Pull pin fits Fulton F2-series swing-up jacks. Includes spring and retaining ring.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be showing you how to replace a pull pin kit for a Fulton F2 swing-up jack, part number F500136. This is a very cost-effective way to replace a worn out or broken pin without having to replace your whole jack. In your replacement kit you'll find the pull pin, the spring and a clip to hold it in place. As you can see, the handle on our pull pin is broke, so in order to access this we're going to have to take off these four bolts. Once you get your four bolts out, you're going to make sure you set them aside and hold onto all your hardware so you can remount your jack back on your trailer. Now that we have our jack removed from the trailer, what we're going to need to do to get this pin out, we're going to remove the spring. What I'm going to use is needle-nosed pliers and a flathead screwdriver. What you want to do is you want to compress the spring enough just to get the tension off of the clip. Once you've got the clip out, remove your pin and your spring. Now that we've removed our old one you're going to take your spring, push it down in place, take your pin, you want to make sure that when you put your spring and your clip in, the ring where your clip goes on is down along that edge there. As close as you can get it.
Now we're going to go ahead and replace our clip to hold it in. Set that down in the groove, push into place till it locks. Once that's all in place, you got a working pin. Now that we have our pin installed, we can go ahead and reinstall our jack on our trailer. Take your hardware that you took off. Now that we've got our bolts tightened down, you can see we have a functional jack, and that'll do it for the replacement pull pin kit for the Fulton F2 swing-up jacks, part number F500136..
Average Customer Rating: 4.8 out of 5 stars (51 Customer Reviews)
Pull pin fits Fulton F2-series swing-up jacks. Includes spring and retaining ring.I was impressed that this part was available! Guess I can retire my vise grips I was using due to the broken plastic. A close examination tells me there is a slight modification to this one over the original, that gives the "plastic part", more structural strength. The pricing was reasonable and service and delivery was exceptional!
Cecil J - 08/31/2021The pull pin handle broke at 11 yrs of age and one of the gears broke in the landing gear at 13 yrs of age. The jack freezes in wet cold conditions and a torch is required to thaw it to get it to work properly. The screws that secure the top cover screw into plastic and over time the plastic will strip out. Had to install screws one size larger diameter in order to tighten up. Fulton F2 could be improved by having the screws on the top cap screw into metal instead of plastic. Jack does have a great handle on the crank handle.
Great for rebuilding the jack. No matter how I take care of it, the salt water eats away and the jack has to be rebuilt.
little bit of a learning curve for me. ...but once i figured it out ( pull handle has to be in full down positi9on ) it was easy to install. works great. timely shipping
Direction were clear. Installation was easy and it work fine.
Chip - 06/04/2017I had been surviving without the pull grip since I boke it off a few years ago. When ordering some other parts for my boat trailer Fulton Jack I found this replacement. Easy Pezzy replacement although I still fight that little clip on the end where ever I find them.
Purchased replacement parts for Fulton F2 swing up jack. Etrailer.com had parts in stock, shipment was prompt and parts were exactly what I needed to repair my trailer jack. Excellent service.
I was happy with your help so I can continue to use my Jack on my boat trailer. Now with that said, I was really disappointed about the warranty when I bought the Jack. I was told it was a lifetime warranty. I would think that when you took over the products you would still warranty the lifetime warranty.
Very happy with the e-Trailer service.
It's great to have etrailer around. I had a broken pull pin on my Fulton trailer jack and was thinking I was going to have to spend over $125 for a new one. Thankfully, I found a replacement pin for under $20, it took me less than 15 minutes to replace and I am back in the game. Thanks etrailer.
Fast, efficient delivery. Priced well.
Perfect replacement on my F2 trailer jack. After one year it is still just like new. I should have changed this out as soon as my original broke but suffered for over a year: mistake.
Works great and easy install
I purchased a Fulton tongue left for my trailer a few years ago and this product is the best I have used , made of quality materials. I had to replace the lock pin because I did not lubricate and the salt from the roads combined with the cold caused me to try and push it loose with a two by four, ( all I had at the time). Needless to say I broke off the handle. Order a new one from etrailer took me 15 mins to replace and I was good. This site even had a video on how to replace the pin, took all the guess work out of it. Moral to the story, a little 10w 40 and you won't have to deal with this.
Great replacement part. E-trailer sent me a video explaining replacement instructions. It took me about 15 minutes to remove the old part and install the new one.
Rich G - 06/27/2017All good Thanks
handle works perfectly.
fulton T part broke on tongue jack. Mfg recomended you. I recieved part in 3 days and price was right . This is swivel pin for jack. 4th time I used Etrailer for parts/items. Always as described and priced fairly Steve
Arrived on time and fit perfectly, still working a year later.
As always I had great service and fast delivery. I used this to replace the handle on my boat trailer. It was an exact match to the original. This was an easy install after watching the helpful video.
I have not used the part as of yet. Due to the fact that the old tongue jack was not fixable total rust case. I bought a new jack but now I do have a spare handle.. I am sure someday I will use them never hurts to have spare parts you just do not know when you mat need them.
Very happy with my purchase and how quick it showed up in Canada. Thanks
Exactly what I needed. E-trailer had a picture that showed the backside of the jack so I could see how it was installed. Came in a week and am extremely happy with the service.
Thank you so much please pass this message to your people you were so helpful with my order and I have never had such great customer service like you have, you are a GREAT asset for etrailer on the phone. Thank you does not do your services justice, THANK YOU AGAIN.
The pin is the pin, no comment on the pin itself. Finding it easily online and having it show up quickly with a few key strokes was awesome. Etrailer.com did what they promised.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.