/
Dexter Axle/
Trailer Axles/
Lift Kit/
Single Axle/
2-5/8 InchItem # K71-723-01
Retail:$94.82
Our Price: $66.55
You Save: 30%Orders above $99 qualify for Free Shipping
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #9 Torflex axles with a 2,000-lb capacity.
Features:
Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.
Installation Details 
Video of Torflex Lift Kit - Single Axle - 2-5/8" Lift
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the number nine Tour Flex two and five-eighths inch lift kit for a single axle. Now this lift kit will raise your trailer frame to provide two and five-eighths inches additional clearance between your trailer frame and your axle. It will include the spacers, the mounting hardware for a single axle application, and these are designed for use on trailers with the single number nine Tour Flex axle with a 2000 pound weight capacity.It includes everything shown here on the table. It'll include the two number nine frame spacers, 12 plain washers, eight locking hex nuts, eight hex screws, and a nice set of detailed instructions on how to install everything.The last thing I want to show you is just the height of the lift kit, from the very bottom to the very top is gonna measure right at two and five-eights inches. That should do it for the review on the number nine Tour Flex two and five-eighths inch lift kit for a single axle.
Average Customer Rating: 4.4 out of 5 stars (94 Customer Reviews)
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #9 Torflex axles with a 2,000-lb capacity.Easier to install than I expected. 544916
Service was very good. Received product in just a few day. Have not installed the lift kit yet bit it appears to be very good quality. 462564
It was a easy fix to lift my 1988 Jayco, about 2 hours including finding and placingthe jack stands, didn’t have to take off the wheels like the video recommends, used wrenches instead of hooking up air and using the impact gun! Looks great when I kick back and look at it! 565272
Product was as advertised and communication with this company was excellent. Shipping was fast and free (included) and etrailer online assistance was friendly and accurate. Good company. 558066
I ordered this kit to provide extra room for tires(AM3S120) that have a higher speed rating. Everything shipped quickly! The kit fit perfectly with no problems. 502435
Works great! This product comes with all the parts required to bolt on to the camper/axle... 519073
Ordered my part, and it arrived next day. Excellent service. Thank you, 669463
Product arrived in new condition. Shipping was timely. 653205
Easy to install, lifted our TAB just the right amount. 632082
Perfect fit for my application, a 2017 Riverside Retro 509jr teardrop trailer. Did the job myself as I am a mechanic and have more tools than Snap-On, and it took just over an hour. Etrailer has and will continue to be my go to supplier, thank you George! 621925
This kit raised my trailer so I can back into my driveway with out draging. It was easy to install following the video form etrailer. 614795
Easy to install, fit perfectly, well made, will perform for many many years. 604492
The lift kit part looks like it was manufactured properly (I haven't installed the lift yet), but as many have mentioned, the paint job sucked. The hardware bag ripped open in route and the loose parts rattled off a lot of the paint. I repainted before installing. The package shipped the day of the order and arrived on time. The 4 Star rating was due to Dexter Axle's packaging...not etrailer.com. I will order from etrailer.com again. 584554
Everything is great. The only thing was we had plenty of bolts and washers, but no nuts. Luckily I found extra in my garage. Other than that, great product. 541817
Extremely simple to install. Very sati sfied. 519994
Product fit my max-flyer camper perfectly... raised frame 3inches. Very pleased!! 481339
I am pleased to leave a review and a recommendation for etrailer and especially Geoffrey F, I am to a RV and knew what I wanted and needed and Geoffrey helped me with my order. Very fast shipping and I can't wait to install the spacer kit on my pop up camper to gain some clearance. Thank you you etrailer and Geoffrey for your help and a great product! 480212
Service was very good. Received product in just a few day. Have not installed the lift kit yet bit it appears to be very good quality. 462563
Nice thick gage steel, packaged well, proper amount of fasteners. Only problem seems to be not enough paint baked on leaving a few minor areas not completely coated. Easy fix with some bed liner spray or undercoating. 457677
They fit and they do their job. That's about it. Only the outside half of the lift bracket was powder coated. The inside where the welds are was bare steel and was already starting to rust. 438835
Just installed this last night. It fit just as I expected and will give me the ground clearance I was looking for. 437123
Review from a similar Dexter Axle Torflex in Accessories and Parts
