Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Repair kit contains all necessary components for your Fulton channel-tongue, hand wheel coupler for 2" to 2-1/8" ball and 2,000-lb capacity. Does not include housing. For use with Fulton 308 series couplers.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we'll be having a look at the Fulton Repair Kit for Fulton Channel Tongue Couplers with Hand Wheel Latch for 2" to 2-1/8" balls. Part number F520801. Here's what our repair kit comes with. We have our new hand wheel latch, our new roll pin to secure our latch to our threaded rod here. That way you can't take a latch all the way off. Your spring, your ball catch, and then your ratcheting mechanism to make sure that your hand wheel doesn't back off. The reason you want one of these kits is in case your coupler we're to become damaged.
This will save you time and money, so you can just repair the necessary parts. Over time, these threaded prices here can become damaged. Your hand crank could become difficult to move. Most times, those couplers are welded on, so you have to spend more time and effort. If you don't have a welder, it makes it a very difficult repair process.
This repair kit will work with Fulton 308 series Channel Tongue Hand Wheel Couplers with a 2" to 2-1/8" ball. We have a coupler here off of our trailer. We'll show you how to install replacement parts. Normally, we would have to remove our roll pin right here. We've already removed ours. We will skip that, and we'll show you how the rest of it goes.
We'll press up on our ball latch on the bottom, push down on the ratchet mechanism, spin off our hand wheel. We'll drop out everything from the bottom. We'll set that aside. We'll take our new ball latch, drop in our threaded rod, attach our spring. Once we have that set up, I always like to do this part here first.
It makes it easier. Take our ratchet mechanism, drop it on in. You can hold it in place, while we raise up our assembly. Take our hand wheel, thread it on. You can hear our ratchet mechanism work as we turn it. That's what tightens our coupler down onto our trailer ball. Tighten this down all the way, so it easily install a roll pin. You see our roll pin hole sticking out now. Take our pin, get it in position, and we'll tap it in with a hammer. We have it all the way through now. This roll pin, as you see, when you uncouple our trailer from our tow vehicle, that roll pin stops our hand crank, so you can't take it off all the way and lose your pieces. That completes our look at the Fulton Repair Kit for Fulton Channel Tongue Couplers with Hand Wheel Latches for 2" to 2-1/8" balls. Part number F520801. .
Average Customer Rating: 4.8 out of 5 stars (92 Customer Reviews)
Repair kit contains all necessary components for your Fulton channel-tongue, hand wheel coupler for 2" to 2-1/8" ball and 2,000-lb capacity. Does not include housing. For use with Fulton 308 series couplers.quick shipping, great product
worked perfectly,Repaired my trailer so I was able to use it again wuth very little cost.
fast delivery, no issues, great product. I will purchase from again when needed.
Product was exactly what I needed but your customer service was awesome. Thank you so much for your help Nicole R.!
Excellent Kit!I've been looking for parts to repair the coupler on my 1961 U-Haul for several years. This worked great and keeps the trailer coupler from loosening while towing.
My trailer is from the 50's and I was sure there was no way to replace the broken coupler. Not only did it fit perfect, etrailer sent a picture on how to assemble and a sheet with phone number to call if any questions. Very rare these days.
Thanks,
I have an OLD trailer and the hitch assembly broke and needed to be replaced.
etrailer.com is the ONLY place that I could find that carries this repair kit.
Needles to say this Saved me a ton money and time.
I Ordered the kit late wednesday evening and it was here Monday
The diagrams on the the instructions were very EZ to read and follow.
My questions received a quick response with the solution to my problem. The repair kit for my coupler arrived sooner than expected and was a perfect fit: my 60+ year old trailer hitch is fully operational again! Thanks for the great service.
Dave C.
11/30/2017
I havent had to use it, as it is on a hitch on a Jeep that is only used in emergencies. It worked when I bought it, so I see no reason why it shouldnt operate just fine. It still looks good!
Happy I found your company .I own an older 1974 U-HAUL Camper and the Coupler had just gotten weak over the years and broke .I spent hours on the phone with U-HAUL and they could not help me with a replacement .The quality of your product looks great , even stronger than the original. Thanks for getting me on the road ,I'll be a happy camper again .
