Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Galvanized steel resists rust, making the assembly great for boat trailers. Mounting flange has 5-bolt pattern.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Demco Galvanized 12 Inch Marine Brake Assembly, part number 23510. This is a 12x2 galvanized hydraulic brake assembly. It's referred to as a 12x2 due to its dimensions. From here to here is 12 inches. The width of the brake shoe is two inches. It features galvanized backing plates, stainless steel spring hardware along with plated wheel cylinders and riveted marine brake shoes.It also works great on non-marine applications as well.
Weight capacity for this item is 6,000 pounds per pair or 3,000 pounds per each assembly. This is the right hand or passenger side assembly. It says "right" right here but you can also tell when the short shoe, this being the short one, the short shoe always faces forward. This would be aimed at the front of the trailer on the passenger side.It is a single servo assembly. You can tell right here with the plunger, it's a single plunger.
It comes from the wheel cylinder. This uses 12 inch hubs or drums for wheel size of 14-1/2 inches to 16 inches. The mounting bolts are sold separately and it does require periodic manual adjusting. The way that's done is right back here you can see the rubber plugs that fit over the adjustment holes, whenever its time to adjust you'll just pop those off and make your changes right through there.That should just about do it for the Demco Galvanized 12 Inch Marine Brake Assembly, part number 23510.
Average Customer Rating: 5.0 out of 5 stars (25 Customer Reviews)
Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Galvanized steel resists rust, making the assembly great for boat trailers. Mounting flange has 5-bolt pattern.The Drum Brake Assembly was extremely great. The backing plate and the cylinder are plated so they will not rust or corrode. The springs are stainless steel so they will not corrode. They fit on my axle very good. I had no problem with them. They work just like when the trailer was new.
One Year Follow-Up - This was an extremely simple and cost effective option to repair my trailer brakes. One side had been contaminated by a leaky grease seal, but I replaced the brake assemblies, seals, bearings, and races on both sides of my single axle fresh water boat trailer at the same time. I estimate about 3000 miles on this trailer since installed and everything is still working great.
I had no idea that I could purchase an entire brake assembly - ready to bolt on! The local trailer dealers wanted $98 per wheel, just for the shoe lining alone. I saved over 60% and got all new parts. Put them on today, bled the brake lines, and went to pick up a skidsteer loader. Everything works perfectly. I will not buy trailer parts anywhere else from now on.
Dan
Perfect fit for my trailer axle and hub. Easily a match for a product I bought previously and costing a good bit more. Buy with confidence.
It was a great experience shopping on etrailers.com
They had everything I needed and checkout was fast
and easy. I had my parts in 2 days.
Thanks etrailer.com
I have ordered items from etrailer before never a problem,this was before Covid and all the other problems since then this order took way longer to receive but I am thank-full they had what I wanted and was able to get it shipped to me I will still do business with them.
Excellent product
very fast service and delivery
I appreciate the speedy delivery.
Good stuff
One Year Follow-Up - This was an extremely simple and cost effective option to repair my trailer brakes. One side had been contaminated by a leaky grease seal, but I replaced the brake assemblies, seals, bearings, and races on both sides of my single axle fresh water boat trailer at the same time. I estimate about 3000 miles on this trailer since installed and everything is still working great.
Perfect fit for my trailer axle and hub. Quality construction and easily a match for parts I purchased the week prior costing quite a bit more. Buy with confidence.
Replaced 23 year old brake assembly with this and it was a perfect fit. All of the components were installed on the assembly as described - just bolt on, attach brake line,bleed and go.
Great experience. Installation video and customer service was very good.
worked perfect on my 6000lb loadrite trailer. I added extra grease to the wheel cylinder bolts and adjuster threads. I'll be dunking it in saltwater.
items as described,quality parts, bolted right up..
great price, fast shipping.. thankxs etrailer
Great price, and was easy to install. Looking forward to many safe stops. The demo videos were most helpful.
These are excellent.
Great stuff
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.