Center Section for Fold-Down Gooseneck Trailer Hitch

See what our Experts say about this Draw-Tite Accessories and Parts

• Is Template # 6425 Included with the Fold Down Gooseneck Hitch Part # 8339
  All installation hardware is included, but the template is not, and would need to be ordered separately. The template is part # 6425.
  view full answer...
• Does Gooseneck Trailer Hitch and Install Kit # 8339-4438 Have Everything Needed for Installation
  The Fold-Down Gooseneck Trailer Hitch with Installation Kit, # 8339-4438, comes with the hitch, the installation kit, and the hardware needed to install it in the following trucks. 2003 - 2005 Dodge Ram Pickup 6 Foot Bed, 1500 Series 2006 - 2008 Dodge Ram Pickup 6 Foot Bed, 1500 Series, except Mega Cab 2003 - 2008 Dodge Ram Pickup 8 Foot Bed, 1500 Series I have included a link to the installation details for you to review. Basically, you would install the rails first. The rails in this...
  view full answer...
• Freeing Stuck Gooseneck Ball
  It's really difficult to say without knowing the manufacturer and model of the hitch. Generally speaking, most of the time you can clear a stuck ball using spray lubricant, heat and shock. Sometimes all three. The brand/model of the hitch will dictate where you apply the 3 methods described above. If the hitch uses a pin to release it like the B&W # BWGNRK1059, the actuating handle will typically be located in the driver's side wheel well. Give the handle a pull and twist, and you should...
  view full answer...
• Recommended Center Section With a Fold Down Ball for a Draw-Tite Gooseneck Rail Kit
  The enter Section for Curt Folding Gooseneck Trailer Hitch # C-52 you're referring too is only going to work with the Curt folding Gooseneck trailer hitch, so not your Draw-Tite # 4435. Instead, you'd want the Center Section for Fold-Down Gooseneck Trailer Hitch # 8339 which folds down when not in use like # C-52, has a GTW of 25,000 lbs, and has integrated spring loaded safety chain loops.
  view full answer...
• Recommended Rail Kit for Older Draw-Tite Gooseneck Hitch # 8339 On 1994 Dodge Ram 2500
  I spoke with my contact at Draw-Tite regarding the # 8339 Gooseneck Hitch that you recently obtained. He did state that the older version of this model hitch featured the 6 square mounting holes that you are seeing on your system. The current model dropped these two holes and has just the 4 square holes at the corners of the plate, as you referenced. He stated that for this gooseneck hitch and your 1994 Dodge Ram Pickup, you will just need the Installation Rail Kit # 4439. This kit will...
  view full answer...
• Installation Kit to Install Folding Gooseneck Trailer Hitch 8339 on a 2011 Ram
  If you have a 2011 Ram 1500 series 6 or 8 foot bed and it is not a crew cab then to install the folding gooseneck hitch # 8339 you will need installation kit # 4446. If you have a 2500 or 3500 series 6 or 8 foot bed then you would need installation kit # 4435.
  view full answer...
• Insatallation Rail Kit for Fold-Down Gooseneck Hitch on 2000 Chevy C/K Series
  The Draw-Tite # 4456 gooseneck rail kit works with 2011-2019 Chevy Silverado/GMC Sierra 2500/3500 models only. For a 2000 Chevy C/K series (not the Silverado, 2000 was a split model year), you'd need the # 4440 rail kit which is compatible with the Draw-Tite # 8339 Fold-Down Gooseneck Hitch.
  view full answer...
• Gooseneck Hitch Fit Recommendation for 1990 Dodge Ram 3500
  For your 1990 Dodge Ram 3500 we only have one gooseneck hitch fit available. For that you'd want the B and W Gooseneck hitch part # BWGNRK1300 which is a confirmed fit. The Draw Tite you mentioned is not a fit so it would not fit.
  view full answer...
• 2008 Ford F250 Super Duty 4 Door Pickup Gooseneck Installation Kit
  We do have a Fold-Down Gooseneck Trailer Hitch with Installation Kit - Ford Super Duty Trucks, item # 8339-4449, that will fit your pickup with 6-1/2 foot or 8 foot bed. The installation of this gooseneck hitch is straight forward and instructions (see link) are very good for these hitches. .
  view full answer...
