1. Accessories and Parts
  2. Fastenal
  3. Wiring
  4. Wire Connectors
  5. Ring Terminals
  6. 12-10 Gauge
Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

Item # 44-5310A
lowest price pledge
Retail:$2.60
Our Price: $0.42
You Save: 84%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.02 lbs
Quantity: 
In Stock, Ships Today
Fastenal Ring Terminals Accessories and Parts - 44-5310A
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Call 800-298-8924 to order Fastenal accessories and parts part number 44-5310A or order online at etrailer.com. Free expert support on all Fastenal products. Guaranteed Lowest Price and Fastest Shipping for Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (20)
  • Q & A (275)
  • Videos (1)
  • Photos
  • Why etrailer?

Fastenal Accessories and Parts - 44-5310A

  • Wiring
  • Wire Connectors
  • Fastenal
  • Ring Terminals
  • 12-10 Gauge
  • 3/16 Inch


Ring terminals are used for all types of electrical work where wires need fastening

  • For use with 12-10 gauge wire
  • Stud size: 3/16"
  • Vinyl insulation sleeve is yellow


44-5310A Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID





Video of Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for 3M Wiring 44-5310A Review

Today, we're going to review part number 44-5310A. This is the 3M ring terminal for 12 to 10 gauge sized wire with a ring inside diameter of 3/16ths of an inch. These ring terminals are used for all types of electrical work where wires need fastening. This one is for use with a 10 or 12 gauge sized wire. It does have the vinyl insulation sleeve, which is yellow, and then the ring terminal, the inside diameter is 3/16ths so it is designed to fit on a stud size of 3/16ths of an inch. Basically, want to show you here, I got an example right here of a 12 gauge sized wire. What you would basically do is just side this into ...

You don't really want to have it sticking out. You could, but what I like to do is put it right there. Then, you're going to crimp, have a set of . This is a wire stripper with, down here is the crimping portion. If you just stick that in the very .. Put it right over there and then all you have to do is push down just like that.

Once you push down and hard enough, you can see that it crimps that wire to this ring terminal. You can see that you have a good connection. That's the reason I don't like to have the wire stick out too much because you don't want any of that exposed so if you just keep it under that insulation sleeve, you should be in good shape. That should do it for the review on part number 44-5310A. This is the 3M ring terminal for 12 to 10 gauge sized wire with the 3/16ths inch ring inside diameter. .


Customer Reviews

Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID - 44-5310A

Average Customer Rating:  4.8 out of 5 stars   (20 Customer Reviews)


- 44-5310A
by:

Great service and fast delivery! Awesome website and easy to find what I needed! 725856



- 44-5310A
by:

Great product and price. No complaints 670485



- 44-5310A
by:

Not a cheap connector 668180



- 44-5310A
by:

Odelia waited on me and was very helpful as well as professional. I certainly would order from her again and recomend etrailer to anyone who needs trailer supplies. 664125



- 44-5310A
by:

Bought in conjunction with other items to rewire trailer. Works as advertised. Speedy delivery. 568950



- 44-5310A
by:

connectors and breakers to hook up my brake controller arrived in order, installed easily, and lasted 1 year so far... 483587



- 44-5310A
by:

Replaced trailer wiring over a year ago and lights still work great. No issues with these connectors. Used them in new junction box. 459228



- 44-5310A
by:

Good connector. Used it to terminate LED lighting and no problems in about a year so far. 455179



- 44-5310A
by:

Have not installed yet, but I received exactly what I ordered 449433



- 44-5310A
by:

Overall a good product. Easy to use and install. The only minor issue we had was the plastic band coming loose after crimping the wire onto the connector. 442809



- 44-5310A
by:

Fast shipping and great product 435049



- 44-5310A
by:

Everything arrived faster than I thought it would and everything looks great!!! I will be buying more when I need trailer parts in future. Things should go alright installing unless I screw it up. 427531



- 44-5310A
by:

Worked great good quality 409334



- 44-5310A
by:

Exactly what I ordered 383077



- 44-5310A
by:

What can I say, its a ring terminal. 246348



- 44-5310A
by:

Received on time and as advertised. Great job!! 230245



- 44-5310A
by:

great item 210363



- 44-5310A
by:

Worked like it should 178168



- 44-5310A
by:

work great 79717



- 44-5310A
by:

