bing tracking image
  1. Accessories and Parts
  2. Dutton-Lainson
  3. Trailer Winch
  4. Hand Winch
  5. Cables and Straps
  6. Wire Rope
Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs

Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs

lowest price pledge
Our Price: $53.08
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
DL24104 - 50 Feet Long Dutton-Lainson Trailer Winch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
Hand winch cable with safety hook. 1-800-496-5010 to order Dutton-Lainson accessories and parts part number DL24104 or order online at Free expert support on all Dutton-Lainson products. Guaranteed Lowest Price and Fastest Shipping for Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (24)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Dutton-Lainson Accessories and Parts

  • Trailer Winch
  • Hand Winch
  • Cables and Straps
  • Wire Rope
  • Dutton-Lainson
  • 1/4 Inch Diameter
  • 50 Feet Long
  • 3500 lbs

Hand winch cable with safety hook.


  • 1/4" Diameter x 50' long cable with safety hook
  • 7 x 9 Galvanized aircraft cable
  • Suitable for use on D-L hand winches up to 3,500 lb capacity
  • Electric winch models SA9000 and SA12000

24104 Winch Cable and Hook 1/4" x 50' by Dutton-Lainson Model 6524

Item # DL24104

Video of Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Dutton-Lainson Trailer Winch DL24104 Review

Today we're going to be taking a look at part number DL24104. This is the Dutton-Lainson hand-winch cable with a safety hook. The cable itself is going to give us a 1/4" diameter. It's going to measure 50 feet long. It's going to have the forged steel hook on this end with the safety latch mechanism that is spring loaded. It's going to prevent accidental disconnecting or unhooking. This is a flexible 7 x 9 galvanized aircraft cable.

It is going to be suitable on Dutton-Lainson Hand Winches, up to a 3,500 pound capacity. It will work for StrongArm electric winches up to 3,000 pounds. It's going to have the safe working load limit for other applications of 1,400 pounds. Nice construction, very strong, and very durable. You can see here where the steel hook swivels around the cable.

Dutton-Lainson puts a nice steel plate in there. That's just going to prevent the cable from wearing or fraying. It's going to extend the life of the cable itself. Here on this end, you have the exposed cable end. This is going to be the end that gets anchored to the winch.

That's going to do it for our review of part number DL24104. This is the Dutton-Lainson hand winch cable with a safety hook. Again, you're going to have 50 feet in length. The cable diameter is 1/4". .

Customer Reviews

Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs - DL24104

Average Customer Rating:  4.8 out of 5 stars   (24 Customer Reviews)

Hand winch cable with safety hook.


I love it George - very well made - I sprayed the cable I got with it - with lithium grease and after being outdoors for most of the year on my trailer it looks like new still! The worm gear set up with my high speed Milwaukee Fuel hammer drill (great torque - pro drill) works great.I use it to haul a small drift boat up and down steep inclines (drift boat for rivers - fishing) and it works well. I also added corrosion X grease to all of the winch's moving parts - New England weather is a good test for it.


I installed this on my Dutton-Lainson Hand Winch P/N DL11001. Both are in my 20 foot enclosed trailer in case I have to pull in a vehicle that won't run. The winch cable worked perfectly when I pulled my 3000lb tractor into the trailer as a test. I am pleased with this purchase. Jameson assisted me in picking out this product.


This winch has a lot of power, very smooth operation. It works great with my 1/2in battery powered drill. cable always winds perfect and tangle free. I use it to pull my 16ft jon boat out of the water on a makeshift ramp. the boat and motor is around 1000 lbs. its a very high quality winch and its made in the USA.


Hand winch is strong, larger than expected, and built pretty heavy duty. One thing to note, the pawl (clicker) is only one sided, so it won't hold the load when letting cable out. It would be nice if it had an extra little tab to allow cranking in, cranking out, and neutral (line pull out) positions.

