View Cart
Wood Screw - 8 x 3/4" Slotted Round Head

Wood Screw - 8 x 3/4" Slotted Round Head

Item # 30587

lowest price pledge

Our Price: $0.15

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.02 lbs

Quantity: 
In Stock, Ships Today
30587 - Wood Screw Fastenal Accessories and Parts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Tie Down Anchors
  • Screws
  • Wood Screw
  • Fastenal
  • 3/4 Inch Long
These slotted, round-head wood screws are designed to work on wood or similar materials. Sharp points at the tip help you to get them started. Call 800-298-8924 to order Fastenal accessories and parts part number 30587 or order online at etrailer.com. Free expert support on all Fastenal products. Guaranteed Lowest Price and Fastest Shipping for Wood Screw - 8 x 3/4" Slotted Round Head. Accessories and Parts reviews from real customers.


  • All Info
  • Q & A (15)
  • Photos
  • Why etrailer?

Fastenal Accessories and Parts - 30587

These slotted, round-head wood screws are designed to work on wood or similar materials. Sharp points at the tip help you to get them started.


Features:

  • For wood or similar material
  • Round head sits flush with surface
  • Standard slot for screwdriver
  • Sharp point eases starting
  • Size: #8 x 3/4"


Note: Drill a starter hole slightly smaller than the diameter of the screw to avoid splitting material.



30587 Fastenal #8 x 3/4" Slotted Round Head Wood Screw





0
0

Ask the Experts about this Fastenal Accessories and Parts
Do you have a question about this Accessories and Part?


  • Can Redline 2-Way Pop-Up Vent # 9106-2756 Be Installed on Trailer Wall Instead of Roof
  • There is no reason why you could not install the # 9106-2756 on the side of the trailer. Screws needed to install the vent are not included. We have the appropriate wood (# 30587) or sheet metal (# 31071) screws available. Using a silicone sealant like part # 0160297 is recommended to prevent water intrusion.
    view full answer...

  • Installation Hardware for Trailer Vent HMAV2-AVT2
  • To install the 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2 you will need 9 screws, either the Zinc Sheet Metal Screw # 31071 or Wood Screw # 30587 as well as Sealant # L0150811. I've added links to video reviews of these products for you to take a look at as well.
    view full answer...

  • Recommended Orientation/Installation for Redline 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2
  • The Redline 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2 should be installed so that the openings on the flat bottom portion of the external section face down. In any other orientation there will be potential for rain to enter. Installation also requires that you apply a sealer of some kind to the two parts' mounting flanges. You can use a silicone caulk or a urethane sealant like Loctite Urethane Sealant # L0150811. Please refer to the linked photo for illustration. We also offer...
    view full answer...

  • Should a Sealant Be Used When Installing Alliance 2-Piece Enclosed Trailer Vent # HMAV2-AVT2
  • When installing a vent like the Alliance 2-Piece Enclosed Trailer Vent, part # HMAV2-AVT2, to a trailer we do recommend to use a sealant like the Loctite Urethane Sealant, part # L0150811, to help seal the trailer from the elements. The Loctite urethane sealant is applied as a thick liquid to parts before assembly or in seams after assembly to create a waterproof bond in a variety of applications. It can seal doors, windows, vents and other areas in enclosed trailers where water could...
    view full answer...

  • Where to Install Redline 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2
  • The Redline 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2 can be installed in any convenient location on your enclosed trailer where you have or can make a 3-inch diameter hole. These vents will work best when used in multiples, with some near the ceiling and some near the floor, to allow cooler air to enter through the lower vents and hotter air to exit through the upper vents. I recommend you use a sealant for installation, such as silicone caulk or Loctite Urethane Sealant # L0150811....
    view full answer...

  • Replacement Lid And Operator Kit Recommendation For Ventline Ventadome Roof Vent
  • If the vent you have installed on your trailer has a 4-point hinge like the attached photo, part # BVD0449-A01 would be the replacement lid for your Ventline roof vent. We do not offer a metal replacement lid with a 4-point hinge. The replacement knob and operator you asked about for your fan is part # BVD0462-00. If you want to replace the vent with one that has a metal lid I recommend part # V2110SP-24. This will fit in a rough opening that measures 14-1/4 inches wide x 14-1/4...
    view full answer...

