with most fittings on the market, but when they're used with other Kodiak fittings, the result is a stronger connection with fewer leaks.
Average Customer Rating: 5.0 out of 5 stars (17 Customer Reviews)
This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 2 standard male flare nut fittings.Came fast and was best price! 605494
Very happy with the knowledgeable support team. They quickly determined the correct parts to order for my trailer brakes. Received the parts faster than expected. No additional parts were needed. A big thanks to them. 664731
Was the only place I could find a long enough cable. Great Price and came fast! Definitely recommend purchasing from them!!!!! 607692
Product as expected from etrailer. Worked great for installation on a Titan 19' trailer when I converted it to a swing tongue last summer. durable product w/ brass fittings. 730327
Bought 18 ft. brake line to use on an orchard hydraulic pruner. Needed the flexibility of the hose to eliminate tube bending. I couldn't find a place to submit my order online, but when I called, the customer service was excellent. The order was received and shipped out immediately along with updated tracking info all along the way. I have ordered from etrailer before and have always been satisfied, so I will continue to order parts from them as needed. 722726
The shipment was extremely quick and the product (brake line) was very high quality. Unfortunately, the length was about 2ft too short, so I'll be looking on etrailer this morning to see if I can find something a little longer. I appreciate the follow-up email. Great company, and great service! 578408
Rachael H - 11/29/2018Lori was a big help in my purchase of this hose. I replaced one hose and the metal brake line that ran from the actuator to the rear "T" fitting on my Ellis boat trailer. 520496
Perfect fit , quality part . Thank you 478381
Same size and fittings as my 2003 karavan. I couldn't be happier with my purchase. thank you etrailer!!! 404143
good products 396045
Hose worked great! Used it to replace a steel line after installing a folding boat trailer tongue. 369154
GREAT PEOPLE TO DEAL WITH AND PRODUCTS WERE DELIVERED ON TIME 296421
This was the only place I found what I needed. Fast shipping. 274792
Needed to replace brake hose on boat trailer. This one was offered at a great price and was the same as what was originally on trailer. It's been installed on trailer for a couple of weeks now and works perfectly 273793
it fit like a glove ...thanks for the fast shipping 216891
Exactly the line I needed to replace what I had on my dual axle disc brake trailer. Very fast shipping and great customer service. I will buy all my trailer parts from here from now on. 205887
As adverstised, good product, price, and fast delivery. A third of the price of an OEM replacement. Thank you! 145819
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.