View Cart
Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1

Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1

Item # DW05741-1

lowest price pledge

Our Price: $1.44

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.13 lbs

Quantity: 
In Stock, Ships Today
Deka Ring Terminals Accessories and Parts - DW05741-1
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Wiring
  • Wire Connectors
  • Ring Terminals
  • Deka
  • 12-10 Gauge
  • 3/8 Inch
This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability. Call 800-298-8924 to order Deka accessories and parts part number DW05741-1 or order online at etrailer.com. Free expert support on all Deka products. Guaranteed Lowest Price and Fastest Shipping for Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (2)
  • Q & A (15)
  • Photos
  • Why etrailer?

Deka Accessories and Parts - DW05741-1

This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability.


Features:

  • Fits 12-10 gauge wire
  • 3/8" Ring inner diameter
  • Heat-shrinkable nylon insulation allows for adjustability and provides durability
  • Yellow
  • Quantity: 1
  • 1-Year limited warranty


05741 Deka Ring Terminal - 12-10 Gauge - 3/8 Inch Ring Inner Diameter - Nylon Insulation - Yellow - Qty 1








Customer Reviews

Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1 - DW05741-1

Average Customer Rating:  4.5 out of 5 stars   (2 Customer Reviews)

This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability.

- DW05741-1
by:

Works great. Easy to use. 657123



- DW05741-1
by:

Order was complete and delivered in a timely manner. 374155


2
2

Ask the Experts about this Deka Accessories and Parts
Do you have a question about this Accessories and Part?


  • Recommended LED Light Bar for an Enclosed Snowmobile Trailer
  • I can help you with lighting up your enclosed snowmobile trailer. I would recommend the Optronics Opti-Brite # ILL08COB. This light produces 1400 Lumens so it would be very bright. The dimensions of the lens of this light are 4 by 16-1/2 inches. If you wanted more of a bar light I would recommend the Optronics Thinline Opti-Brite LED # ILL72CB, this light has 27 diodes and puts out 513 effective lumens. This light measures 21-7/8 inches long by 1 inch wide by 5/8 inches thick. Watts...
    view full answer...

  • Does etrailer Axle Teknology 10-Inch Brake Assembly AKEBRK-35L Include Trailer Wiring
  • The etrailer Axle Teknology 10-inch brake assembly # AKEBRK-35L and the matching right-hand unit # AKEBRK-35R come with two wire leads (from the brake magnet) that are just a few inches long. The actual 10-gauge wire you'll use to install the brakes, # 10-1-1, is offered by the foot. Either wire lead from each brake can be used for hot or ground since these are non-polarized. Often parts like junction box # 38656, 7-pole plug # H20046 and ring terminals # DW05741-1 are used to complete...
    view full answer...

  • Parts Needed to Re-Wire Car Hauler Trailer Lights and Brakes
  • We can help you with selecting parts to re-wire your trailer's lights and brakes. Trailer size affects the number and types of lights required to be DOT-compliant. I linked for you an article that covers the lighting requirements for trailers of various sizes. This will help you determine what is required for your specific trailer. For lighting you might want to consider one of our complete lighting kits. Kit # TL29BK uses standard incandescent light bulbs and kit # TLL9RK uses high-efficiency...
    view full answer...

  • 7-Way and Light Kit Recommendation for Boat Trailer
  • The cleanest way to install the # HM20048 would be to use a junction box like part # 38656. The junction box is weatherproof to protect the wiring connections from the elements. You'd also need some ring terminals, one 10 gauge # DW05741-1 and four 14 gauge, part # DW05702-1. I've linked you to a video showing the junction box being installed. The part # TLL36RK is a submersible trailer wiring kit that would work well on your trailer as well.
    view full answer...

