Video Transcript for Replacement Surface Mount Floor Receptacle for Jif Marine Boat Tables: The Breakdown

Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a quick look at the replacement surface mount floor receptacle. This is for your Jif or J-I-F Marine boat tables. So this is going to be that place where the leg of the table actually mounts in and holds it secure. So if something happened to your original, maybe got busted or bent or something happened along the way, this is going to be a direct replacement for that. So it should have all the same features.

It is made out of a high impact plastic, so it should take quite a bit to crack this guy.As far as measurements, I'll give you some numbers to think about here. The inner diameter of that opening is two inches. Flip that up so you can see that there. So two-inch inner diameter overall outer diameter is about six and a half inches from one edge to the other. The height is about two inches and the distance between our mounting holes center to center is about five and a half inches.

The diameter on those mounting holes is about an eighth inch maybe I'd say about an eighth of an inch. Does not come with any hardware to get this installed, so you will either have to reuse the hardware from your original or pick up some new screws for it. You will need six screws to get that completely mounted to the floor.That's pretty much all there is to it. It does work with several different boat tables. The complete list of part numbers is going to be on our website here at etrailer.com.

So it should fit 315-DSH-KF or 315-DSI-KF. That's going to do it for our look at the replacement surface mount floor receptacle. I hope this video has been helpful in determining presuming the right thing for you. If not, we do have a lot of other options available here at etrailer.com for replacement parts for your boat and other things. Thanks for watching and I'll see you next time..