bing tracking image
  1. Accessories and Parts
  2. Furrion
  3. RV Camera System
  4. Camera
  5. Rear Camera
  6. Black
Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1
Furrion

Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1

Part Number: FCN48TASF
In Stock
$174.94
Retail:$235.95
You Save: $61.01
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Waterproof, wireless backup camera with night vision has a 120-degree viewing angle and motion detector to minimize blind spots and prevent accidents. CMOS sensor creates high-quality digital video. IR cut filter blocks infrared light in daylight. 1-800-940-8924 to order Furrion accessories and parts part number FCN48TASF or order online at etrailer.com. Free expert support on all Furrion products. Great prices and Fastest Shipping for Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (61)
  • Q & A (0)
  • Photos
  • Used (1)

Furrion Accessories and Parts - FCN48TASF

  • RV Camera System
  • Camera
  • Rear Camera
  • Furrion
  • Black

Waterproof, wireless backup camera with night vision has a 120-degree viewing angle and motion detector to minimize blind spots and prevent accidents. CMOS sensor creates high-quality digital video. IR cut filter blocks infrared light in daylight.


Features:

  • Wireless backup camera improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
    • Gives you a 120-degree viewing angle
    • Designed for use with your Furrion Vision S backup camera system (FOS43TASF, FOS05TASF, or FOS07TASF)
  • CMOS sensor creates high-quality digital video in full color
  • Built-in microphone picks up audio
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • Motion detection triggers monitor (sold separately) to power on
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • Camera can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation


Specs:

  • Overall dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
  • Mounting hole spacing:
    • Horizontally: 3-3/4" center to center
    • Vertically: 15/16" center to center
  • Resolution: 720 x 480
  • Voltage: 12V - 24V DC
  • Cable length: 6'
  • 1-Year warranty


Infrared LED Night Vision

LED Night Vision

This camera has 8 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Built-in Microphone on Camera

Camera Microphone

The camera has a built-in microphone that picks up audio and sends it to the monitor on your Vision S wireless RV backup camera system (sold separately). This allows your friend or family member to relay information and instruction to you, providing peace of mind as you work together to safely maneuver your RV.


Motion Detection

When used with your Furrion Vision S wireless RV backup camera system (sold separately), the motion detect feature allows you to set the motion sensitivity level of your camera to low, medium, or high. On the low setting, your camera will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, it will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.



2021123624 Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1

Replaces 733322 and 110414

Alt FCN48TASF

Alt 405343ET

Installation Details FCN48TASF Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1 - FCN48TASF

Average Customer Rating:  4.9 out of 5 stars   (61 Customer Reviews)

Waterproof, wireless backup camera with night vision has a 120-degree viewing angle and motion detector to minimize blind spots and prevent accidents. CMOS sensor creates high-quality digital video. IR cut filter blocks infrared light in daylight.

by:

I have three cameras mounted to my 5th wheel. I added a foldable bed cover to the Ram 3500 and could no longer see my pin when backing to hitch up. Bought this camera, made a magnetic base and now use it on the tailgate to look at the pin when backing.
It married right up to the monitor, however the picture was upside down. That was taken care of in the monitor settings.
Powered the camera from the 4 wire tail light trailer plug on the truck.

Works great, shipping was fast and etrailer had the best price.



by:

We use this system on dump trucks for rear view safety and load management. The wireless feature is great for damage management associated with backing through trees by eliminating the video cable. The plastic base is not substantial enough to withstand a dumping gate so we make modifications to make it work. If the power is derived directly from the batteries the video performance is excellent. Of course that complicates installation as locally available DC isn't of sufficient quality.



by:

Package arrived super quick... etrailer always delivers quality products in a timely fashion. Thanks!



by:

It was super easy to connect to our RV that was already pre-wired. It was easy to pair with the monitor we had previously. We watched a video from etrailer which was very clear. Shipped quickly and arrived on time



by:

Easy set up and really great visuals. I’m using this in the bed of my truck to watch the trailer connect.



