Replaces the lift arm for your Fan-Tastic Vent roof vent.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the replacement lift arm for Fantastic Vent Roof Vents. And this is just going to replace the lift arm for your Fantastic Roof Vent. And basically this component, just as the name suggests, lifts that vent up or down. So as that little catch on the bottom turns, it lowers the vent, and then raises it back up.
Does come pre-lubed, so there's some grease inside there to help that move smoothly, and also help prevent any kind of rusting and corrosion inside those gears.We do have the mounting hardware to get this installed onto our vent. So it's a pretty easy way to replace that one component if everything else is working properly. And I will say, if you have any other issues with your roof vent, like the cover is cracked or maybe the motor's bad, or something else as an issue, it might be a good idea to just invest in a whole new system. But if everything is working properly, and it's just the lift arm that got damaged somewhere along the way, this is going to get you back out on the road and operating that fan or that roof vent easily. I'm going to give you some measurements just for reference to make sure that this is going to be the right one for you.So the distance between those mounting holes, center to center is about three inches, right on.
And then the distance for that lift arm itself from that little pivot point on the end, to where it attaches in, and that pivot point at the bottom, it's about six and a quarter inches long. So that might give you an idea if this is going to be the right one for you. The depth of this component here is going to be about an inch and three quarters. Or an inch and three quarters from there to there. That's going to do it for our look at the replacement lift arm for the Fantastic Vent Roof Vent..
Average Customer Rating: 4.9 out of 5 stars (100 Customer Reviews)
Replaces the lift arm for your Fan-Tastic Vent roof vent.Exact replacement, easier install than we anticipated. In, done, and working perfectly. 509348
Item arrived quickly. The shank was a little too long so my husband had to modify the slot to make the shank fit. Seems to be working great. 594250
the item that purchased for my for my fan fit perfect thank for the right light arm. 517777
Exact replacement 936747
Fast delivery, just what I needed, would buy again 936262
As described. Had to modify it for my use, which I expected. 933612
They sales rep was very helpful and knowledgeable. The product arrived quickly and was of good quality. I was surprised to even be able to get such a random part. Thanks guys 923261
Just what I ordered. Works great and easy to install. 922506
The lift arm fit perfectly. I would recommend this company to anyone who owns a camp trailer or RV. They have a wide variety of items that are very difficult to find in store. 917459
This part was an exact replacement for the 2000DMBT-200 Fantastic Fan in my 2000 Monaco Dynasty. 915614
Ordered on a Sunday, delivered Wednesday! I paid for rush shipping but etrailer sent an email that they were able to process the order earlier. Very pleased with the service. 908323
Kimberly was patient and very helpful with this old guy. Found the correct part after some confusion. Always had good results using etrailer. 907421
Ordered my part, it came right and I received it promptly. 907271
I have replaced this fan 3 times . It is a terrible design. The lock does not hold it down . It continues to break when you drive down the road the wind lifts it because the lock is too flimsy . I have to hold it down with duck tape . 901033
Seems Etrailer had two type of these lift arms, one had the roller on end of arm on one side, the other one had the roller on the other side. I just ordered the one had the roller on the same side as mine did. Turned out to be 3/8" shorter than mine was, but I installed it and it worked fine even though it was a little shorter. 900807
Great price and service ! 899986
899744
Have always received quick service and helpful info from etrailer. Thank you 898378
The replacement lift arm bolted right in place without issue. These are an upgrade of my original lift arm as the input shaft extends out slightly more than the original making a better/deeper fit into the drive coupling on the motor. The shipping time was acceptable. Customer service was excellent. 896340
Exactly what I needed. Was quick and easy to find like all of the other purchases from etrailer. Good price with quick shipping 895368
Fast delivery so easy to install granny could have Done it even after a few 894635
excellent replacement products, super quick shipping. Our new "go to" site for Camper replacement parts! 892656
Hi. I bought both the motor and the lift arm, because I was not sure which was not working. I replaced the motor first in about 10 minutes. Very easy to do. The fan works GREAT again. Thank you. Delivery was was reasonable in cost and time, as it was shipped to Canada. 894106
Exact replacement for old part in 2013 Jayco Pinnacle. It took about 30 minutes to replace the old motor and lift arm, due to stripping of the meshed gears connecting motor and lift arm. Works like new ... Thank you eTrailer 887428
Excelent 876151
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.