Hopkins Plug-In Simple Brake Control Wiring Adapter - Dodge

Hopkins Plug-In Simple Brake Control Wiring Adapter - Dodge

Item # HM53035

lowest price pledge

Retail:$25.98

Our Price: $19.40

You Save: 25%
Accessories and Parts

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.32 lbs

Quantity: 
In Stock
HM53035 - Wiring Adapter Hopkins Brake Controller
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Brake Controller
  • Wiring Adapter
  • Plugs into Brake Controller
  • Hopkins
  • Vehicle Specific
Designed for your vehicle with a factory tow package, this wiring harness plugs into the quick-connect harness located under your dashboard and into your Hopkins Agility, Impulse, Reliance or BrakeForce brake controller for easy installation. Call 800-298-8924 to order Hopkins accessories and parts part number HM53035 or order online at etrailer.com. Free expert support on all Hopkins products. Guaranteed Lowest Price and Fastest Shipping for Hopkins Plug-In Simple Brake Control Wiring Adapter - Dodge. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (8)
  • Q & A (7)
  • Videos (1)
  • Photos
  • Why etrailer?

Hopkins Accessories and Parts - HM53035

Designed for your vehicle with a factory tow package, this wiring harness plugs into the quick-connect harness located under your dashboard and into your Hopkins Agility, Impulse, Reliance or BrakeForce brake controller for easy installation.


Features:

  • Connects your Hopkins brake controller to your vehicle's factory tow package
    • 1 Plug is inserted into the back of your electric brake control
    • 1 Plug is inserted into the factory-installed port under your dashboard
  • Requires no cutting or splicing wires for installation - just plug and play
  • Works with Hopkins Plug-In Simple brake controllers (Agility, Impulse, Reliance and BrakeForce)
  • 90-Day limited warranty


Tech Tip: The OEM plug in your vehicle is located under the dashboard to the left of the steering column.


This brake control wiring adapter will simplify the installation of your Hopkins electric brake controller. Once the brake controller is installed, the harness then plugs into a port under the dash. Because your vehicle has a factory tow package, all the wires for the brake controller have already been run from the 7-way trailer connector at the back of the truck to the plug under the dash. If your vehicle does not have a factory 7-way, additional wiring will be necessary to complete installation.



53035 Hopkins Plug-In Simple Brake Controller Wiring Adapter - Dodge



HM53035 Installation InstructionsInstallation Details HM53035 Installation instructions

This Product Fits The Following Vehicles

2011 - 2019 Dodge Durango with factory 7-Way

2011 - 2019 Jeep Grand Cherokee with factory 7-Way

2017 - 2019 Chrysler Pacifica with factory 7-Way



California residents: click here


Video of Hopkins Plug-In Simple Brake Control Wiring Adapter - Dodge


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hopkins Brake Controller HM53035 Review

Today we're going to review part number HM53035. This is the Hopkins Plug-In Simple Brake Control Wiring Adapter. Now this is a custom-fit part. It is designed to fit the Dodge Durango and Jeep Grand Cherokee with the factory tow package starting in 2011. Now on any type of custom-fit part I do recommend you go to our website, use our Fit Guide, put in your year and model vehicle, and that will determine if this part will work for your application. Now this will connect your Hopkins brake controller to your vehicle's factory tow package. Basically one plug right here, the black one, is inserted into the back of your electric brake controller, and the other plug right here you can see is designed to insert into the factory-installed port that's under your dashboard.

Now usually the OEM plug on these vehicles is located under the dashboard to the left of your steering column. This requires no cutting or splicing of wires for installing it. Just plug it into both ends and it's ready to go. Now again this plug-in right here is designed to work only with the Hopkins Plug-In Simple Brake Controllers which are the Agility, the Impulse, the Reliance, and the BrakeForce models. Total overall length on this fully extended out measures about 36 inches. That should do it for the review on part number HM53035, the Hopkins Plug-In Simple Brake Control Wiring Adapter.

.


Customer Reviews

Hopkins Plug-In Simple Brake Control Wiring Adapter - Dodge - HM53035

Average Customer Rating:  5.0 out of 5 stars   (8 Customer Reviews)

Designed for your vehicle with a factory tow package, this wiring harness plugs into the quick-connect harness located under your dashboard and into your Hopkins Agility, Impulse, Reliance or BrakeForce brake controller for easy installation.

- HM53035
by:

I was able to quickly find the right wiring harness for my vehicle, and the ordering process was easy. The harness was delivered on time without any issues. The vehicle-specific video was very helpful in making the installation as easy as possible. 612660



- HM53035
by:
2012 Jeep Grand Cherokee

Easy connection. Perfect fit. 557604



- HM53035
by:
2013 Dodge Durango

I have placed several orders now with etrailer, easy, parts shipped on time, no problem I recently purchased wire harness HM53035 to hook up a Hopkins brake controller in my 2013 Durango. Works great, thanks etrailer. Michael T. Michigan 451802



- HM53035
by:

Connected with help from etrailer.com video. Worked out great! Installation was easy with patience and placement of unit. Thank-you etrailer.com! 284734


Comments

Working great and thank-you for a fantastic product!

