Single Rocker Switch - On/Off - SPST - White Plate with Red Illuminated Switch

Video Transcript for The Low-Down on the Single Rocker Switch

Jeff: Hello everybody. This is Jeff at etrailer.com.Today we're going to take a look at the single pole single throw red illuminated on/off rocker switch.Now, this is a single on and off switch for controlling lights or other applications. As mentioned it as a single pole single throw. So it's 10 amps at 14 volts DC, 16 amps at 125 volts AC, or 12 amps at 250 volts AC.You can see it as a nice white plate with the red switch and the red will illuminate when it is in the on position. This part is made in the USA.And just to give you a few dimensions on this, the switch overall width is going to be right at 11 sixteenths of an inch. Overall height, one and one quarter inch tall, and it goes into a cutout.

You can see there's two clips that you push together, slide into the cutout and it'll pop open, or pop out and lock it into place. So the cutout dimension width is going to be right at half an inch, and the cutout height is going to be right about one and one eighths inches tall.But that should do it for the review on this single pole single throw red illuminated on and off rocker switch.