Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - Dual Bank - 30 Amp - 12V

Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - Dual Bank - 30 Amp - 12V

Item # 34276119

lowest price pledge

Retail:$155.00

Our Price: $123.99

You Save: $31.01
Accessories and Parts

This item qualifies for Free Shipping

Shipping Weight: 1.03 lbs

Quantity: 
34276119 - Solar Controller Go Power RV Solar Panels
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos

30-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Prevents battery damage from harmful overcharging and uses automatic multistage charging to extend battery life. Call 800-298-8924 to order Go Power accessories and parts part number 34276119 or order online at etrailer.com. Free expert support on all Go Power products. Guaranteed Lowest Price and Fastest Shipping for Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - Dual Bank - 30 Amp - 12V. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (1)
  • Q & A (6)
  • Videos (1)
  • Photos
  • Why etrailer?

Go Power Accessories and Parts - 34276119

  • RV Solar Panels
  • Solar Controller
  • Go Power

30-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Prevents battery damage from harmful overcharging and uses automatic multistage charging to extend battery life.


Features:

  • 30-Amp solar controller with PWM technology monitors and adjusts output from your solar panels to prevent harmful overcharging of your batteries
    • Compatible with 12V solar systems up to 488 watts
  • Digital PWM technology regulates panel output through pulses to provide a consistent charge
  • Automatic multistage charging switches modes as the battery charges and helps extend battery life
    • Preset charging profiles for sealed/gel, AGM, flooded, and lithium batteries
    • Bulk mode charges at the full rated load for a quicker recharge time
    • Absorption mode provides controlled voltage to ensure a full charge
    • Float mode maintains a lower voltage to compensate for self-discharge which reduces battery stress
    • Equalization mode activates to prevent stratification and sulfate buildup for flooded batteries during extended float cycles
  • Maximum Power Boost Technology allows you to top off your battery charge to run electrical loads at night
    • Activates bulk mode manually during any charging stage
  • Dual-bank battery charging terminals let you charge 2 batteries
  • Backlit, digital LCD display monitors current, voltage, and state of charge
  • USB port provides an outlet to charge small electronic devices
  • Solar controller can be used as on/off remote for Go Power pure sine wave inverters with communication cable (sold separately)
  • Built-in safety features protect your RV's electrical system
    • Current protection for battery reverse polarity, solar array reverse polarity, overheating, short circuiting, and excess current
  • Flush-mountable for a sleek, integrated look
    • Includes hardware


Specs:

  • Application: 12V battery and solar systems
    • Works with sealed/gel, AGM, and flooded lead acid, and lithium iron phosphate batteries
  • Maximum solar array current: 30 amps
  • Voltage:
    • Battery range: 6 - 15.5V
    • Maximum solar panel input voltage: 28V
  • Operating temperature range: -40 F to 140 F
  • Temperature compensation: -13mV per F
  • Maximum wire gauge: #4 AWG
  • Weight: 0.66 lbs
  • Dimensions: 7-1/2" wide x 4-1/4" tall x 1-3/8" deep
  • 5-Year warranty


go power solar controller

This solar controller prevents harmful overcharging by adjusting the power generated by a solar panel before it reaches your RV batteries. It uses pulse width modulation technology to regulate the output through pulses that provide a consistent charge. Typically, this type of technology is a good fit for smaller systems with lower voltages.


Automatic Multistage Charging System

Using a multistage charging system, the controller automatically switches voltages while the battery bank charges. This accelerates the charge, but also helps extend battery life by adjusting the voltage during the different modes. The controller is compatible with multiple battery types and includes preset charging profiles for sealed/gel, AGM, flooded/wet cell, and lithium batteries.


Charging Modes

  1. Bulk: This mode charges at the full rated load for a quicker recharge time. As the name suggests, this is where the bulk of the charging happens. It typically charges the battery to at least 80% capacity.
  2. Absorption: This mode provides controlled voltage to ensure a full charge. Once the battery reaches between 80% to 90% capacity, the absorption state will kick in and start charging at a regulated voltage. In each charging profile, this mode is set to last for 30 minutes after the bulk charge is completed.
  3. Float: Once the battery reaches full charge, this mode maintains a lower voltage to compensate for self-discharge. This reduces battery stress and minimizes gassing and water loss.
  4. Equalization: On flooded/wet cell batteries, this mode activates to prevent stratification and sulfate buildup during extended float cycles. These two issues can damage a battery by causing the accumulation of acid at the bottom of the battery and hardened sulfate crystals on the battery plates. This mode is especially helpful when your battery is going unused during storage.