The customer service rep was very nice and helpful in determining which lift kit my axles needed. The parts are well made. The pre-drilled holes were right on the money and aligned perfectly. If you are looking for a little more clearance or trying to prevent tire rub when fully loaded, I absolutely recommend this lift. 613994
Review from a similar Dexter Axle Torflex in Accessories and Parts
Worked just as they said it would. Only took a few hours with hand tools. If I were doing this more than once I'd have an impact wrench instead of a ratchet. So far I have never had a bad experience with etrailer. Ordered on phone Wed, received it on Friday. What more could I ask. The trailer axle had been replaced by previous owner and the tire rubbed the fender. etrailer walked me through on who to contact and determine which Dexter spacer I needed. Great sales reps and thanks Paula 643903
Review from a similar Dexter Axle Torflex in Accessories and Parts
I love this product and the lift it gave my torsion axle equipped cargo trailer, which was basically a "low rider" and would occasionally drag the tail on step gas station entrances, etc. I installed it myself. It was time consuming and require multiple jacks and jack stands to accomplish it, but anyone that's mechanically inclined and also has a torque wrench can accomplish it. 505245
Review from a similar Dexter Axle Torflex in Accessories and Parts
Very disappointed with this item. Poor coating, loose packaging, not enough flat washers, and I had to run a tap down all the nuts so they would go onto the bolts. It would have been helpful to have the torque specs for the bolts. 443529
Review from a similar Dexter Axle Torflex in Accessories and Parts
BUYER BEWARE: DO NOT BUY THIS KIT TO LIFT A WINNEBAGO MICRO MINI TRAVEL TRAILER WITHOUT MEASURING YOUR AXEL BOLT SPACING! The “expert” advise of Connor L. to the question “Best Way to Lift a 2018 Winnebago Micro Minnie 2106FBS” that this is the “best way” is WRONG / MISLEADING at best. In fact this is the the WORST WAY because this kit WILL NOT fit on a Winnebago Micro Minnie 2106FBS which is fitted with a dual Lippert Component 3500 lb rated torsion Axel Part No. 866-524-7821 (Winnebago part # 20141311000). (See attached picture). Crawl under your trailer and look for the axel label that is in the center underside of the axel. If you have the same axels that I have, DO NOT BUY THIS KIT. Instead buy two single axel Lippert Part Number LC270628 which does have 9 inch bolt spacing. It will give you more lift and the two kits are less expensive than this dual axel kit. Also as noted by others, my initial inspection of the parts straight out of the box is that the protective coating / paint on these is minimal / inadequate at best. IMHO, additional undercoating / painting / powder coating will be needed to avoid corrosion on this undercarriage part. 634115
Review from a similar Dexter Axle Torflex in Accessories and Parts
All went well, like others said the paint was flaking off, doesn't look like they used primer under the topcoat. I'll just spray on some undercoating when the weather warms a bit . Install went quick. both sides done in 2 1/2 hours. Overall, the 2 5/8 lift is just right for our purposes. I installed this on a 2018 Lance 2285. The only reason for a 4 star rating is the paint quality, otherwise an excellent product. 502358
Review from a similar Dexter Axle Torflex in Accessories and Parts
Good product and easy to install. Just inspect before shipping and paxkage better. it had paint knock off it. Im gonna paint it and spry it wit undercoating to make rust free 483468
Review from a similar Dexter Axle Torflex in Accessories and Parts
Good quality fasteners and steel material. Instructions were easy to follow with clear illustrations. Shipping was prompt and the staff was easy to talk to about returning. Great customer service. 572128
Review from a similar Dexter Axle Torflex in Accessories and Parts
Good kit, install straight forward, installed on an Airstream Flying Cloud 23D 2017. I needed to move the shock absorbers to install, then put them back on. I also needed to relocate a gas line that went to the water heater, as it was run through a gap in the axel mounting plate. Would have given it 4 stars but they shorted me one washer. I reused a washer from the old hardware. 392097
Review from a similar Dexter Axle Torflex in Accessories and Parts
Everything works as said but...... paint sucks packing sucks missing bolts and washers. Crappy welds seems like it’s about 100$ over priced for what you get and the quality. Will it work yes. Did I have to reweld and repaint then yes. If I didn’t have to ship them back I would return them. But it seems like less work just to fix them and repaint. 483071
Review from a similar Dexter Axle Torflex in Accessories and Parts
This is for a Dexter axle not Lippert axle. This has a hole pattern of 8" and Lippert requires a 9". It could come with a better paint job. I returned my order and the paint was flaking off without even installing it. Repaint it before you install as it just a chunk of metal. 470819