by:

camera works well old one did not have sound I like that option



by:

Works perfectly. Put on the back of a 26' 5th wheel. Connected to the driving lights. Leave it on while driving and it acts like an extended rear view mirror.



by:

My previous camera's lense became clouded. I replaced it with a new camera and it has worked very well. Delivery was very quick.



by:

Camera works great



by:

The back camera was an awesome addition to my enclosed trailer an is greatly appreciated when backing up!



by:

Good price for a good camera



by:

Super fast shipping



by:

I have progressed through 3 different RV's. I have installed the Furrion product on all 3 of them and have been very satisfied with the product.



by:

everything I have received from etrailer has been great, the only complaint is the amount of time it takes to ship and the time it takes to get to me. thank you.



by:

It arrived earlier than expected.
I haven't
had the chance to install it yet.
Looks like its easy.
More to come.

Daniel

12/11/2022

Works Great. No issues



by:

Thanks Carol I did received my camera there was the antenna that was missing but you sent me the antenna I have not yet installed as of yet because of weather I will send pictures when finished



by:

Met all expectations. Good job.



by:

Arrived on time I haven’t opened the box yet



by:

furrion camera work great



by:

Good rear "view mirror" but clarity not so good as there is a lot to reflections and image distortions.



by:

Fast service, great lady that took my call, I will report more when I get it installed, thanks much

Don

11/17/2020

Great, best thing I’ve bought for my trailer



by:

Jerred’s c/s was superb. Had it not been for his very timely response on my inquiry the purchase would not have happened. To top it off, my inquiry was made on Christmas Day, and he responded the same day!!! Very admirable and unbelievable!!!



by:

Technical help was great. Helping to get the correct part.all follow ups done quickly. Shipping took along time to get into Canada but part did arrive and was correct



by:

David

1/5/2023

ok



by:

Happy with this product. Has served my needs well while traveling down and trough busy interstates and work well to help back into tight Rv sites


