Video Transcript for Review of Fulton Replacement Parts - F2 Gear Set - F0133312S00

Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the replacement drive gear assembly. This is going to be a specific fit for the Fulton F2 fully enclosed trailer winch. That part number is available here at etrailer.com and it is FW32000101. So this is going to give you all those internal components to get your winch back to operational.

Maybe something happened with your gears, they got bound up, bent, or damaged, or maybe it's just rusted out over time and you want to replace those gears with some fresh assemblies. So this is going to give us everything we need to do that; we'll have our end cap here, which our handle attaches onto. So we'll also have all the parts to go in there. We'll just kind of assemble them a little bit so you can see all the pieces that we get with our kit.So these all fit together like a little puzzle. Have our gears to go in place, to keep everything moving properly.

Also, of our smaller gears, the bushings to go on the other end so that this comes out of the other side of our winch. And there's also this O-ring that goes on the cap to help provide some extra watertight protection in there. So it should fit into the little groove going around the outside of that. You just press it into place to get that in there.It also comes with the three screws to attach that to the rest of our winch housing. See, we also get our three gears here, our four smaller gears, and the rest of the hardware.

So what if something got broken along the way, or you just want to do some maintenance, maybe swap out a couple of parts rather than have to get a whole new winch assembly, this will allow you to do that.So that's going to do it for our look at the replacement gear drive assembly for the Fulton F2 fully enclosed trailer winch. If you need a replacement handle or any other replacement parts, you can always turn to etrailer.com to find those. Thanks for watching..