Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125 - 250V AC, 3/4 hp at 125 - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 11/16" tall x 1/2" wide.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone I'm Ellen here at se-trailer.com and we're going to be taking a quick look at the single rocker switch. This allows you to replace a switch that's maybe gone bad or seen better days, and it needs to be replaced. So it's pretty simple. It's just going to be an on-off switch as single pole, single throw. So it's just going to power one item either on or off. I'm going to take a little closer look at it.
It's just going to be this little switch here. So it will fit flush with your mounting plate. If you want, you could also mount this into a plate. We have a couple of options here at se-trailer dot- excuse me, se-trailer.com. If you want to get that plate, there are a few on the product page that are related products.So as far as the size goes: for our cutout, it's about half an inch wide, the base there, and then about three quarters of an inch, maybe 11/16" for the length.
There are two little prongs on either end to hold in place. So it'll give some tension whenever this is put into the mounting hole or the cut out points to hold them in place. Overall, it's about seven eighths of an inch wide by about an inch and a quarter long. And depending on how far you have this setback might be about a half inch deep.It is made in the USA. As far as the output ratings for this, it can handle 16 amps at 125 up to 250 volts AC, can power three quarter horsepower at that same AC voltage, 125 up to 250 volts AC, or 10 amps at 14 volts DC.
That's about all there is to it for our look at this rocker switch. I hope this video has been helpful in deciding if this is going to be the right piece for you. We do have other options available though, here at se-trailer so if you want to check those out, definitely do so. Thanks for watching.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125 - 250V AC, 3/4 hp at 125 - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 11/16" tall x 1/2" wide.Arrived in very timely manner was exactly what I needed to finish my project on rv
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.