Replace a lost or damaged hitch adapter sleeve on your Hollywood Racks hitch-mounted bike rack. Aluminum sleeve converts a 1-1/4" shank to fit 2" hitches. Fits models HR1000, HR1000R, HR2500, HR6500, and HR8500.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement hitch adapter sleeve for the Hollywood Racks bike carrier. Now, this part will replace a lost or damaged hitch adapter sleeve on your Hollywood Racks hitch-mounted bike rack. It's a nice aluminum sleeve. It converts a 1-1/4" shank to fit 2" hitches. It replaces the hitch adapter sleeve on Hollywood Racks bicycle carriers with the 1-1/4" shanks, so it does fit the model numbers HR1000, HR1000R, HR2500, HR6500, and the HR8500. All those racks we do sell separately on our website.This part is constructed of a durable rustproof aluminum with a nice black anodized finish, and it includes the mounting screw that you use to install it to the 1-1/4" shank.
Basically size on this, the length of it is right at 4", again 2" by 2", and then the inside part which fits on the smaller shanks is going to be 1-1/4" by 1-1/14".But that should do it for the review on the replacement hitch adapter sleeve for the Hollywood Racks bike carrier.
Average Customer Rating: 4.7 out of 5 stars (19 Customer Reviews)
Replace a lost or damaged hitch adapter sleeve on your Hollywood Racks hitch-mounted bike rack. Aluminum sleeve converts a 1-1/4" shank to fit 2" hitches. Fits models HR1000, HR1000R, HR2500, HR6500, and HR8500.The part was delivery very quickly. The machining work on it was excellent. The part was very well made and made to near perfect sizes for the outside and inside hitch dimensions. 711686
Just what was needed. Fits over 1 and 1/4 inch "tongue" of the bike rack to adapt it to fill up a 2 inch trailer hitch receiver, for a more solid fit. The original bike rack probably came with adapter, but this was passed along to us, without it. Problem solved. 698726
Good solid product 579028
Product works very well. replaces the plastic part that was originally installed. I wanted to purchase the new adapter, but you were out of stock. This will be fine until I can get the new adapter. 544332
Solid heavy duty product, performed as expected. Used on my old Allen 1.25" bike rack to adapt to my 2 inch trailer hitch. 524220
Product was just what I needed. It fit onto the 1 1/4 bike rack bar perfectly and design with the locking screw made the two pieces like one. It was a bit loose in the hitch, which is normal with all the different hitches, but etrailer had a attachment that takes care of that. etrailer took care of all my question and proved great customer support as well as provided information on the part I ordered as well as the part I was putting it on which included installation instructions and details. 500744
Good service and arrived right on time 483582
Works perfectly and much better quality than the lost adapter it replaces. 472149
pleased with service and products I orderd from etrailer. 399611
The product works perfect.Thanks so much. It solved my problem. 336555
The original adaptor that came with my Hollywood bike rack was a plastic/carbon fiber type block and the shoulders that the bolts sit on eventually broke off after a few years. This looks like a far more robust item and I anticipate it will work better than the original. It also came with a new hex head bolt. 327185
The trailer hitch addapture perfectly met my need. I first went to several auto part store and the store at which I bought the bike rack. No one knew what I was asking for . I went to this sight and found the item immediately. 292712
I was looking for a part (which I already had) for my Hollywood bike rack. The rack we used to carry our bikes down to Florida from Pa. and it shook and flopped back and forth all the way down and back (had to shimmy it up to help stop problem). When we got back I ordered the HRREDADA part thinking my other one was bad. I put the new one on as the adaptor of my bike rack and same thing. I even tried it on my buddy's hitch and same thing - sway and shimmy. So I don't know what the problem is - is it my trailer hitch, which maybe is defective, is it the bike rack itself which may be defective? My buddy and I couldn't figure out what the problem is. I am afraid to take the bikes attached to the hitch with so much sway. The bottom line is this new HRREDADA did not solve my problem at all since it was the same one I had already. I am really frustrated now. Maybe it is the design of this adaptor or maybe not - so I can't give it a good rating since it didn't help me at all. 266411
Part is superior to the original that came with my bike rack. Product was delivered promptly. The order was processed the same day as the order was placed. Good product, excellent service. 225165
As ordered and on time. 216123
Good quality product, this would probably work well to upgrade any 1-1/4 trailer with a plastic 2" adapter. Used this to adapt a different trailer to 2". I tapped my rack (aluminum shank) and used the included machine screw to permanently hold it on, basically like you would for the carrier this was designed for. 202757
Thank you very much for a fast and great service, easy transaction and i'm very satisfied. Thank you again. 194479
Luc - 06/17/2016Great price, quality and really fast sh ipping. 187870
Much more stable than the extended one I originally bought 146921
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.