Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Slip-on rotor fits over 7,000-lb idler axles and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, well-functioning rotor. Dacromet provides superior rust resistance.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Kodiak 13" Dacromet finish rotor with the 8 on 6-1/2" bolt pattern for 7,000 lb axles. Now this is a slip on over the hub rotor. Makes it very easy to convert your idler axle to a disc brake axle. It's designed to fit over a standard idler hub and it's held in place by the wheel and wheel bolts. It is a cast iron construction, which ensures a favorable friction coefficient for necessary stopping power. This rotor here has a Dacromet plating to it, which provided superior corrosion resistance for fresh water or salt water use.
It has a $300 to $400 salt spray rating. If you notice on the rotor it's a vented design, which will effectively dissipate the heat, prevents any heat related damages. And what's nice about the slip on rotors, there's no need to replace your entire hub and rotor assembly if only the hub or the rotor becomes damaged.Now the distance from hub face to hub face will increase by approximately 1/2". This part is made in the U.S.A. A few specs on it again, this is designed for axle capacity of 7,000 lbs.
The wheel size that will work on this is 16" and larger. The bolt pattern is an 8 on 6-1/2" bolt pattern. Outer diameter on this rotor from edge to edge is 13". The inner diameter portion, which is measured inside to inside here is 9" and the bold hold diameter is 1/2". But that should do it on the review on the Kodiak 13" Dacromet finish rotor with the 8 on 6-1/2" bolt pattern for 7,000 lb axles..
Average Customer Rating: 4.9 out of 5 stars (79 Customer Reviews)
Slip-on rotor fits over 7,000-lb idler axles and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, well-functioning rotor. Dacromet provides superior rust resistance.Lost a hub in route out west and needed professional advice, great service and quality parts.
Got all if it here at Etrailer.
Parts arrived fast as described and fit perfectly. Made our breakdown less stressful knowing Etrailer was helping us get everything we needed.
Thanks much
Still going strong after a year and several saltwater baths.
good product
fast and cheap in stock and got delivery before 5 days early
looked good fit perfectly
Boat trailer caliper was seized and causing the brakes to overheat. Headed over to etrailer.com since they seem to have the best part selection and easiest website to navigate.
I purchased a caliper that came with pads pre-installed (https://www.etrailer.com/Accessories-and-Parts/Kodiak/KDBC225DAC.html) and a rotor (https://www.etrailer.com/Accessories-and-Parts/Kodiak/KR12D.html).
Installation went smoothly. I'll be back for the other side when it's time.
Easy product search process. Easy order process. Fast delivery.
These rotors replaced an identical set from the OEM on a WESCO dual axle trailer. Unfortunately, my brake pads disintegrated and scored the rotors after two years of salt water use, but these rotors seem like great quality and were very easy to replace. I used anti-seize for this job. Highly recommended, especially if you dip them in salt water at all.
you had all the parts to completely rebuild my trailer brakes to new condition. As it is a salt water trailer, they are holding up very well. Thanks for being here and your good service
Exactly what I needed and great quality! Ordered the rotor on Sunday and it arrived Tuesday. Great service.
great products, great service, fast delivery.
I was not sure where to look for these types of parts, but e-trailer has been a super provider of items for the truck, so i looked at them for these parts. they had a good selection, the website helped give confidence in ordering the right part and prices are very fair.
Just finished, almost finished, installing the new pads, rotors and brake lines. All materials look to be high winds, very happy with them.
The customer service people I worked with were awesome, very knowledgeable and helpful. Love dealing with etrailer.
Same as oem that came on my trailer, arrived quickly and was price matched.A win all around.
Great customer service and speedy shipping time.
Solid performance.
Rotor, bolts, brake pads, and lug nuts all arrived as promised and fit as advertised. Reasonable price with good service means I'll be back.
Fit perfectly. I love etrailer. Fast shipping, accurate orders.
Perfect fit and installation
On time, reasonable quality. Like any thing used i marine environment they have alimited lifespan. Dacromet helps but is far from answer.
Excellent turnaround I purchased a rotor for my boat trailer , it was just what I needed and was represented precisely
Parts were as ordered and arrived on time. I will be getting all trailer parts in the future with you.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
1/12/2024
Parts are flawless and working as inspected being a quality part that etrailer carries. Etrialer is the best. Thanks again.