Did exactly what I expected 77253


20
20

Ask the Experts about this Fastenal Accessories and Parts

  • Wiring a Side Marker Light to the Running Light Wire on a Trailer
    You can run a jumper wire to T-off from the main running light wire to the side marker light using something like a quick splice connector, # 562. Or you can use a butt connector, # 05732-2. In one end, place the wire from the trailer connector and in the other end insert the wire from the side marker light and the wire to the tail light. You would need to cut the brown wire at some point to wire it in this manner. And yet another option is to run the side marker wire all the way...
    view full answer...
  • New Side Marker trailer Lights are Very Dim
    It sounds like a bad ground connection. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light. But can also appear when changing out lights. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds...
    view full answer...
  • Troubleshooting No 12V Power at Factory-Installed 7-Way on 2017 Toyota Sequoia
    Since your 7-way trailer connector on your 2017 Toyota Sequoia was factory-installed, all needed fuses, circuit breakers or wiring connections should have been completed either at the factory or at least by the dealership. The 12V auxiliary power feed on the 7-way will be fuse- or breaker-protected (usually a 40-amp). You might just double-check the fuses since the label or marking on the 12V feed could say different things. You are correct that the ignition key usually controls the 12V...
    view full answer...
  • LED Tailgate Light Bar Only Works Without Taillights On
    I am sorry to hear about the issue you are having with your light bar. The problem you described sounds like a ground issue. If you have a light bar that plugs directly into a 4-way then I would remove the ground from the 4-way and then attach it directly to a bare metal surface on the vehicle with a ring terminal part # 44-5310A and self-tapping screw part # 101131802. The majority of issues like what you described are caused by a bad ground as the circuit cannot handle the extra load...
    view full answer...
  • How Many Ring Terminals Are Included with Fastenal # 44-5310A
    Yes, the listed price for the Fastenal # 44-5310A is for 1 ring terminal. This is designed for use with 12-10 gauge wire and features a 3/16 inch stud. I have attached a short video review that you can check out as well.
    view full answer...
  • Adding Electric Brakes to Northern Tool UltraTow 5x8 Aluminum Frame Trailer
    Because the trailer doesn't have a traditional size, in order to upgrade to trailer brakes you will need to have a welder install the Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34 which will require the proper jig to ensure placement and alignment. Then you will need to measure your spindles to help get the correct replacement hubs to add the integrated drum. I've attached a photo of the locations to measure with a digital caliper like # PTW80157 to assist in getting...
    view full answer...
  • Recommended Trailer Wiring for Solar and Vehicle Charged Trailer Batteries with Inverter
    I can absolutely help you with this trailer. First, I recommend using the Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long # 277-000141 along with ring terminals # 44-5310A. This will easily allow you to convert your 4-way wiring and also add your trailer brakes using # 10-1-1. Then you can use the 10 inch # AKEBRK-35-SA for the 4 hole mounting flange or 12 inch # AKEBRK-7-SA brake assemblies for the 5 bolt mounting flange. For your charging your trailer batteries from...
    view full answer...
  • Recommended 7,000 lb Axle with Brakes for M105 Military Trailer
    To replace the axles on your M105 Trailer, you will need to know what dimension is the better fit. We have 7,000 lbs axle with electric brakes and drum assemblies that are 95 inches from hub face to hub face with 80 inch on center spring seats or 94 inch with 79 inch centers. We also have straight no drop or 4 inch drop axles. Here are your options: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" # 8327834-EB Dexter Trailer Axle w/ Electric Brakes...
    view full answer...
  • Wiring the Traditional Trailer 7-Way to 7-Way RV Standard
    The Mighty Cord 7-Way RV-Style Trailer Connector, # A10-7W8, will have the same wiring configuration as the Hopkins 7-Way Molded Trailer Wire Connector, # H20046. I recommend the Epicord 7-Way Molded Trailer Plug with Junction Box , # 277-000141. The junction box will allow to easily connect your trailer wiring to the new 7-way cord. Using 7 of the Ring Terminal - 12-10 Gauge Wire, # 44-5310A, you can connect your trailer wiring to the junction box. The box can attach to the trailer...
    view full answer...
  • Using 7-Way 12V Power Circuit to Power Trailer LED Interior Lights
    Yes, you certainly can use the 12V auxiliary power circuit on your 7-way wiring setup to power trailer lights. If you refer to the linked photo of a vehicle 7-way connector you will note that the 12V power circuit is carried on the contact at the 1:00 position as you look at the 7-way socket. This is noted by the yellow arrow. An easy way to access this 12V power circuit is to tap into it by using a junction box like # 277-000141. This box gives you a handy place to install a ring...
    view full answer...
  • How to Complete Electric Brake Wiring to Trailer Connector
