Goal Zero Faraday Case for Yeti Solar Generator

Video Transcript for Review of Goal Zero Generator Accessories - Protective Bag - 287-92500

Hey everyone. I'm Ellen here at etrailer.com, and today we're taking a quick look at the Goal Zero Farrah Day Case for your Yeti Solar Generators. So this is going to be a nice soft case. That's going to protect your solar generator from any kind of interference from solar winds and also from any kind of electric magnetic pulses or EMPS. So as we're out on the trail or out in the wilderness off grid, we don't want anything to get in the way of our power supply. So this is going to be an easy way to protect that from any kind of interference from the outside.

So it'd be a nice, easy to use case.We'll have this sort of soft protector for our straps. So those power stations can weigh a good amount of weight there. So by having that nice handle, it's going to help protect our hand make a little bit easier to transport around without getting fatigued.As we're going around the inside lighting is going to be constructed of a high shielding fabric. That is dual pair seemed. So basically this means that it's very well-insulated to get this all sealed up.

You'll notice there's a nice hook and loop material going all the way across our bag. You want to make sure that you roll that so that it makes contact with that hook and loop material, open it up and you can see that high shielding material.That's this kind of almost metallic looking kind of golden material in here. So it'd be two layers of that high shielding fabric. It is designed to work with any Yeti Power Station with also extra rooms. So if you want to throw in some of your other electronics, tablets, phones, things like that, your GPS, that's going to keep everything nice and protected.

In addition to protecting it from any kind of electrical interference, it's also going to protect it from any water as well.It's going to be a water resistant carrying case. So if it happens to start raining while you're transporting things around, it should stay nice and dry inside there. So in addition to those EMPS, it's also going to keep us safe from solar flares blocks, any kind of Wifi, Bluetooth cell signals, GPS RFID, and radio signals with 60 to 80 decibel, average attenuation. So I kind of just did this without thinking about it, but the way you want to steal this up, you'll notice there's the hook material. And then the loop material.It's kind of hard to see maybe because of the black on black coloring, but you just want to match those up.

You do that by kind of folding over the bag, kind of push in the sides so that it creases that makes it a little easier to fold it on itself and then just push it down all the way across.And that way it gets a nice seal. They also have the instructions for that sewn into the bag. So if you happen to forget quite how that works, you can do, refer to that. There's also a little pocket on the outside. So if you want to keep some things safe and here I've got the instructions that it comes with, as well as the tag, just to get it out of the way, but you can have your name, address, things like that put on there or like I have the instructions on how to use utilize the bag properly, just weighs about two pounds. So fairly light on its own. As far as the dimensions, it's going to be 28 inches tall, 16 inches wide and 12 inches deep.Although the usable space inside there is going to be a little bit smaller, but again should fit any of your Yeti Case Power Stations, but that's pretty much going to do it for our look at the Goal Zero Faraday Case for your Yeti Solar Generator. Thanks for watching.