Replacement Wall Controller for Furrion RV Water Heaters

Video Transcript for Review of Furrion RV Water Heaters - Replacement Wall Control Panel - FR48NR

Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this replacement wall controller for your Furrion RV water heaters. Now, this will replace the wall controller on your Furrion RV water heater. It is a wall-mounted controller. And when this is installed to 12 volt power, the unit does light up.

It'll have, on the very front here, an on and off switch that you can turn it on with. Up here it'll have a white LED display, which will display the temperature, time, and water pressure. And it even has an alarm that'll alert you when the pressure gets too low. Also, right down here by the on and off switch, there is a temperature unit. Again, you can push it to either Fahrenheit, it'll read Fahrenheit or Celsius.

And again, you'll notice up here, right under the LED display, it'll offer lights that'll show you if it's in the fair, Fahrenheit mode, in the Celsius mode. If the power mode is on, it'll show a light. And then there's a flame mode. It does, also, over here, have an up and down arrows that'll let you adjust the water temperature by degree. Now, this controller is designed to work with all Furrion water heaters.

Again, it's designed to be connected to 12 volt DC power. The two wire leads, they're about eight inches long. And I wanna give you the overall dimensions on this. The diameter on the controller is gonna be right at 4 1/2 inches. The depth of it is right at 7/8 of an inch deep.

But that should do it for the review on the replacement wall controller for your Furrion RV water heaters..