Practical, Convenient Features

With Maximum Power Boost Technology, you can simply press a button to activate Bulk mode for the highest charging voltage. This lets you quickly top off your battery bank before the end of the day by capturing as much power as possible.


solar controller terminals

This solar controller is built to charge two battery banks and has terminals for a primary and secondary battery. Your primary battery will receive the full current until it is completely charged. Then, your secondary battery will start to draw the charge current.


solar controller digital display

The backlit, digital display acts as an information center for your solar panel output. It shows the charging current, battery voltage, and battery state of charge. It also allows you to input your battery type and choose a charging profile. Additionally, a built-in USB port on the front of the controller provides a convenient outlet to charge your cell phone or tablet.


Lastly, the controller includes several built-in safety features to help protect your equipment. The charging process will shut down if the controller starts to overheat and when an overcurrent is detected. Also, if the battery or solar panel is wired incorrectly, it activates a reverse polarity alarm.


Power Control for Compatible Go Power 12V Pure Sine Wave Inverters

By linking the solar controller and a Go Power 12V pure sine wave inverter with a typical telephone cable, you can control the inverter's power function. Additionally, when the battery bank falls below 11V, the controller uses an automatic low voltage disconnect that shuts down the inverter. After the bank has been sufficiently charged (12.8V for lead acid and 12.2V for lithium), the inverter will turn back on automatically.


Compatible Pure Sine Wave Inverters

  • GP-ISW700-12
  • GP-ISW1000-12
  • GP-SW1000-12
  • GP-HS1500-12
  • GP-ISW1500-12
  • GP-ISW2000-12
  • GP-SW3000-12

How It Installs

The solar controller flush-mounts to a wall inside your RV. The manual includes a mounting template with measurements to ensure proper installation. It is wired to the solar panel using MC4 cables. Then, the battery bank is wired to the primary terminals on the controller. If you are using additional batteries, they can be connected to the secondary terminals. You can also install a fuse or circuit breaker (sold separately) up to 50 amps between the solar controller and battery for additional current protection.



82756 Go Power! PWM Digital Solar Charge Controller w/ USB Port - Dual Battery Support - Flush Mount - 30 Amp

Replaces Go Power 76119

Replaces Go Power GP-PWM-30



34276119 Installation InstructionsInstallation Details 34276119 Installation instructions34276119 Installation InstructionsAlternate Instructions 34276119 Installation instructions



Video of Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - Dual Bank - 30 Amp - 12V


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Go Power RV Solar Panels 34276119 Review

Speaker 1: Today we're taking a look at the Go Power Flush Mount 30 Amp PWM, Digital Solar Controller with the USB Port. Now this digital solar controller will maintain the life of the battery by preventing over-charging. The controller will regulate the current flow from your solar panels to your batteries.Does use a temperature compensated PWM, which is pulse with modulation charging. Does use three battery charging profiles: sealed gel, AGM and flooded and it has four stage charging: bulk, absorption, float and equalize.It has a nice back-lit LCD screen, which will display your charging current, battery voltage and the battery state of charge. Does use the MPBT, which is maximum power boost technology, this will let you manually bulk charge at any stage of the charge cycle. Does use dual-bank battery charging.Right up front here, has a nice built-in USB charge port right there.

On the back it does use heavy duty terminals to provide low resistance connections. It does have battery reverse polarity protection, solar ray reverse polarity protection, also over temperature and over current protection.It's very easy to install, it's flush mountable, includes the mounting screws to install it. Comes with a nice users manual, describes how it operates.Now this is compatible with the Go Power Overlander, the Retreat, the Solar Flex, the 80 watt Eco-Solar kit and portable solar kits. It is suitable for 12 volt solar systems up to 488 watts. Nominal system voltage is 12 volts, operating consumption is 6mA amps, display consumption is 10mA amps.

Operating temperature on this is negative 40 degrees fahrenheit up to 185 degrees fahrenheit.And the last thing I want to do is just give you a measurement on this. Overall length of it end to end is right at seven and a half inches, height top to bottom is four and a quarter inches tall, and the total depth on it, it's gonna be right out one and three eighths inches deep.That should do it for the review on the Go Power Flush Mount 30 Amp PWM Digital Solar Controller, with the USB Port.


Customer Reviews

Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - Dual Bank - 30 Amp - 12V - 34276119

Average Customer Rating:  4.0 out of 5 stars   (1 Customer Reviews)

30-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Prevents battery damage from harmful overcharging and uses automatic multistage charging to extend battery life.

- 34276119
by:

Have not had chance to install it on my houseboat yet 654880


1
1

Ask the Experts about this Go Power Accessories and Parts

Do you have a question about this Accessories and Part?



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Expert Research:
Jameson C
Edited by:
Amanda M
Written by:
Halie H
Updated by:
Alex H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.