Review from a similar Dexter Axle Torflex in Accessories and Parts
Purchased the lift for my 2006 StarCraft Centennial, which rides extremely low to the ground. The kit fit perfectly and the end result is I no longer scrape the rear of the trailer pulling into my driveway! The only draw back to the kit is the fine threads on the plated bolts makes them difficult to bolt together without an impact wrench. 493764
Review from a similar Dexter Axle Torflex in Accessories and Parts
I give a "good" rating only due to small discrepancies such as seen in attached pics. The product is not powder coated, as claimed, yet appears to be enamel baked on without primer. I went no further than opening the box and viewing the contents, after seeing the ragged condition the product was in (see pics). Seems strong enough to do what was intended, just not on my TT. Will I buy from etrailer in the future? YOU BET! 410954
Review from a similar Dexter Axle Torflex in Accessories and Parts
Poor quality hardware. Bolts had many burrs and would not thread without binding. 445053
Review from a similar Dexter Axle Torflex in Accessories and Parts
Good quality part and bolts. Didn't fit my Livin Lite Jeep trailer. They are 1/4 inch too wide. Going to cut them down and install. Looks like all the dexter lifts are the same width. Livin Lite used a narrow axle with 1 3/4 wheel spacer so the pivot on the axle is right agains the frame. That is a Livin Light issue not Torflex. Took off one star for the paint. As others noted it is comically thin. The cavity where the bolts rested in shipping chipped away all the paint and they were in a plastic bag. You could build this yourself from 2" tubing. You would need to go source all the bolts, but wouldn't be that hard. Going to keep it and cut it down as noted above since it saves me time at this point. This would have been a 15 minute install had my trailer had a wider perch. 474984
Review from a similar Dexter Axle Torflex in Accessories and Parts
This kit worked great, less than 2 hrs. to install. Like other reviews the paint is the weak point, easily chipped off due to poor surface prep and no primer. Powder Coat would be huge improvement, Price was good for Dexter factory parts and the hardware was good quality. Be aware the nuts are self locking (no lock washers) and only go on one way. Would liked to have a little more lift so some height options would be nice. 495937
Review from a similar Dexter Axle Torflex in Accessories and Parts
Lift kit works well, seems well engineered. Hard to install, but I knew that. 251761
Great. Really helps on rough roads and steep driveway transitions. Dont notice a mileage difference. Airstream should use an axle with steeper angle!
Stephen L - 05/26/2017Review from a similar Dexter Axle Torflex in Accessories and Parts
Was a retrofit for my 2018 Forest River Flagstaff A-Frame Model 21TBHW. Dexter #10 Torflex axel No drilling or welding but tires do need to be off for the lift bracket install. Instructions provided are well written & clear. You will need jack stands and a good torque wrench to complete the install correctly. No issues with brake cables being short. If you can or have rotated your own tires this should not be a problem for you. Bolts have to be torqued and even with a great torque wrench and a 3 foot pull arm you are in a tight spot so if you can't bench press 150+ you need to get a battery or air impact torque driver. Hope this helps. I am very happy with the install and got about 3.5" of lift easy to see in the photos. 522256
Review from a similar Dexter Axle Torflex in Accessories and Parts
Perfect fix! Lifted up the camper just right for the 2 gray tanks I installed this past winter. Install was as per the instructions. 512249
Review from a similar Dexter Axle Torflex in Accessories and Parts
I ordered the Dexter K71-707-02 lift kit for my Haulmark Transport trailer. It was on back order and took two weeks to arrive but etailer.com communicate this to me with a phone call. I thought that was great customer service since most companies these days just email if anything. The product arrive as described accept for the poor quality finish. I stripped it down and re-painted it. That was not such a big deal since I painted all the parts as I installed them and touched up my axle, hubs and under body while the wheels were off. It installed easily and raised my trailer just as I needed. My trailer was so low it scraped on drives and the rear stabilizer jacks did not have enough room to deploy. Tip: The nuts in this kit are locking nuts and require a considerable amount of torque to tighten them. I used a pneumatic impact gun that made the job go much quicker. 494023
Review from a similar Dexter Axle Torflex in Accessories and Parts