25
61
Show More Reviews

See what our Experts say about this Furrion Accessories and Parts

  • Which Monitors Are Compatible With Furrion Vision S Wireless RV Backup Camera
    The Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF is compatible with the following monitors: -Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR (Different part numbers are 2021124097, C-FOS07TAPK-010, and 405354ET) -Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR (Different part numbers are 2021124300, C-FOS07TAPK-009, and 405351ET) -Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System...
    view full answer...
  • Replacement Furrion Vision S Wireless RV Camera
    Yes, the Furrion Vision S Wireless RV Backup Camera w/ Night Vision item # FCN48TASF is the replacement camera for the Furrion Vision S Wireless RV Backup Camera System item # FOS05TASF you already own. The entire kit is a different stock number than your FOS48TABL. This camera will do the job for you. I have linked an installation video below.
    view full answer...
  • Will Replacement 4.3" Monitor Work With Furrion Camera Mounted on FRCBRKT-BL
    The # FRCBRKT-BL is actually the mounting bracket but it will still be the Furrion Vision S Wireless RV Backup Camera # FCN48TASF mounted on your bracket. Your camera is compatible with the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR. If you want to upgrade to a larger side we also have the 5" # FR97FR or 7" # FR47FR which are also compatible.
    view full answer...
  • Availability Of Replacement Screws For Furrion Vision S Wireless RV Backup Camera FCN48TASF
    Hello Mary, thanks for reaching out, and for your recent order. I am sorry to say that we do not offer replacement screws for the Furrion Vision S Wireless RV Backup Camera # FCN48TASF. Your best option for this will be to try to find new screws at a local hardware store. You should be able to just bring the bracket with you to the store to help find a compatible screw.
    view full answer...
  • Troubleshooting A Furrion RV Backup Camera That Wont Power On
    If the blue light on the camera of your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF isn't coming on then you aren't receiving enough power or it has some kind of internal malfunction. I recommend first checking the power at the camera with a multimeter like the # PT89ZR to see how much voltage it's actually getting. You can remove the four screws holding the camera in the shark fin mount to get to the wire and test the voltage....
    view full answer...
  • Recommended 7 Inch Replacement Monitor for Furrion Vision S Camera System
    For a 7" monitor you're going to want the Furrion Vision S Wireless RV Camera System item # FR47FR. This monitor will pair with your Furrion Vision S Wireless RV Backup Camera item # FCN48TASF.
    view full answer...
  • Is There A Way To Clear Up A Blurry Image From A Furrion Vision S Rear Camera
    You've actually done everything you really can do to try and troubleshoot the blurry image from your rear camera so you are in the replacement phase now. Most likely the seals on it failed and allowed moisture to build up inside the lens causing the obstruction. Instead of having to repurchase the entire system you can get just the rear camera # FCN48TASF to save a bit of money. I've attached a short video below where Dave will walk you through replacing a bad rear camera to help walk...
    view full answer...
  • Troubleshooting No Power To Furrion Vision S Camera On a 2021 Jayco White Hawk Travel Trailer
    The Camera # FCN48TASF for the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF is powered off the running lights for your 2021 Jayco White Hawk travel trailer. You will need to make sure your tow vehicle is connected and the running light switch is turned on and powering the lights on the trailer. There are 2 instances I am aware of that would still cause the camera for the trailer to come on. First is some newer trucks like the Sierra and Silverado will require a 7-Way Vehicle...
    view full answer...
  • Can I Add A Second Furrion Camera To My Existing Furrion System
    I do have a solution for you. It will require you to get a larger monitor. You will be able to add a second camera to your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen, part # FOS05TASF The second camera is part # FCN48TASF. Unfortunately, there is not a specialized mount for this camera to mount to your pickup truck. You will have to find a way mount the camera. I have included a product description link, a video installation link, and the...
    view full answer...
    Image 1 for
  • Which Replacement Power Cable Will Work For A Pre-Wired 2020 Forest River Wildwood X-Lite?
    If you have a RVS branded camera, or another branded camera that utilizes an RCA connection, then yes the Rear View Safety Female Power Cable # RVS-RCA-P will work for you. However, if you have the Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF, then you'll want to use the Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems # FRCBRKT-BL instead.
    view full answer...
  • Backup Camera Solution for Rear of Truck and Trailer with Single Monitor
    I'd go with the Furrion Vision S system part # FOS05TASF with the additional camera # FCN48TASF and you'd have a setup that would install relatively easy and provide you with the best wireless reception.
    view full answer...
  • Extra Furrion Camera Needed To Expand Furrion Vision S Camera System To A Second RV
    Yes, you just need the Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF. This replacement camera comes with the mount and a splice in wire harness that you can use to tap into a rear running light on your truck bed camper to power the camera. You'll want to use some heat shrink butt connectors # DW05744-5 for a waterproof connection. I typically cut the casing back a bit more on the Furrion wire harness and double it over to thicken up the portion crimped into the...
    view full answer...
  • Replacement 7 Inch Monitor for a Furrion Vision S Camera