JOHN T - 11/02/2017

30439

- HM53035
by:

Awesome product. Small and unassuming yet works well. I bought this brake controller simply because i just didn't want to see a box attached to my dash. And I received exactly what I was hoping for. Yes there's still a box, but it's attached to the kick panel under the dash as opposed to being directly on the dash. Highly recommended. 224431



- HM53035
by:

Easy-Peasy.......Play and Play. Installation could not have been easier. You guys have come a long way from spending hours under the dash trying to find the correct wires. Easy to install, looks good, works as it should. 186499


Comments

Still working Just like new!

Gordon D - 04/22/2016

17575

- HM53035
by:

Extremely helpful site. Good people, good selection,and good service. Very satisfied. 154607



- HM53035
by:

Easy to install, works better than the one it replaced. 130761


8
8

Ask the Experts about this Hopkins Accessories and Parts


  • Installing an Electric Trailer Brake Controller in a 2018 Chrysler Pacifica
  • Since you already have a 7-way trailer connector and a brake controller all you should need is the adapter to connect the controller. That's assuming the 7-way is factory installed. If you've installed it yourself, or had it installed aftermarket let me know. If it's a factory 7-way there's going to be a connector under the dash above the steering column not far from where it goes through the firewall. The connector you're looking for probably has a green cover over it. Once you...
    view full answer...

  • Troubleshooting Installation of Hopkins InSight Trailer Brake Controller HM47297
  • I could not find any order history based on your email address but for the Hopkins InSight trailer brake controller # HM47297 if you see power levels indicated when you press the manual override lever there should be output on the blue wire that gets routed to your 7-way trailer connector. If your Durango has a factory 7-way, installation will use wiring adapter # HM53035 to connect to the under-dash port. If it does not have a factory 7-way then the InSIGHT would have been hardwired....
    view full answer...

  • Installing Brake Controller in 2015 Jeep Grand Cherokee w/ Knee Airbags
  • We've installed several brake controllers on the 2014 Grand Cherokee, we were able to install the controller on the lip running along the bottom edge of the dash, as you can see in the video I've linked for you. A proportional controller like the Tekonsha Prodigy P2, part # 90885 will work just fine for you. You'd need the # 3045-P wiring adapter as well. Another option would be a controller with a remote display, like the Hopkins Insight, part # HM47297. The controller itself can be...
    view full answer...

  • Husky Brake Controller Install Harness Recommendation for a 2011 Jeep Grand Cherokee
  • The Hopkins brake controller wiring harness # HM53035 will not plug right into your Husky Quest brake controller. But you could still use it even if the end that plugs into the controller is not compatible. You would simply cut off that end and hardwire the controller to the harness. From our understanding Hopkins makes the Husky brake controllers, but they change the connectors so this one won't plug right in. The wire functions for the Quest controller and the harness are white for...
    view full answer...

  • Does 2011 Jeep Grand Cherokee Hopkins Brake Controller Installation Require Separate Switch
  • If your 2011 Jeep Grand Cherokee has a factory installed 7-way trailer socket at the back bumper then you will want to order the Hopkins InSIGHT Flex-Mount Trailer Brake Controller along with its matching quick-connect adapter. The part number for the controller itself is # HM47297; the adapter is # HM53035. If your Grand Cherokee does NOT have a factory 7-way then instead of the adapter you'll need to order the controller unit # HM47297 and a brake controller install kit, part # ETBC7,...
    view full answer...

  • Will Hopkins Brake Controller Install Harness # HM53015 Fit Hopkins InSIGHT Brake Controller
  • Yes, the Hopkins brake controller install harness part # HM53015 that you referenced will work with the Hopkins InSIGHT brake controller part # HM47297 that you referenced. Looks like you might have a 2012 Dodge Durango though which means the correct install harness is actually the part # HM53035.
    view full answer...

  • Does Brake Controller Install Harness for Jeep Grand Cherokee Also Fit Dodge Vehicles
  • Dodge and Jeep are both made by the same company which is why the harnesses for a Jeep might have Dodge in the descriptions. The harnesses typically fit several vehicles by the same manufacturer so some Jeep vehicle and Dodge vehicles are listed. The install harness part # HM53035 fits the following vehicles: 2011 - 2019 Dodge Durango with factory 7-Way 2011 - 2019 Jeep Grand Cherokee with factory 7-Way 2017 - 2019 Chrysler Pacifica with factory 7-Way
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Jackie C
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.