Slip-on rotor fits over 7,200-lb to 8,000-lb idler axles and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, well-functioning rotor. Dacromet plating provides superior rust resistance.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Kodiak 13 inch dacrament finish rotor. It has the eight on six and a half inch bolt pattern for 7200 pound to 8000 pound axles. This is a slip on over the hub rotor. It makes it very easy to convert an idler axle to disc brake axle. It is designed to fit over a standard idler hub and it's held in place by the wheel and the wheel bolts.This is a cast iron construction, which will ensure a favorable friction coefficient for necessary stopping power. This rotor has an acredact plating to it to provide superior corrosion resistance for fresh water or salt water use.It does have a 300 to 400 hour salt spray rating.
If you notice this rotor is a vented design, which will effectively dissipate the heat. It helps prevent any heat related damage.The nice thing about a slip on rotor is there's no need to replace your entire hub and rotor assembly, if only the hub or the rotor becomes damaged.Now the distance from hub face to hub face does increase by approximately half an inch. This part is made in the USA. The specs on it, the axle capacity it fits is 7200 - 8000 pound axles. The wheel size that will work on this is 16 and larger.
The bold pattern is an eight on 6 and a half inch bolt pattern.The overall diameter edge to edge is 13 inches. The inside diameter, inside to inside is nine inches and the bolt holt diameter on this rotor is 5/8 of an inch.That should do it for the review on the Kodiak 13 inch inaudible 00:01:26 finish rotor. Eight on six and a half inch bolt patter for 7200 - 8000 pound axles.
Average Customer Rating: 4.9 out of 5 stars (79 Customer Reviews)
Slip-on rotor fits over 7,200-lb to 8,000-lb idler axles and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, well-functioning rotor. Dacromet plating provides superior rust resistance.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.