1. Accessories and Parts
  2. Draw-Tite
  3. Fifth Wheel Installation Kit
  4. Fifth Wheel Wrench
Wrench for Reese Fifth Wheel Hitch Installation Rails or OEM Adapter

Wrench for Reese Fifth Wheel Hitch Installation Rails or OEM Adapter

Item # 58276
lowest price pledge
Retail:$22.20
Our Price: $20.17
You Save: 9%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.73 lbs
Quantity: 
Draw-Tite Fifth Wheel Installation Kit - 58276
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Replaces the wrench needed to install your Reese Signature Series fifth-wheel hitch or Reese OEM fifth-wheel adapter. Call 800-298-1624 to order Draw-Tite accessories and parts part number 58276 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Wrench for Reese Fifth Wheel Hitch Installation Rails or OEM Adapter. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (27)
  • Q & A (7)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Accessories and Parts - 58276

  • Fifth Wheel Installation Kit
  • Fifth Wheel Wrench
  • Draw-Tite

Replaces the wrench needed to install your Reese Signature Series fifth-wheel hitch or Reese OEM fifth-wheel adapter.


Features:

  • Replaces the wrench needed to install your Reese Signature Series fifth-wheel hitch or Reese OEM fifth-wheel adapter
  • Fits a 1-1/2" diameter nut


58276 Wrench for Reese Series Fifth Wheel Hitch Installation Rails or OEM Adapter




California residents: click here


Video of Wrench for Reese Fifth Wheel Hitch Installation Rails or OEM Adapter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Elite Series Underbed Rail Adapter Review

Today we're going to review part number RP30156. This is the Reese Elite Series Underbed Rail Adapter for standard fifth wheel trailer hitches. This part is designed to work with an already installed Reese Signature Series Fifth Wheel Underbody kit. You can see we have four pucks installed here. You see on this particular vehicle, we have them sit inside of the bed liner as well. Typically you would have to make a large cut out for it.

However in this truck and this part, we we're able to just get away with just four small holes and it sits on top of the bed liner, with plenty of clearance. Once it's assembled, it's very easy to install. Just make sure these handles are pointing towards the center, and when they're locked you can see how this turns facing to the puck that's installed in the truck. Just lay it into place, and then make sure these handles are open all the way, to make sure that it's set into place. Then push the handles in. There should be some resistance as you push it in.

Once it's in place, use the snap rings to help lock it. You could also use your favorite padlock if you want to. When you assemble this, it's a good idea to get access to the jam nut right here to help make sure everything is tightened down properly. The part number for the wrench we're using is 58276. With our Underbed Rail Adapter installed, let's go ahead and put the fifth wheel hitch into place.

After we put our fifth wheel hitch into place, we'll go ahead and install the pins and clips. So our hitch will mount up to our adapter plate just like it would if it had rails already installed in the bed going across. That will finish it for review of part number RP30156 from Reese.


Customer Reviews

Wrench for Reese Fifth Wheel Hitch Installation Rails or OEM Adapter - 58276

Average Customer Rating:  3.5 out of 5 stars   (27 Customer Reviews)

Replaces the wrench needed to install your Reese Signature Series fifth-wheel hitch or Reese OEM fifth-wheel adapter.

- 58276
by:

This wrench was the perfect answer to tightening the bolts on my Reese Elite hitch adapter while installed in my 2016 Ford F350 Platinum. etrailer.com was one of very few places that even carried it. Their price was unbeatable. Shipping was very fast. Thanks etrailer.com



- 58276
by:

First of all, I give Etrailer.com 5 Stars as ordering, shipping and support are stellar. The four stars is for this product as it is lightweight for the job it does. I ordered a second one as the first one bent. I understand this may be intentional to prevent over tightening, but I bent one of the prongs on the first nut so I had trouble tightening the other three. New season and fresh install of the Reese puck-to-rail adapter so I got the new wrench for the loosened nuts and successfully tightened them all because I knew not to over do it this time.



- 58276
by:

All parts worked well and am very satisfied with installation and performance. The special wrench I bought to tighten the nuts was totally useless. The jaws spread very easily. If not for the wrench, I would have given the service and product a 5 star rating.


Comments
Use continues with great results. Only bad comment was on the performance of the wrench.
Wendell M - 04/04/2018



- 58276
by:

This wrench is the same as a 1-1/2" open end wrench except that it has thinner "jaws" than a standard wrench making access into the restricted space easier. It is probably possible to tighten the nuts with a standard open end wrench but it might not be possible to fully insert a standard wrench over the nut because of the thicker "jaws". It might be an experiment in busting your knuckles if the wrench slips off the nut.



- 58276
by:

The delivery was terrific. We received it in less than a week. Assembly was fairly simple. And we've installed it along with our 5th wheel hitch in our truck. The only problem was the wrench we purchased wasn't made to last. Thanks again



- 58276
by:

Thank you etrailer.com for finding the wrench and bed cover pucks for my signature series Reese 5th wheel , just exactly what I needed. Repeat customer, Bill S.



- 58276
by:

Product needs to be twice as thick, made of stronger material, or configuration could be like a line wrench. Couldn't even loosen nuts on new leg assys. without wrench opening up. Had to disassemble each locking mechanism and use a box end wrench to loosen. Tired of lifting the unit in and out of truck and assembling and disassembling unit to get a good fit.



- 58276
by:

Worked well in the set up. Little loose fitting for my taste. Switched to an adjustable for the final torque. Will carry in the truck for emergencies.



- 58276
by:

Since it's brand new I haven't yet used the wrench. I did check to make sure it fits my particular hitch and have every expectation that it will work just fine.



- 58276
by:

after you snug the 1" jam nut it tells you to go another quarter turn, the wrench I bought bent. maybe they need to make it a box end wrench


Comments
excellent
Dave m - 05/18/2015



- 58276
by:

Poorly made. The jaws spread on the second nut I adjusted. By the time I finished torquing the 4th foot the wrench was almost unusable. I was being easy on them too. Just stamped out of mild steel with no hardening done to the metal. I don't see any other way to tighten these without this tool though.



- 58276
by:

I really didn’t care for this wrench, started to widen out and slipping off the nut. A crescent wrench worked better.



- 58276
by:

Works good



- 58276
by:

Absolutely terrible product. Reese should be ashamed. The metal is so soft that any attempt to tighten the nuts it is designed to work on bend the jaws of the wrench open. I had to put it in a vice and close the opening back up after each foot I tightened. The worst part is, it's the only tool that will work for the job so your stuck with this or nothing.



- 58276
by:

Wrench bent first use, to cheap to get the 1/4 turn on nut, will go to Harbor Freight and buy a cheap wrench, heat it and bend to fit, will last forever



- 58276
by:

Good if you don't have a nut too tight, if nut is too tight the wrench slips. It is good for what it is intended for.



- 58276
by:

works like a champ, quick shipping



- 58276
by:

Thank you for having the right tool



- 58276
by:

Wrench bent first time I used it. Did hit it with a hammer or anything. Tried to loose bolt and top prong bent. Wrench is useless now. I did get it when promised however.



- 58276
by:

Made it easier to install and adjust



- 58276
by:

Worked perfectly!



- 58276
by:

Everything was delivered on time.Haven't had time to install yet. Service was great.



- 58276
by:

It helped but be careful it will bend



- 58276
by:

Makes assembly easy!



- 58276
by:

the jaws on the wrench bend the metal in to soft


25
27
Show More Reviews

Ask the Experts about this Draw-Tite Accessories and Parts

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Installed by:
Kathleen M
Employee Sarah W
Updated by:
Sarah W
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624