Fast shipping. Fit as advertise
Bought a trailer, the coupler was missing parts. this kit should fix it!
These Fulton Coupler parts are hard to find. Good price, very reasonable shipping rates, fast service, worked great.
Got this for a older trailer that has a Fulton ball hitch which the original's locking tab finally broke and the spring went missing. One feature I like about these types is the means of removing the "guts" of the hitch I did not use the rolled pin that came with it instead I use a clip style cotter key that I can remove and remove the "guts" to prevent theft.
James H.
4/21/2021
Good works and fits well
Little pricey, but was exactly what I n eeded.
Brian S.
11/13/2022
Its working as well as it did after I installed it. I am still happy with my decision on purchasing it. The new owner of the trailer is quite pleased with it too.
Parts fit absolutely great, it made the coupler complete,working right and most important SAFE.
I inherited an old 1969 boat and trailer. I planned to tow it to a shop for repairs when I discovered that a few of the parts on the old coupler were either rusted or missing. I was thrilled when I saw that I could replace the required parts at etrailer.com. I located a coupler on the website which matched the coupler on the trailer. A few days, later I received the kit in the mail, and it even came with a picture of how to assemble the unit. It fit on the old trailer and worked great! Thanks for stocking the old stuff that we all need from time to time.
First, I thought that these where no longer made since the trailer is from the early 40's and is home made. Even the axle is unique (cannot find information on it or about it) I am restoring this trailer to be my light utility trailer for beach and picnic gear and minor trips so I wanted to make sure the hitch devices are good and it fit greatly minor differences to the old one though may order another as a spare since I remove these parts from the hitch and put a lock (double anti theft protection) when leaving the trailer somewhere.
The product is an exact replica for a hopelessly rusted part on a 64-year-old box trailer I built long ago. I was ecstatic to find it since otherwise I would have had to re-design the entire front end. The trailer is still being rebuilt but this product is scheduled for action soon. Thank you for having this in your stock. Richard A. Moore, Solana Beach, CA
I purchased this to replace a broken one on a teardrop camper trailer. It arrived on time and after about 30 seconds had it installed on the hitch without any issues. Easy ordering process and prompt delivery with no issues at all.
Perfect fit and received part’s quick
The product worked great but what really impressed me was the customer service. The folks who helped me with this product spent far more time and effort on getting me the right product than I would have expected for a sale this small. They were persistent, diligent, reliable and courteous.
Norm C.
10/8/2018
The part worked great.
It took time for my order because of the manufacturer and etrailer kept me informed as the process went along. Thanks for your great customer service.
Peter B.
6/24/2018
On year, working great. Thanks.
This part was not easy to find. Thank you eTrailer for having it in stock! Easy to install works as expected.
Muss M.
8/21/2016
As expected, no concerns.
Shipping was great to Ga. The Kit That I needed was 61-0801. The only 1 listed was 52-0801. But I able to used parts out that kit to make the repair. Had to reuse the bottom ball coupler. The spring was hard to install on this type to get in. I compressed the spring with small cable ties to installed, then cut ties after installation.Works Great!! Thanks Again etrailer.com.
PS. only reason I didnt give it 5 Stars. My tongue was Fulton 34-318
E Trailer provided shipping information the best I have ever seen.
Parts arrived quickly as scheduled by E Trailer.
I will do business with you again.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jay
12/4/2012
Youre not kidding about the service being exceptional. I needed a repair kit for a Fulton 22-300 coupler and thought this might be it but the weight capacity was too light. I called and asked Regina about it. She went to the trouble of calling Fulton to ask if this was the proper part. It turned out it was not and in fact the part was no longer available from Fulton. They did have the complete coupler though, so for a few dollars more shes sending me a complete replacement coupler. My old one is welded so I will just strip the parts out of the new one and I will be in business.To cap things off, since I had originally ordered this with something else that qualified for free shipping last night, she credited me for the shipping cost of the new coupler.You just cant ask for better service than that.