    It sounds like you have a junction box like part # 3375601101 installed on your trailer and the brake output wire from the assemblies are ran to this but not to the trailer connector. If that is the case than all you will need is a ring terminal like part # 44-5310A and some spare wire like part # 10-1-1 to finish running the brake output wire from the junction box to the trailer connector. It sound like you may also need a new trailer connector as well and for that I recommend the...
    view full answer...
  • Rewiring Boat Trailer for 7-Way to Use LED Lights
    There are a number of things you will need if you want to re-wire your boat trailer to use LED lights and you should start with the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141. Keep in mind you will also need Ring Terminals # 44-5310A and Loom Clamps # A0500 The box is color coded like this: - White (ground): 10 gauge - Black (12V power): 10 gauge - Yellow (reverse/auxiliary): 14 gauge - Red (left turn and stop): 14 gauge - Green (tail and running lights):...
    view full answer...
  • 7-Way Trailer Wiring Configuration
    If either your vehicle or trailer 7-way wiring does not have all wires connected to activate all of the 6 possible circuits you can make that last connection to activate it. On the trailer side it is really easy to install a new full-functioning 7-way plug by adding a junction box like Epicord # 277-000141. This junction box includes a pre-wired 7-way trailer plug, like the one shown in the linked photo which is wired to the RV standard. By installing this box on the trailer you...
    view full answer...
  • Do I Need an Isolating Solenoid to Wire Aux Battery on My Trailer
    There are a few different ways you can wire a 12v battery to power your interior lights and maintain your breakaway battery on your trailer. You can find the 12v circuit on your trailer's 7 way connector, it's usually a black wire at the 11:00 o'clock position (if you are looking at the face of the plug). Connect that wire to the positive post of the new aux battery, and ground the negative post to the frame. Then you can connect to the aux's positive post to the positive post on the...
    view full answer...
  • Recommendation for Adding Electric Trailer Brakes to Trailer with 3,500 lb Axles & 5 on 5 Inch Hubs
    For your 3500 lb axles, I recommend starting with the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. These assemblies will self-adjust to ensure you have the best braking without needing to manually adjust them every few months. Then for your 5 on 5 inch hubs, I recommend the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 # AKHD-550-35-K. If you have the spindles with the integrated grease zerk, then you will...
    view full answer...
  • Available 10-Foot Trailer-Side 7-Way Plug
    We do have molded trailer-side 7-way plugs in several lengths. For a 10-foot you can use part # 50-67-005. If you prefer a 10-foot that includes a junction box for connecting your trailer wiring you can instead use part # 277-000141. If you need ring terminals you can use # 44-5310A.
    view full answer...
  • Current Capacity of Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly HM55115
    The Hopkins 12-Volt Power Socket # HM55115 uses a wire gauge that can safely support up to 20-amps and that is the value of fuse supplied with this kit. I can't recommend using a 30-amp fuse in this item. What I can suggest is making your own 30-amp capable outlet by using a 30-amp auto reset circuit breaker # PK54530, 12V power outlet part # DG6112VP and 10-gauge duplex wire # 10-2-1. You'll also need some ring terminal connectors like # 44-5310A, push-on connectors like # DW05709-1...
    view full answer...
  • Adding a Battery to a Trailer with a 4-Way Connector
    To run a charge line to your battery you will first need to install a 7-Way on your trailer. This can be done using the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141. The Black wire in the junction box is the one that will carry the 12V power. Just simply use a ring terminal like part # 44-5310A and run 10 Gauge Wire # 10-1-1 to the positive terminal on your battery. The 4 wires that are currently on your trailer and tow vehicle are only for the lights and are not...
    view full answer...
  • Items Needed to Re-Wire 1970s Vintage Scamp Travel Trailer
    The 1970s Scamps are really cute vintage trailers and we can certainly help you with your re-wiring project. We have all wiring parts you'll ever need plus a wide range of trailer lights if you need light fixtures too. Our main page for trailer wiring items is linked and this includes many product categories you can just click on. New wiring is most easily installed using a junction box like # 38656, or like # 277-000141 which includes a pre-wired 7-way plug. All brake and light wiring...
    view full answer...
  • Recommend Trailer Wiring Connectors To Test Functions Of 7-Way
    It sounds like you are looking for the LED testers integrated into your wiring. If you want the trailer side 7-way with LED, I recommend the Hopkins 7-Way RV Style Trailer Connector w/ LED Test Lights - Trailer End # HM48503. This will let you know if power is being received from the tow vehicle for each function to make testing and troubleshooting easy. This is already integrated in the Hopkins 7-Way RV Style Connector w/ Molded Cable and LED Test Lights - Trailer End - 8' Long # HM20087....
    view full answer...
  • How to Power Enclosed Trailer Lights Off of 12V Battery