    You're going to need the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System item # FR47FR you were looking at. This 7" monitor will work with your Furrion Vision S wireless RV camera item # FCN48TASF.
    view full answer...
  • Backup Camera Systems Capable Of Running Cameras on Both the Truck and Trailer
    You have a couple options depending on if you want to install a Hardwired # RVS-776614-213 or Wireless # FOS07TASF camera system. The wired system comes with a camera for the truck and another for the trailer along with the connections and removable harness needed for the camera. The Wireless # FOS07TASF is only going to come with one camera but you can add additional Rear # FCN48TASF or Side # FCE48TASL cameras. This system is able to be paired with up to 4 total wireless cameras.
    view full answer...
  • 4-Camera Furrion Vision S Observation System
    Good question, and while the FOS07TAPT has been replaced, we can get you the exact same configuration, 4-camera Furrion Vision S system, it will just require adding the additional sharkfin camera (which is the same as the side camera you mentioned). So, to get this what you will need are the following: - Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras - 5" Screen # FCE48TASL-05 - Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF These are the exact...
    view full answer...
  • Is The 7" Furrion Camera Monitor Compatible With The 4.3" Monitor Furrion RV Back Up Camera System
    Yes, the 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR will pair with the camera on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF. This will also allow you to add three more cameras to your system since the 7" monitor will allow up to 4 cameras. You can add on side marker cameras # FCE48TASL to improve visibility and obstacle detection for your RV or camper and/or an extra camera # FCN48TASF above your...
    view full answer...
  • 4th Camera Option for the Furrion Vision S Wireless RV Camera System
    The Furrion Vision S Wireless RV Observation Camera System, # FR98NR that you linked to comes with 3 LED waterproof cameras with night vision; 1 third brake light camera and 2 side marker light cameras that wire to your turn signals and of course the touch screen monitor which can has availability of a 4th camera. You can add a 4th camera with, # FCN48TASF and have it mounted anywhere. An alternative and my second recommendation, is the Rear View Safety Backup 4 Camera System # RVS-062710...
    view full answer...
  • Wireless RV Backup Camera Monitoring System For a Jayco Eagle 5TH Wheel Camper
    The Furrion Vision S Wireless RV Backup Camera # FCN48TASF is only compatible with the Furrion Vision S monitors. We have them available with two different screen sizes. 4.3" Furrion Vision S Wireless RV Backup Camera System # FOS43TASF 5" Furrion Vision S Wireless RV Backup Camera System # FOS05TASF If you choose the 5" screen you can also add the LED Marker Light RV Side Cameras # FCE48TASL that will mount in place of the side marker lights near the front of your Jayco Eagle 5th wheel....
    view full answer...
  • Recommended 7" Monitor for a Furrion Camera # FCN48TASF
    Yes, there is a compatible 7" monitor. You will want the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System item # FR47FR. The item # FR47FR 7" monitor will work with the camera item # FCN48TASF that you have now.
    view full answer...
  • Furrion Back Up Camera And Hitch Alignment Cameras
    Nice question. When it comes to the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 you can add multiple cameras. However there is not a mounting bracket designed for the tailgate or hitch area to mount the Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1 # FCN48TASF. So yes you can but no there is not a bracket so you will have to fabricate your own. Another solution would be to go...
    view full answer...
  • Adding A Door Camera To A Furrion Vision S Wireless RV Camera System
    To add a door camera to your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 you'll just use another Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1 # FCN48TASF and place it above your door.
    view full answer...
  • Will The 12V PWM Filter Fix My Power Issue With My Furrion Vision S Cameras And My 2021 GMC Sierra?
    Sorry to hear about your troubles! That is correct, the 12V PWM Filter for RV Backup Camera Systems # VGR64VR will provide a steady current for the camera and will take care of the issues you're having with your Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF and side cameras. I have included a video of # VGR64VR being installed on a 2018 Forest River Grey Wolf for you to check out as well.
    view full answer...
  • Will Older Furrion Monitor Work with Furrion Vision S Cameras
    The monitor of your older model Furrion system part FOS48TAPK-BL is not compatible with the current cameras and will not pair with them. You'll need a new kit all together with part # FOS43TASF.
    view full answer...
  • Recommended Back Up/Observation Camera System To Replace Obsolete Voyager VOM74WP
    I have a complete replacement option for you, but unfortunately both the Voyager Camera Model VCCT130 and Monitor VOM74WP have been discontinued and Voyager no longer makes cameras that use the weather proof 4 pin connector. You will need to replace your entire camera system to get a new rear view camera. I recommend going with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 which includes a new 5" monitor, two side marker cameras,...
    view full answer...


< Previous
123. . .10



Do you have a question about this Accessories and Part?


Used Items Available
Used Picture for Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

$173.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Matthew E
Updated by:
Matthew E
Employee Carrie F
Updated by:
Carrie F
Employee Amanda M
Edited by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee David F
Test Fit:
David F
Employee Kevin C
Test Fit:
Kevin C
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.