Hitch Lock and Adjustment Pin Lock Set for 2" Flash Solid Steel Adjustable Ball Mounts

Video Transcript for Fastway Ball Mounts FA86-00-4200 Review

Speaker 1: Today we're taking a look at a hitch lock and adjustment pin lock set for 2" flash solid steel adjustable ball mounts. This lock set helps prevent theft of your flash solid steel ball mount, and of your hitch trailer. So, both of these locks are identical. One would be used as a hitch receiver lock. That's used in place of a standard hitch pin and clip to secure the shank of your ball mount end to the receiver of your hitch. The other one, right here, the locking adjustment pin is used in place of one of the standard adjustment pins to secure the ball platform to the shank of the ball mount.So I do have a mount here today just to give you an example.

Basically, what I'm talking about is we're going to take . I already did it, take one of the pins out from the platform. I'm going to take one of the locks here, it's going to go through and then lock on the other side. So by doing that what we're doing is we're locking the platform of the ball mount to the actual shank of the mount. Then we would also want to take out the standard hitch pin and clip that secures the unit into the receiver tube of our hitch and replace it with our hitch lock.

So you place that through, make sure it goes through the pinholes of the hitch, through the pinholes of the ball mount. Then you just move it to a locked position and now the actual mount is locked to your hitch also.So it's a nice design. It's a really nice lock set. Sturdy and durable steel construction. Also, it has the tube key lock cylinders to provide better security when compared to standard key mechanisms.

Much harder to pick and they resists drilling. And are a lot more difficult when it comes to trying to duplicate keys.Each lock comes with the weather resistant rubber dust cap which keeps the cylinders free of water, dirt and debris. Two keys are included. Again, this lock set is designed for the Flash solid steel adjustable bar mounts for 2" trailer hitch receivers. Each hitch pin, or pin diameter, is 5/8th of an inch.

The span, that's the usable link, so from the inside edge of this barrel to the inside edge of the barrel on the other side usable pin length is 3-5/8 inches. Over all length from edge to edge is 6-3/4 inches and the product is covered with a lifetime limited warranty.That's going to do it for today's look at the hitch lock and adjustment pin lock set for 2" Flash solid steel adjustable ball mounts.