    I can tell you exactly what you'll need to power your enclosed trailer's lights off of an independent 12V battery, though there isn't an adapter. You first need to mount the battery with a battery box for 12V batteries like # TLA7708R, and then use junction box # 38656 to tap into your trailer's 7-way. You will also need ring terminals # 44-5310A, and wire # 12-1-1 to run to each light, and to turn the lights on, a light switch such as the Pollak rocker switch # PK34308 or toggle...
    view full answer...
  • What is Needed to Tow a M105A2 Military Trailer with a 2013 Dodge Durango
    To convert your M105A2 military trailer to a 7-blade, I would recommend using the Epicord 7-Way with Junction Box # 277-000141. This makes the conversion simple and you don't have to worry about wiring the connector itself. You'll also need some ring terminals like # 44-5310A and some loom clamps like # A0500. The wires in the junction box are color coded as indicated below. Military wiring is typically not color-coded, so you may need to use a circuit tester like # 40376 and a 12V power...
    view full answer...
  • Installing Electric Trailer Brakes To Replace Hydraulic Brakes
    To convert your hydraulic brakes to electric, you will start with the hub/drum diameter. Your brakes will either be 7 inch or 10 inch for that capacity. You can reuse your hubs if they are in good shape just use some brake cleaner to make sure they are really clean before installing your new brake assemblies. For 10 x 2-1/4 inch hubs, I recommend the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35 or the self-adjusting # AKEBRK-35-SA. If...
    view full answer...
  • Electric Brake Conversion from Air Brakes on 15,000 lb Axle Trailer
    The Dexter Electric Brake Kit w/ Cast Backing - Self-Adjusting - 12-1/4" - Left/Right Hand - 15K # 23-446-447 will fit any 15K axle that have the standard 7 bolt mounting flange. These are self-adjusting brakes so there is no need for manual adjustments after the initial installation. They are labeled left-hand (driver's side) and right-hand (passenger's side) to ensure proper placement. If you need the mounting hardware, I recommend # BRKH122510 for each axle. You will also need...
    view full answer...
  • Parts Needed to Rewire Trailer with 7-Way and New Wiring
    We offer handy junction box kits like # ET7WK that let you install a new 7-way plug and make the connections for each circuit on the trailer. You will need ring terminals like # 44-5310A to make the connections in the junction box; use butt connectors like # DW05745-10 to splice in any new brake wiring like part # 10-2-1. This is double bonded 10 gauge wire that you can use for power and ground for the brake assemblies. Or if you planned on grounding the assemblies to the trailer frame...
    view full answer...
  • Parts Needed to Add Electric Brakes to Trailer and Tow With 2010 Toyota Tacoma
    We have all the parts you need to install and use electric brakes on your 1999 Jayco and tow it with your 2010 Toyota Tacoma; since you already have a 4-flat and have the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 and Wiring Adapter # 3040-P you won't need anything else for your truck. As for the size of your brakes, there are numerous models of a1999 Jayco Heritage Manistee so I was unable to confirm the exact size you need so you will need to measure the diameter and depth...
    view full answer...
  • Should Stromberg Carlson Electric Trailer Jack JET-5000 Have Circuit Breaker on Power Wire
    You can use either a fuse or an auto-reset circuit breaker on the power circuit for the Stromberg Carlson Electric Trailer Jack # JET-5000. Since this unit draws 30-amps with a 1,700-lb load a 30-amp breaker like # PK54530 will allow all needed power to reach the jack. You'll use ring terminals # 44-5310A, 10-gauge duplex wire # 10-2-1 and butt connectors # 05732-2. The copper color post on the breaker goes to the battery.
    view full answer...
  • Recommended Brake Assemblies for 1995 Coleman Fleetwood Utah Pop-up Camper
    If your drums are 7 inches, then you will want the Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2. Many people upgraded those trailers and added a 3500 lb axle, so if you have 10 inch hubs, you will want # AKEBRK-35-SA instead. If you need wiring, I recommend # 10-2-1 for your brake wiring and then the Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long # 277-000141 for easy and clean connections. The ring terminals # 44-5310A make...
    view full answer...
  • Routing Electric Brake Assembly Wires For Best Connection and Function
    Depending on the size of your trailer, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA or the # AKEBRK-35-SA for 3,500-4,200 lb axles. These assemblies will install with # 10-1-1 wiring run from the electric brake output wire of your trailer connector to one side of your brake magnets and then the other wire of your brake magnet gets wired to ground on the axle or the trailer frame. This wiring does not...
    view full answer...
  • Recommendations for 7-Way Wiring Replacement on Gooseneck Trailer
    I've attached an article to help you with the wiring functions and common colors as well as pin placement. I've also attached some videos to assist with installation. For a long term solution, I recommend the Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long # 277-000141 and # 44-5310A ring terminals. This will make connections and trouble shooting easy as well as gives you the weather protection of having a wiring box versus heat shrink butt connectors. If you prefer...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Expert Research:
Michael H
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.