• Compatibility with Curt Gooseneck Hitch WIth Reese Installation Rail Kit on 2000 Ram 2500
  The Gooseneck Trailer Hitch Installation Rail Kit - Dodge Ram Trucks # 4439 is not a fit for the Curt Hitch 61052 Folding Ball Gooseneck Hitch # C-52. Instead you will want to use the Fold-Down Gooseneck Trailer Hitch # 8339 designed to fit that Reese Rail Kit.
  view full answer...
• Will the Draw-Tite Gooseneck Installation Rail Kit # 4435 Fit a 2004 Dodge Ram 3500 Short Bed Diesel
  The Gooseneck Hitch Installation Rail Kit, # 4435, is the correct rail kit for your 2004 Dodge Ram 3500 Short Bed Diesel. This rail kit works with the Draw-Tite Remov-A-Ball Gooseneck Hitch, # 6300, and the Reese Fold-Down Gooseneck Hitch, # 8339. This is also a custom rail kit that does not require any drilling to install. I have attached a link to the installation instructions as well as links to the gooseneck hitches for you to check out.
  view full answer...
• Will Remov-A-Ball Gooseneck Install Kit from 1996 Chevy 2500 Fit a 2000 Chevy 2500
  Actually it depends on one key factor. The issue is that 2000 was a split model year for Chevy trucks. There were both C/K series and Silverados. Where people get confused is when they have a C/K series with the Silverado trim because up until the 2000 model year Silverado was just a trim package. So if you have a C/K series with the Silverado trim then the installation kit, # 4440, for the 1996 C/K 2500 will also fit the 2000 C/K. But if you have an actual Silverado and not a C/K then...
  view full answer...
• Flip Down Gooseneck for my 2000 Ford F-250
  We have several solutions for adding a gooseneck to your 2000 Ford F-250 but the Fold-Down Gooseneck Trailer Hitch part # 8339 is not a confirmed fit by itself. Instead use the Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit part # C61332-52 this has the rails and custom side plates to allow you to attach the flip down ball to securely. It is very cost effective and will do a great job.
  view full answer...
• Fold Down Gooseneck Hitch Recommendation Similar to Atwood B25CL
  The Atwood B25CL that you referenced is a 25k fold down style of gooseneck hitch just like the Draw Tite part # 8339 that you referenced. If you have a universal style of application and need just a hitch plate with a fold down ball this would be a great option.
  view full answer...
• Which Gooseneck Hitch Do I need to Tow Gooseneck Trailer With 2003 Ford F-150
  There are gooseneck hitches that fit the 2003 Ford F-150 but the Draw-Tite hitch part # 8339 is not a fit. The Draw-Tite Gooseneck hitch is designed for newer F-150 trucks. I recommend Curt's Folding Gooseneck hitch part # C61652-637 for the 2003 Ford F-150 with a 6-1/2 foot or 8 foot bed. The Curt Under Bed Folding Gooseneck Hitch comes with the rails that are custom fit for the 2003 Ford F-150 so there is not any drilling required for installation. The Curt Gooseneck ball folds downs...
  view full answer...
  
• Fifth Wheel Hitch Recommendation for Attaching to Draw Tite Fold Down Gooseneck Hitch
  The best fifth wheel hitch option we have for a truck like your 2017 Ram 2500 that has the Draw Tite Fold Down Gooseneck hitch # 8839 installed is the Demco Recon hitch part # DM8550045 which secures to the truck bed by grabbing onto the gooseneck hitch ball and due to it's jaw design provided a tight and quiet connection to the fifth wheel trailer. I attached a review video for the Recon for you to check out as well.
  view full answer...
• Can a Toolbox be Used while Towing a Gooseneck Trailer with a 2001 Ford F-250 Short Bed
  The space needed in front of the gooseneck ball depends on how large the coupler is that fits over the ball. Remember that the coupler can not only rotate on the ball side to side but also tilt forward and back some so you would want to take some measurements without the box installed to determine about how much travel there is at the coupler and then get a box that will fit. The other thing to be concerned about is when making tight turns. If the gooseneck trailer is squared off at the...
  view full answer...
