Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the brass inflation valves for your Firestone Ride-Rite air spring kit. (2) 1/4" Inflation valves included.
Features:
Note: The construction material of the fittings may vary.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a quick look at the replacement brass inflation valves. These are going to fit your quarter inch air tubing that comes with most of your air spring kits. So this is a specific fit for the Firestone kit, but it really will fit just about anything that has that quarter inch tubing. It's going to also have the nut to tighten that down and the threaded caps as well so we can keep out any dirt or debris from getting into our Schrader valve and causing any issues.
So if something happened to your original valves, maybe the threads got marred up or just wasn't holding air as it should, these are going to be a direct fit for you so it should get you back to being able to have a working system again. These are going to be push to connect fittings, so to remove them from your old ones usually that fitting is going to be kind of pushed out. If you push in on that collar and then remove your tubing, that's going to be the easiest way to get that out of there. So once you put your tubing in place, you'll push it in and then it should go a little bit further and it should be all sealed up and when you tug on that line, it shouldn't come out. So something to keep in mind there,It's also a good idea to spray it down full of soapy water and check for leaks.
If there's any little bubbles forming kind of slow bubbles, that means that you have a leak and there's air escaping somewhere in there. Sometimes it can actually be from grooves carved into your airline, especially if you happen to drag it across any sharp edges, it can cause little grooves there. And then that's where that air is escaping out around that push to connect fitting. So make sure that you're being careful with that airline and not dragging it across any sharp edges.But that's pretty much all there is to it for our brass inflation valves. I'm going to give you a measurement here just for reference: so the overall length of our valves with the cap removed is about one and three quarter inches, and then it's about a half inch wide on the flats of each side.I hope this video has been helpful in determining if this is going to be the right fit for you.
If not, we do have a lot of other options available here at etrailer.com, a lot of other replacement parts for your Firestone air systems, so hopefully we can find the right part to get you back out on the road and enjoying your vacation or enjoying your work. Thanks for watching and we'll see you next time.
Average Customer Rating: 4.7 out of 5 stars (38 Customer Reviews)
Replaces the brass inflation valves for your Firestone Ride-Rite air spring kit. (2) 1/4" Inflation valves included.Purchased these valves to replace some badly corroded load leveling system valves. These valves have shown no signs of significant corrosion and have held pressure reliably for months at a time.
Great products and the best customer se rvice!
works as advertizes
They work great
I had to purchase replacement fittings to stop the air leak in the Firestone system.
This was my second time to use etrailer and was pleasantly surprised by how fast I got what I needed. Unfortunately one of my items was not in stock after I placed an online order. When I called to cancel that part before I got off the phone, I had an email confirming the cancellation and a new order with all of the in stock parts. Shipped the next day and I had it a day later. You can't beat service like that and I wont try. They are great at communication and do what the say they are going to do.
Difficult to remove air hose if installed incorrectly
great quality. A lot better than the original ones that came with the air bags.
Worked great thank you
Great!
Perfect fit and fast delivery.
Good service, part as described.
Had to replace leaky valves. These worked perfect. 5 minute job.
Worked like a champ easy install
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill W.
1/18/2025
These air valves look as good as the day I put them in a year ago. Absolutely no air leaks and theyre holding up very well.