Also, I'm new to winches, but kind of wish it had a clutch on the cable to keep tension on the cable spool. When nothing is on the line, the tension on the spool unravels, causing the cable go all over the place, the first time i used it, I slightly pinched the cable (I had half the line payed out, and the slack on that part got bunched up when I started pulling in)

I went with a cable instead of strap so that I could use a snatch block pulley if i ever needed extra power, and also ordered a cable twice as long as what I needed to allow for looping back (using it on a utility/car trailer)

Looking back I should have went with the shorter cable so that the line would be all the way out when starting to winch. I might cut down the cable to a shorter length and eventually replace it with a strap. Another drawback i found with the cable is that it tends to wander all over the drum back over itself if you aren't careful causing a tangled mess, but I guess that happens on the power winches too.

Another accessory I wish they had was a heavy waterproof drawstring bag to slip over the winch when not in use. I made a removable pedestal using 2" receiver tube, so I plan to keep the winch indoors. but I really should grease up the cable and it would be nice to have a cover. (Might try to make a bag or have one made)

Overall I'm satisfied and the winch itself more than met my expectations. I was able to easily pull a 2003 Grand cherokee up the ramps onto my trailer with one hand and single line.


Everything arrived in nice big box, packed well. Looks like perfect replacement parts. Fast ship time.

So far the cables are fine and I had enough to fit both winches for our application.
Bishop s - 02/26/2018


eTrailer is awesome. I ordered this product to place a Superwinch Terra cable and rolled on no problem.


Was not easy to install properly - but now does the job.
When the trailer is parked outside cover it up so its not getting rained on - that will extent the life of that cable...


Excellent. I probably could have used a much smaller cable, but it should handle any load I might have in the future.


As advertised


The product was exactly what I ordered, but the service was really great and the staff was very friendly and knowledgeable. My purchase arrived a couple days early and the invoice arrived on the day of purchase. I work with many many companies and yours for service is one of the best. Thanks for your help in obtaining this cable. Ken


Very nice product! I am happy!


Item as described


No problems at all.



Looks like a high quality cable and the packaging was good.



Worked nice






Good price. Fast shipment.



