Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This push button switch allows you to control on/off functionality for RV lighting and other applications. Button is pushed once for "on" and pushed again for "off". 2-Wire design with 4" wire leads.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, Kevin here with etrailer. Today I'm gonna be showing you how to install the Diamond on-off push button, RV lighting switch. So as you can see, this on-off switch is very, very tiny. So it's gonna be super discreet which is exactly what we need for our light install, that we're doing right now. So as you can see, we got a light bar we're gonna be running some power to. We wanna be able to control this without actually touching all the other lights because we don't want to have this on 24/7 when we have our other lights on, just because this light is gonna be blinding.
So that's where this is gonna come in handy. If you look at it very closely there's this little piece you can kind of unscrew off and then you could actually hide this inside of a wall with just the button itself sticking out. And then this kind of capping it off to make it look nice. But with our walls today on this trailer, they're too thin. We're not gonna actually be able to put anything in the wall itself.
So we're just gonna be using some double-sided tape on the back of our switch here and then sticking it on the wall. And because it's all black, it's gonna fit in really nice with the aesthetics of this trailer because of the wall that we're gonna be sticking it on is all black. So it won't really be that noticeable. So I decided this is probably a good height for our toggle switch here. So I'm gonna go ahead and I'm gonna strip back our wire loom.
I'm gonna be real careful not to actually cut my wire yet; 'cause I'm only gonna be cutting the power and not actually the neutral. There we go. So now I can go ahead, make a little break in my power here. And you wanna make sure that you have this while your power's disconnected. We don't want any surges going through and messing anything up.
And because I had already made this so tight before the first time I installed it, I'm gonna add a little bit more length to my wire. Just so that I can have this re-attach correctly, when we tie in our light. Crimp that down. All right. Now we can go ahead and start running our wire over for our light bar. We're gonna go ahead and kind of bend it back down 'cause that's gonna go ahead and match right back up to our original wire, that we cut. And we're gonna butt connect to that to one side of our switch. 'Cause we want this to always be on and only our light bar to be operated by the switch. So with these two connected back together again our light down there is gonna work anytime our switch is turned on for all of our other lights. We can go ahead and crimp that to one side of our switch. And then for the other side, we're gonna use another butt connector. Just go ahead and put it on this side first. And run that over to the power wire that we have running to our light bar. So now we're gonna go ahead and do a little test of our wiring. Make sure that our switch is actually working. As you can see the lights are on the ceiling and down at the bottom for our other lights. Let's go ahead and flip the switch. And our light bar is working. And easily able to turn on and off. That way it's not always blinding, anytime he's having to just walk in and out of his trailer, but it's gonna be there and useful whenever he is trying to pull his race car in. So I got some industrial double-sided tape here that's gonna do a really good job at holding this in place, since we're not actually implanting this inside the wall and we're just sticking it on. But let's go ahead and do that now. And luckily this pretty much fits this body of our switch here. Go ahead and stick that on. And then we can go ahead and peel back our backing. And get it exactly where we want it. And just press down nice and tight. Make sure this is really getting stuck on there. Now that our switch is in place. I'm gonna go ahead and clean up all of our wiring here using some wire loom. Now with our wiring all covered up, looking nice and neat. That'll do it for our installation here of the Diamond on-off push button switch for RV lighting. Here that we install on our enclosed trailer for our light bar. My name's Kevin. Thanks for watching, guys..
Average Customer Rating: 4.7 out of 5 stars (23 Customer Reviews)
This push button switch allows you to control on/off functionality for RV lighting and other applications. Button is pushed once for "on" and pushed again for "off". 2-Wire design with 4" wire leads.Impressed with the fast delivery. The part was just a switch for the bathroom fan so simple install, my next order will be hot water heater or an air conditioning unit for my newly purchased(used) Denali Camp trailer!
This switch was just what I needed for the overhead, dinette fixture, in my Jayco JayFlight RV. The item was delivered quickly & easy to install, with a couple of wire nuts. Thanx.
This replacement switch for my vent was exactly as described, and exactly what I needed.
Fit and worked perfectly for ceiling fan in bath area. Winnebago Vista.
Just received order. Have not yet installed. Everything looks great. Great service. Also arrived in a timely manner. Especially since ordering at Christmas time. Definitely will use etrailer in the future.
Worked great, just what I needed to fix my motorhome lights. Thanks!
Not sure if this item would work for me and used help page. The team was great when letting me know the correct one for my light.I ended getting 2 of them. Order came faster than expected and was same as the one I Had. Thanks to your team.
Just a replacement switch, exact match.
Fast shipping. Product looks good
Dennis
8/19/2021
These switches are still working great! I ordered more to have extras on hand.
An exact match to my existing equipment and work flawlessly.
Part fits and works well
Perfect switch, Fast shipping. Thank y ou
Fit perfectly for the lamp. So glad to have the light functioning again. Thank you!
Shipping was fast! & it was EXACTLY what I needed! Thank you so much!
well made
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tj
11/20/2020
Switch is still working great! Perfect replacement.