  • Function Of Trailer Vents On Enclosed Trailer
  • The vents we offer for an enclosed trailer like part # 9139 are designed to allow air into the trailer. None of the vents we offer create a pressurized condition in the trailer and none are equipped with an air filtration system to keep dust out. Some of the features on the vents like # 9139 allow you to adjust the amount of airflow in the trailer with a butterfly valve mounted on the inside of the vent which would be operated from inside the trailer. Other trailer vents, like part...
    view full answer...

  • How to Install the 7-1/2 Inch Round Butterfly Vent # 371800 on an Enclosed Trailer
  • To install the 7-1/2 Inch Round Butterfly Vent, # 371800, you will need to drill or cut a hole in your trailer that is 5-7/8 inches diameter to no more than 6 inches diameter. If you have access to a hole saw this size for a drill the wold be the cleanest way to cut the hole. A smaller hole could be used, but the butterfly may rub on the trailer sides if a smaller hole is used. The mounting holes on this vent are 4-9/16 inches on center and the distance between the inside of any two...
    view full answer...

  • Recommended Wall Vent for Enclosed Trailer with Gas Water Heater
  • I recommend our Redline 2-Piece Polypropylene Trailer Vent # WHMAV2-WAVT2. This wall vent will work on a trailer wall up to 2 inches thick and can be installed in any convenient location on your enclosed trailer where you have or can make a 3-inch diameter hole. This wall vent is designed to provide a constant flow of air, and is louvered on one side so you can adjust it when installing for the best airflow and to help prevent water from getting in. You can use a sealant for installation,...
    view full answer...

  • Is the Butterfly Vent Waterproof and Will it Stay Closed or Open
  • This Butterfly Vent # 371800 that you referenced is not waterproof. If the vent was on the side of the trailer it would not get direct water sprayed at it when it is raining so it should not let too much moisture through. If you left the vent in either the open or closed position it would move. The amount of friction in the vent assembly would prevent it from moving just from the vibrations of the trailer rolling down the road. With that being said, it is not difficult by any means to...
    view full answer...

  • Recommended Manual Vents For 2001 ShadowMaster Enclosed Trailer
  • For your two roof vents on your 2001 ShadowMaster enclosed trailer, I recommend the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28. I've attached a video of this installation to help you. I recommend using Loctite Urethane Sealant - 10.2-Fl Oz Cartridge - Gray # L0150811 which can handle temperature changes and can be painted after 72 hours if desired. You will also want sheet metal screws like # 31071 and wood screws like # 30587. These parts...
    view full answer...

  • Is Inside Trim Included With Redline 2-Way Pop-Up Roof Vent
  • The interior trim garnish is indeed included with the Redline 2-Way Pop-Up Roof Vent, part # RV-626-062-2756. This vent also includes a gasket to help seal the vent and prevent leaks. For installing the vent we also offer either sheet metal screws, part # 31071, or wood screws, part # 30587. If you wish to use a silicone caulk to seal the vent and keep out moisture I recommend part # 0160297.
    view full answer...

  • Installing 2-Piece Vent On Cargo Craft Enclosed Trailer
  • Using the Great Stuff sealer you mentioned is a great idea to insulate and fill all the voids between the wall and outer aluminum siding on your trailer when you plan on installing the Polypropylene Trailer Vent, part # HMAV2-AVT2. A word of caution when using this sealer is that it expands a great deal, and if it has nowhere to expand will cause issues by pushing the walls apart. A little goes a long way with this stuff. Please make sure you read the label before using this sealer....
    view full answer...

  • Installation Recommendation for Pop-Up Roof Vent for Enclosed Trailers
  • The Redline 2-Way Pop-Up Roof Vent with Garnish for Enclosed Trailers - Steel # 9106-2756 is a lightweight vent that many will just attach to the outside skin. Based on the fact you have a finished interior and have space between the outside skin, I recommend using the wooden support to give you the extra strength to ensure it will hold up well over time. I recommend using the TremPro 644 Silicone Sealant - 10.1-Fl-Oz Cartridge - White # 0160297 along with the Zinc Sheet Metal Screw -...
    view full answer...

  • Can Polypropylene Trailer Vent Be Adjusted to Fit Thick Trailer Walls
  • The 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2 that you referenced will work on a trailer wall up to 2 inches thick. There is no spacer designed to fit with the vent. You can use a sealant like the Loctite Urethane Sealant, part # L0150811, to help seal the trailer from the elements. The Loctite urethane sealant is applied as a thick liquid to parts before assembly or in seams after assembly to create a waterproof bond in a variety of applications. It can seal doors, windows, vents...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Written by:
Raymond P
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924