Cable is better than described. OEM


great aircraft cable


See what our Experts say about this Dutton-Lainson Accessories and Parts

  • Mounting Dimensions for the Dutton-Lainson Trailer Winch # DL14881
    I went out to our warehouse and measured the mounting base for the Dutton-Lainson Trailer Winch, item # DL14881. The flat part of the base measures 8-3/8 inches long by 5 inches wide. The elongated bolt hole at one end of the winch is 1-7/8 inches long and the 4 elongated holes at the other end are 1 inch long. The two round holes are 3/8 inch diameter. The distance on center between the long elongated hole and the first set of shorter elongated holes is 4-1/8 inches. The distance between...
    view full answer...
    Image 1 for
  • Does the Dutton-Lainson Worm Gear Hand Winch # DL11001 Have a Brake and Reverse Function
    The Dutton-Lainson Worm Gear Hand Winch, part # DL11001, is a single speed brake winch for use with cable. The brake function is when the cranking is stopped the reel automatically stops. It can be cranked in reverse. There is no free wheel mode, so to it will have to cranked in reverse to let out the cable. The handle has a hex drive so a 1/2 inch variable speed drill can be used to speed up the cranking process. It has a weight capacity of 2,000 lbs. The cable you will need for the hand...
    view full answer...
  • Winch Recommendation for Lifting 900 lbs 20 Feet High
    A winch that you could consider using is the Dutton-Lainson Brake Winch, # DL14964, which would allow you to lift the 900 lb load 20 feet, with the 50 foot hand winch cable, # DL24104. This winch has the advantage of less moving parts and is a bit more economical. The drawbacks to this winch are that the winch will be harder to crank and there are not two speeds to select from. If you are lifting from the floor to an elevated position you could also use a block and tackle setup. The force...
    view full answer...
  • Winch Recommendations for a Letting In and Out a Dock
    For a winch that could bring in over 20-25 feet like you said you need you could use the Dutton-Lainson Hand Winch # DL15440. You will need to also get a Hand Winch Cable # DL24104. I am not sure if you were planning on using the 5/8 inch cable you have on your dock, but in case you were you would not be able to since the cable is too thick and its not winch cable that is designed to be wound tightly.
    view full answer...
    Image 1 for
  • Is a Driver Extension Available and How Does the Cable Install on Worm Gear Winch DL10954
    We currently do not offer the extension that you could use to operate the loop drive on winch # DL10954 because there are so many possible lengths that customers could need. As for the cable attachment it is fairly easy. First, for a cable, the recommended cable is # DL24104. To attach the cable I have included some pictures that show how the cable installs.
    view full answer...
    Image 1 for
  • Recommended Tree Mounted Winch to Pull 3000 Pound Boat Up Slope on Log Rollers
    We do not offer any tree mount winches and a tree is not a recommended place to mount a standard hand winch. Normally in these situations, people mount a hand winch on a steel post held in the ground with concrete in order to support the weight. You'll need to make sure the winch pays out and reels in a straight line into the winch so it may need to be angled. When winching a boat onto a boat trailer a common ratio for determining your winch load capacity is 2 to 1. For example, a 5,000...
    view full answer...
  • Recommended Hand Winch For Pulling 300 lb Catamaran 60 Feet Across Beach
    The Dutton-Lainson Hand Winch with TUFFPLATE Finish # DL15103 would work well for you. It has plenty of capacity, keeping in mind that the capacity of the winch decreases with each layer of cable that wraps around it. This winch does have the option to freewheel, but it features a lock to keep the winch from backing off. It will also accommodate up to 79 feet of 3/16 inch cable. The cable isn't included with the winch, and the longest length we carry is part # DL24104 for 50 feet. You should...
    view full answer...
  • Winch Recommendation for Hoisting a Jeep Top to the Ceiling
    Only one style of winch would I recommend for hoisting something from the ceiling. I recommend a worm gear winch, # DL10954, that you can mount on the ceiling and use an extension pole to turn the loop drive handle. Place this winch centered above where you would lift the top so you will not have to use pulley blocks to get a straight line pull. Worm gear winches will brake automatically if you release the handle which is nice. You will also need a secondary support system to actually...
    view full answer...
  • 2 Speed Winch Recommendation with Free Wheel Option and 50 Feet of Cable
    The Dutton Lainson 2-Speed Hand Winch # DL15440 that you referenced is a 2 speed jack that if you push up on the ratchet lever it will allow it to free wheel. Check out the 2:45 mark of the video I attached to see how this is done. For 50 foot long rope to use you would want the part # DL24104 as well.
    view full answer...
  • Brake Winch Recommendation for Lifting 500 lb Load Off Ground
    You would want a Worm Gear Winch like the part # DL10954 that can be used as a hoist. Worm gear winches are really the only type of hand winch that is designed to work well with hoisting items off of the ground and suspending them. This winch has a 1,500 lb capacity so it would make easy work of your 500 lb load. For cable the part # DL24104 is 50 feet long and has more than enough capacity.
    view full answer...
  • Trailer Winch Recommendation for 2003 Bayliner 24 ft
    From the research I did on your boat it looks like it weighs 5,304 lbs but since you didn't list which model you have that may be inaccurate. From what I found the 24 foot long Bayliner made in your year was the 2455 Ciera. Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances...