• Replacement Fold-Down Gooseneck Hitch for 2001 GMC Sierra 2500HD
  The Reese Fold Down Gooseneck Hitch and its install kit, part # 8339-4434 are indeed a fit for your 2001 GMC Sierra 2500HD. The plate itself is 12 x 14-1/2 inches, slightly wider than the hitch you currently have. To install the hitch, you'd first need to completely remove your existing hitch and frame mounting rails. Since your existing frame rails haven't been tested with the Reese hitch, the weight capacity would be completely unknown if you tried to reuse them. Since I don't know...
  view full answer...
• How to Release the Gooseneck Ball on a Gooseneck Trailer Hitch for a 2002 GMC Sierra 2500HD
  If you have a Fold Down Gooseneck Trailer Hitch like # 8339, that you have referenced, all you have to do is pull on the ring and the ball will fold out. But there are other types of gooseneck hitches that hide the ball in the bed. Some require a handle that exits from under the bed into the driver side wheel well, like # 9460. For this type, you would pull the handle out to release the locking pin, turn the ball over, and push the handle back in to lock it in place. If you can determine...
  view full answer...
• Fit of Draw-Tite Gooseneck Hitch 8339 with Installation Rail Kit 4435
  Yes, the Draw-Tite gooseneck hitch # 8339 is a confirmed match to the installation rail kit # 4435 which fits your 2007 Dodge Ram 2500 6-foot-bed mega cab. We offer both together as part # 8339-4435 and each portion is available individually too as parts # 8339 and # 4435. If you need a wiring harness for the truck, we have Hopkins in-bed gooseneck harness # HM42137.
  view full answer...
• Gooseneck Trailer Hitch Installation Kit for a 2011 Ford F-150 Long Bed
  The correct installation kit for a 2011 Ford F-150 and gooseneck hitch # 8339 is Gooseneck Trailer Hitch Installation Rail Kit, # 4437. This kit fits the following: 2009 - 2011 Ford, F-150, New Body Style, Regular Cab w/6.5 and 8 ft. Beds 2009 - 2011 Ford, F-150, New Body Style, SuperCab w/6.5 and 8 ft. Beds 2009 - 2011 Ford, F-150 SuperCrew, New Body Style, w/6.5 ft. Beds You may also need a template for easier installation, # 6425. According to Draw-Tite, the correct hitch for a...
  view full answer...
• Available Folding Gooseneck Hitch for a 1997 Ford F-350 Single Rear Wheel
  At this time, we do not carry a folding gooseneck for a 1997 Ford F-350, but we do have other types of goosenecks available. The Curt Quick Goose 2, part # C630-636, is a complete kit that includes the under bed rails and the gooseneck hitch. There is much less bed drilling involved with this kit than the folding style goosenecks. The Quick Goose 2 uses a couple of wheel well handles that will engage and disengage the ball without having to climb in the truck bed at all. The hitch has...
  view full answer...
• Gooseneck Hitch Option For 2014 Ford F-350 Cab & Chassis With Flat Bed
  We do not offer any custom gooseneck hitches for your F-350 Cab And Chassis, but we do have the Fold-Down Gooseneck Trailer Hitch with Installation Kit, part # 8339. This hitch has a 25,000-lb gross towing capacity and includes a 2-5/16 inch ball. The ball folds down so you have full use of the truck bed when not towing. This kit would require custom brackets and hardware to mount on your flat bed. The hitch must be attached to the frame of the truck and cannot be mounted with just the...
  view full answer...
• Draw-Tite Fold Down Gooseneck Trailer Hitch and Installation Kit for a 2010 Silverado 2500 Long Bed
  Fold Down Gooseneck Trailer Hitch # 8339 will fit your 2010 Chevy Silverado 2500 long bed when using the custom installation kit # 4434. The hitch itself isn't vehicle specific but the installation kit is. So as long as you use install kit # 4434 you can use gooseneck hitch # 8339. I have linked a video showing an example installation of the kit for you.
  view full answer...

Do you have a question about this Accessories and Part?