This is a Dexter lift kit for there Torflex axles. The hardware is good quality. My only negative opinion about it is the quality of the paint job. No primer, most of the paint fell off in the box! I will need to knock what little paint is left off and do it correctly before I can install it. etrailer did a great job of communication and was quick to ship. Accurate description and the correct part. Thanks etrailer! 394215
Review from a similar Dexter Axle Torflex in Accessories and Parts
I ordered this kit in mid-May after seeing an email about it from a competitor site to etrailer.com. I ordered from the other site then got an email stating that the kit was on back order from Dexter until the end of June. I googled the Dexter part number and found that etrailer.com also sold it, and even better, etrailer was offering free freight and a slightly lower cost. Since the kit is heavy, free freight would save me about $40, so I cancelled the order with the first company and re-ordered from etrailer.com. I got an email from them as well about the extended back order but then, I also got a follow up call from them explaining the situation. The call was an extra added touch that I appreciated. Then, right at the end of May, I got an email stating that my Dexter kit had shipped, so I figured that etrailer.com must have put some pressure on Dexter to get off their butt and ship it! The kit itself was great, really well made parts, powder coated and heavy gauge. Honestly, I am surprised that they sell it for only $150. The install is tricky and will take you 6 hours if you are good with tools and like wrenching. Don't attempt this project on your own if you are not. Pay a trailer guy $400 to do it. You have to keep the axles aligned when you drop them...and the bolt placement is not great so you have to have hands that can fit in the tight cramped space and be able to get a wrench on the. Over all, I am very happy with the lift, it was a pretty simple and cost effective way for me to get better clearance for my Airtsream.....Airstreams are notoriously low and with the approach I have from my street to the driveway, I constantly battled dragging either the hitch or the rear. This kit solved that. I am super satisfied and highly recommend it if you are in the same situation as I was. Buy it from etrailer.com, they have the best customer service I have experienced when buying trailer and camping items on the internet. 258114
The lift kit has worked out very well. I notice that things I. The trailer bounce around a little more since I did the lift but overall I am still glad I did it since I no longer worry about dragging the rear end of the trailer when entering or leaving my driveway. Very happy with my purchase!
Dan M - 06/06/2017Review from a similar Dexter Axle Torflex in Accessories and Parts
Product fit right in easy to install. Only issue we had to mount spacer oppsite direction bc our camper had bracket welded opposite of what instruction imaged showed. That however is a design issue with our 04 jayco. 466933
Review from a similar Dexter Axle Torflex in Accessories and Parts
Lift kit was used on Jayco X17Z Camper, as I wanted to do more rural camping and gain better ground clearance, as this camper is very low in the first place. Product was great and everything fitted nicely with no issues, see pictures. The only issue I had was with the nuts and bolts, they were quite tight on the threads, certainly won't come undone. 404202
Review from a similar Dexter Axle Torflex in Accessories and Parts
Just got my lift kit part. I am having it installed in 3 weeks so I'll write more later. I did notice people complaining about the powder coat, they aren't powder coated and I don't see where it said they were. I hope the install goes well. 467987
Review from a similar Dexter Axle Torflex in Accessories and Parts
Shipped on time, easy install. Approx. 1 hour. Lifted the R-Pod trailer, to a height, worth having. Before installation, the trailer would drag, just leaving the parking lot. Now it is usable. Will add a taller tire, when the old ones wear out. 503281
Review from a similar Dexter Axle Torflex in Accessories and Parts
Perfect fit, easy install, and just enough extra height to keep my jack from scraping all the time. It definitely helps to have an impact wrench to deal with the tapered thread suspension bolts. 526911
Review from a similar Dexter Axle Torflex in Accessories and Parts
Very fast shipping, and very nice people to work with. Will recommend this company to every body. Will be putting them on tomorrow. 667802
Review from a similar Dexter Axle Torflex in Accessories and Parts
Product as advertised. Easy to install and provided the proper leveling required due to increased truck rail height. My F150 Power-stroke is 2” taller than stock. etrailer is exceptional in communications on my order and as fast as the other website! 666324
Ask the Experts about this Dexter Axle Accessories and Parts
Do you have a question about this Accessories and Part?
Do you have a question about this Accessories and Part?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.