Replacement part fits Kodiak calipers for disc brake assemblies on axles rated from 3,500 lbs to 6,000 lbs. Stainless steel core resists corrosion and is great for marine applications.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the replacement silicon dust boot with the stainless steel core for Kodiak disc brake calibers on 3,500 pound to 6,000 pound axles. Now, this part will replace the dust boot on the Kodiak disc brake calibers. It is designed to fit models with axle capacity of 3,500 pounds up to 6,000 pounds. This does use a stainless steel core, which is very durable and rustproof, so it's ideal for marine use. This boot will help keep any dirt or debris or moisture from getting into your piston on your brake caliber. This is designed to fit the Kodiak calibers that are marked Kodiak 225.
A few measurements on this. The overall diameter from edge to edge is right at 2.77 inches and the inner diameter is right at 1.7 inches.That should do it for the review on the replacement silicon dust boot with the stainless steel core for Kodiak disc brake calibers on 3,500 pound to 6,000 pound axles.
Average Customer Rating: 4.8 out of 5 stars (36 Customer Reviews)
Replacement part fits Kodiak calipers for disc brake assemblies on axles rated from 3,500 lbs to 6,000 lbs. Stainless steel core resists corrosion and is great for marine applications.The dust boot was used as a replacement part for Tie Down / Dexter caliper pn 46304, (on a LoadRite boat trailer). Tie Down / Dexter does not sell their dust boot separately; must buy their kit with piston $$$).
I used the seals for the Demco KarKaddy SS brake (caliper #13825-92) outer piston 2.238" diameter. Demco does not supply parts for their calipers just complete assemblies & expensive. The original seals came apart at very low mileage & time, the Kodiak seals are of much better quality.
Looks like the parts & brake pads from the Kodiak Disc Brake Caliper 3,500-6,000lbs will work for me when I need additional parts in the future,
etrailer is great to work with.
I would go with regular ole rubber if I were to do it again. These silicone boots were a royal pain in the to get installed. The silicone is very slippery and soft.
Will also work on Demco Kar Kaddy SS ca lipers.
Perfect fit, great replacement for my rebuilt break calipers
I researched some great information from your web site. From that information I was able to determine the various manufactures of the surge brake parts on my old boat trailer and order rebuild kits and replacement parts. Thru your web site (and other online research) I was able to rebuild my old boat trailer suspension and braking system to new condition.
Good quality great fit
These fit the demco Kar kaddy with disk brakes. Worked good as replacements after the breakaway cable tangled and caused the brakes to drag and overheat.
Part was OEM. Fit asexpected
I purchased a Titan accuator, brake pads, wheel bearings, and break seals for my trailer. All came as ordered and promised. I was extremely pleased with the lowest prices and short time it took to fill my order!!
Have not installed these yet but fit and finish appear good, no damage. Exactly what I ordered I received!
-I didn't use the dust covers or seals. I bought them in case teh calipers needed it. It turned out the actuator was bad. I got one locally. I should have got it here!
I had an excellent experience in purchasing a product from this company. The products I bought came in good quality, and the customer service was great. I would definitely recommend this company to anyone in search of quality parts and excellent customer service.
Perfect replacement dust boot needed to rebuild my caliper. Fit perfectly
It is a work of art. Smooth gray silicone perfect fit goes in and out smoothly. And extends fully without popping off.. A wonderful satisfying product!
Great replacement seal
Ben B - 04/04/2020have not checked with my brake caliper but when I do I,ll let you know.Looking at it seems the one
Great product great company to do business with.
Right seals in stock
Exactly what i needed. Quality good.
Fast shipping Parts fift great
Well made. Thanks.
Thanks
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.