Clip for Dexter Steel Brake Line Tubing

See what our Experts say about this Dexter Accessories and Parts

• Electric Over Hydraulic Actuator and Parts to Add Disc Brakes to Third Trailer Axle
  Sounds like you have a surge brake coupler on your trailer currently and are looking for a way to convert it to an electric over hydraulic setup and then also add brakes to your third axle. The electric over hydraulic actuator I like the best is the Cargo Towing Solutions HydraStar Electric-Hydraulic Actuator for Disc Brakes # HBA16. This actuator has proven to be very reliable and rarely has problems. The Kodiak 225 caliper that you have on your other axles is a very common caliper that...
  view full answer...
  
• Does Titan Brake Line Tee Secure Trailer Brake Lines
  Indirectly yes, the part # T0778500 does get used with brake hoses. If you check out the attached picture you'll see that holds a union tee that hoses run to. We do have clamps that were designed to secure brake lines like with the part # A0500 for 1/2 inch and # A0250 for 1/4 inch. We also have clips, # T0936600, for more brake line support.
  view full answer...
  
• Where to Place the Four Loom Clamps to Support Brake Lines in Kit HBA16-252-82
  In short; they're not secured to the trailer frame. Presumably you would strategically place the loom clamps near those fittings you mentioned from kit # HBA16-252-82 to limit any movement of those fittings. The rigidness of the metal lines will help keep those metal lines in place so the clamps would not be needed for the metal lines. We do have other loom clamps if you want more, # A0500 for 1/2 inch and # A0250 for 1/4 inch. We also have clips, # T0936600, for more brake line support. I...
  view full answer...
• Parts Needed to Add Disc Brakes to Third Axle to Use Titan Disc Brake Kit with Triple Axle Trailer
  You can add the parts needed to make Titan disc brake kit # T4843800 compatible with a 3-axle trailer. If you do I recommend placing the actuator as close to the axles as you can. You may also need to use larger diameter brake line especially if you have to leave the actuator closer to the front of the trailer. As for the parts you would need: 1 disc brake kit # K2HR35D 2 of bearing # L68149 2 of bearing # L44649 1 of seal set # RG06-050 2 of flexible hose # T0776500 2 of tee # T0778500 2...
  view full answer...

Do you have a question about this Accessories and Part?