Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V - 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 1-1/4" wide.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there RV and camper owners, today we're going to be taking a look at JR Products on-off rocker switch. These are available in either black, white, or brown to match your interior. And you can see how smooth that switch is there. It's a nice large switch, so it's very easy to identify, and for a light switch I really like it, because it has such a large switch, when it's dark outside and you're trying to fumble through the hallways, you can easily identify this switch without having to see it, and you can clearly feel what position it's in, since the way the switch kind of sticks out here. And since this is a simple on-off switch, it's great for all of your 12 volt accessories. Some other examples besides just lights might be a range vent above your oven.
Exterior lights are another good example. Maybe a roof vent, pretty much anything that you just, you want it to be on certain times and off often other times, maybe it's for a pump for your water system to help you clean that out. There's a lot of different applications. It's just whenever you want to turn it on, you simply hit the switch, and when you're gonna turn it off, you hit it once again. The switch is an easy replacement since it has a nice bezel that covers up all the mounting hardware on there.
It helps you get a nice, quick, clean installation, because you don't have to be too particular about the stuff underneath. If you follow along with us, we'll show you how to get a switch replaced. We've recently serviced this motor home for our customer and they mentioned to us that their lights weren't working properly. We came in here and we turn the switch on and off, nothing's happening, we did verify that other accessories work, just not this one here. So that means it's probably an issue with the switch, the lights, or the wiring.
Well, since both lights don't work, more often than not that means it's probably not the lights, it's probably the common part that controls both. So I highly suspect that our switch must be open internally, it's not closing the contacts. So we're going to go ahead and pop it off of there, inspect our switch, and then get us a new one installed if it ends up being damaged. To remove the switch you'll simply take a flat-bladed screwdriver, and I just gotta put a little bit of side pressure on it, and then you can get this underneath there, and you can pop the cover off here. So, there we go.
And that just pops off of there. That'll reveal two screws that hold our switch in place. You can use either a number two square drive, or a phillips bit to remove these. Now your switch at home may look slightly different than this if you're replacing a factory switch, but as long as it's the same relative size, this replacement switch we're going to be putting on should work just fine. So now we can just pull our switch down, looks like our wires aren't very long, so you don't want to pull too hard. We'll just get those disconnected from there. Make sure that they don't fall back up into place. So we're just going to kind of put some, a little bit of pressure on those, tucking them sideways so that they don't fall up in there on us. And with this switch they can't be easier to replace it, because if you look here it's just got two prongs on the back. This switch is either on or off. So since this is just a switch that's either letting current pass through it or not, it doesn't matter how we wire it up to the switch. You can put either the hot or the cold on here, and it's still, on either prong, and it's still going to complete the circuit and send it onto our lights. So we can just take this old, no good switch here, and we're going to grab our new one, and we're just going to simply plug it in. So now we've got our new switch from JR Products. It's a similar shape, size, and style. We're using one that's black so it matched the old one, but these do also come in white if you would prefer that to match your particular interior. So now we'll just take these two leads that we removed from our old switch. We're just going to slide these onto the prongs. So the same size, and we can already see there when we touched it, we had our switch in the on position, the light flickered on. So we know that our new switch is working properly. I went ahead and turned it off, just so it's not blinding me while I'm trying to get these plugged in. Wanna make sure you get them all the way plugged in. We don't want to have exposed leads up in there. All right, and once you've got them inserted, we can put our switch up into place. And then we're just going to reuse the hardware that we took out of there. Now, if you're adding your own switch, you will have to provide your own hardware, and you'll have to trim out your hole. The nice thing about this though is the switch does come with a bezel here. So that way you can ensure that your hardware is not going to be seen. And when you go to cut out your hole, you can cover up any nasty marks you made while cutting. And it also makes a great template for determining the size hole you're going to need to cut out. If you could just sit this up here, maybe put it the other way like this, trace out that hole, cut that out, and that way, you know your switch is gonna push right up in there. And if you look where the screws are here, you can be sure that this hole here is not going to cut out too much, so you're still gonna have plenty of meat for your screws to go into. The cover's just got a couple of little tabs you can see here in opposite corners, those line up with the prongs there, and it just snaps right into place. So now we can test it out, and our switch is now working properly again. We've got lights over here, so you can see this is a nice, quick, easy replacement that you can easily do at home in a matter of minutes. And all you really need is a screwdriver..
Average Customer Rating: 4.9 out of 5 stars (12 Customer Reviews)
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V - 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 1-1/4" wide.I purchased to replace the smaller switches that came in our 2011 Montana. These are easier to use and have a more modern look. They were easy to change out. The cover plate is a little smaller than the ones they replaced so that did leave one of the small holes for the mounting screw visible but it's not really noticeable.
A beautiful look and update. I love these and the clean look they bring.
Works good.
Satisfied and will install it in a few minutes!
Switch was an exact replacement for the original and works well.
Good replacement part, fit right back with no problems.
Easy to install and look very professio nal.
Fast shipment and exactly what I wanted at the right price
as descibed fast ship
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.