    view full answer...
  • How to "Increase" Diameter of Spool on Worm Gear Winch DL10954
    What you can do is use a longer cable on the worm gear winch part # DL10954 as that will basically give you a larger spool diameter as the cable will be wrapped several times around the spool. For a 50 foot long cable we have the part # DL24104.
    view full answer...
  • Recommended 1500 lb Winch To Replace Howard H-255 Winch
    For your application, I recommend the Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle - 1,500 lbs # DL11011. This winch is worm gear driven for smoother operation and has a hex drive so you can use a drill if you so choose for even easier function. I recommend using the Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs # DL24104 with this winch.
    view full answer...
  • Dutton-Lainson Hand Winch to Replace DLB1500A
    Yes, the Dutton-Lainson Hand Winch # DL14964 is an exact replacement for model DLB1500A and with it you can use 50-foot winch cable # DL24104.
    view full answer...
  • Can Smaller Diameter But Longer Cable be Used with Dutton-Lainson Hand Winch
    Since the max cable capacity of the Dutton-Lainson Hand Winch # DL14825 is 5/16" x 47' you can definitely use the 1/4" x 50' Cable # DL24104 but you may have to cut off some of the length for it to fit properly on the winch (as it is 3' longer than the recommended size cable). Please note that the winch has a max weight rating of 2,500 lbs so even though this cable is rated for 3,500 lbs since the winch has a lower rating that is what you are limited by.
    view full answer...
  • High Capacity Hand Winch Recommendation for 10,000 lb Capacity
    The highest capacity hand winch we have is the Dutton Lainson part # DL14881 which has a capacity of 3,500 lbs. So with three of these you'd have 10,500 lbs of winch capacity. For a cable with a matching capacity we have the part # DL24104 which is 50 feet in length.
    view full answer...
  • Winch Recommendation to Use as Hoist for Lifting Sign into Air
    The only style of winch we offer that can be used to hoist something safely into the air is a worm gear winch like the Dutton-Lainson Hand Winch - Worm Gear - Loop Drive - Ceiling Mount # DL10954 that was actually designed to mount on the ceiling and hoist something into the air like you mentioned wanting to do. I attached a picture of two of these mounted on a ceiling for you to check out as well. For a cable then you'd want the part # DL24104.
    view full answer...
    Image 1 for
  • Will Dutton-Lainson Hand Winch # DL10970 Work to Hoist Fishing Kayak
    The Dutton-Lainson Hand Winch # DL10970 that you referenced is a great solution for helping to unload your 200 pound fishing kayak and suspend it in the air. The winch features a 2,000 pound weight capacity and can be used with winch cable like # DL24104. Worm gear winches like this one work really well for hoisting objects since they don't have a free wheel option and the load can't reverse the direction of the winch. I have attached a short video demonstration on this winch that you...
    view full answer...
  • Hand Winch that Can Be Powered In and Out with Power Drill
    For a trailer winch that can have a power drill attached to it so that it can be powered in or out you'd need a worm gear winch like the part # DL11001. Then for a 50 foot long winch cable the part # DL24104 would be a great option as well.
    view full answer...
  • Can Dutton Lainson Winch # DL14927 be Used On Boat Lift
    Yes, the Dutton-Lainson Heavy Duty Brake Winch # DL14927 will fit and work well on your boat lift as a winch replacement as that is a very common application for this winch. If you needed a cable to go with it you'd also want the part # DL24104 which is 50 feet.
    view full answer...
  • Hand Winch with Largest Drum Capacity for 3/8 Inch Wire Rope
    The Dutton-Lainson Hand Winch # DL15440 features the longest 3/8 inch rope capacity at 30 feet in length. This heavy-duty winch features a zinc TUFFPLATE finish to resist corrosion during marine applications and it has a 3,200 pound weight capacity. The handle is included and the unit is made right here in the USA. I have attached a short video demonstration on this winch that you can also check out.
    view full answer...
  • Hand Winch for Use Pulling Floating Boat Dock
    Most winches can use a wire rope or nylon strap of up to about 20-feet in length. In your floating dock application where there is not really going to be a lot of weight on the winch an item like the 600-lb-rated Dutton-Lainson Hand Winch # DL14125 would do the trick. With it you can use a 50-foot cable # DL24104.
    view full answer...
  • Winch Recommendation for Ceiling Hoist with Automatic Brake
    For that application you will want a worm gear winch like the Dutton Lainson Ceiling Mount part # DL10954 this is the best and safest winch we offer that you can use as a ceiling hoist that automatically applies a "brake" when you stop cranking the winch. I attached a review video for this for you to check out as well. For a cable then you'd want the part # DL24104.
    view full answer...
  • Hand Winch Recommendation with Free Wheel and Longer Steel Cable
    The Dutton Lainson 2-Speed Hand Winch # DL15440 that you referenced is a 2 speed jack that if you push up on the ratchet lever it will allow it to free wheel. Check out the 2:45 mark of the video I attached to see how this is done. This also has a 3,200 lb capacity as well. For 50 foot long rope to use you would want the part # DL24104 as well.
    view full answer...

< Previous
123. . .4

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Wilson B
Updated by:
Wilson B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-496-5010