  • Parts Needed to Re-Wire 18 Foot Car Hauler Trailer with 7-Way Connector
  • To re-wire your 18 foot car hauler with electric brakes on one axle, I recommend using a wiring junction box like # 38656 in order to make the connections from the lights and brakes. Then for a 7-way trailer plug, you can use the Hopkins # H20046. This connector has an 8 foot lead. The shorter 6 foot # H20044 or 4 foot # H20043 trailer connectors are also available. I recommend using a circuit tester like # 40376 to determine the functions for any wires that are not known, as just using...
    view full answer...

  • Getting Power to 12-Volt Accessory Pin on 7-Way Trailer Connector
  • To get power to the pin in the 1:00 position of the # PK12703 7-way trailer connector, you'd run a length of 10 gauge wire # 10-1-1 which is sold by the foot from the terminal for the 1:00 pin on the 7-way to the positive battery terminal, via a # 9510 40 amp circuit breaker. You'd need two # DW05741-1 ring terminals to connect to the breaker and a # 44-5356A ring terminal to connect at the battery.
    view full answer...

  • Repairing Ground Problem on Trailer With Tilting Bed
  • You do indeed have a ground problem, but no worries-we can get you through this! A trailer with a tilting bed will typically use a bolt on each side as a pivot which allows the tilting portion of the trailer to move. When the trailer is new, the pivoting mechanism fits together tightly and everything works great. Over time, this connection gets a little loose, and doesn't provide a consistent ground connection. Since trailers use the frame as the ground circuit instead of a separate...
    view full answer...

  • Installing HM20048 Molded 7-Way Trailer Connector on Surge Brake Equipped Boat Trailer
  • If you scroll to the bottom of the product page of the # HM20048 connector, you can see the color code chart that shows which colored wire carries which function. The yellow wire on the # HM20048 would carry the signal from the reverse lights, assuming that the center pin of the trailer connector is tied into the reverse lamp circuit. Since you're using a surge brake system, you won't need the blue wire as you suspected. If the trailer doesn't have a battery or any accessories that require...
    view full answer...

  • Installation of 7way Trailer Wiring for Brake Controller on a 2003 Dodge Ram 1500 with Factory 4way
  • I can help you with your brake and power connections for your 7way on your 2003 Dodge Ram 1500 with the factory 4way. The Brake (blue) wire does not run all the way back to the 4-pole at the rear; it stops at the connector that is located under the driver's side wheel well. In order to finalize the installation you must splice into this wire and continue it back to the plug. The Power (black) wire will need to be routed with a 10 gauge wire from the 7way adapter run to a 40 amp circuit...
    view full answer...

  • Brake Controller and 7-way Adapter Wiring Recommendation for a 2011 Toyota Venza
  • Yes, the Tekonsha P2 # 90885 is a great brake controller for your 2011 Toyota Venza. I would instead recommend the # ETBC7 kit over the Hopkins # 37185, because it includes all the parts you will need like circuit breakers, wires, butt connectors, ring terminals, and even a circuit tester included to install the 7-way on your Venza. If you decide to go with the Hopkins adapter then I recommend the 10 gauge wire like # 10-1-1, butt connectors like # 05732-2, ring terminals like # DW05741-1,...
    view full answer...

  • Brake Controller Power Wire Missing on 2009 GMC Sierra
  • It is possible that the previous owner was not aware of the tow package wiring and connections that need to be made under the hood of your 2009 GMC Sierra. The tow package power wire under the dash essentially goes directly under the hood over by the power distribution box. If it is present then it might be there off to one side. If not then there is no reason why you can't run your own wire from the brake controller to the positive post that the factory wire would normally attach to....
    view full answer...

  • Troubleshooting Ground Wires Getting Hot On Tilting Snowmobile Trailer
  • If the ground wires and pins are getting hot, it sounds like either they are not a ground or there is probably a short somewhere in the wiring you will need to find. First you want to check the trailer wiring to make sure the wire coming from the ground pin is attached to a clean bare metal surface. Check the vehicle plug with a circuit tester like part # 40376 and make sure it is not getting a feed from the vehicle. Check for corrosion on any of the pins and make sure there are...
    view full answer...

  • Recommendation for Power When Not Hooked Up to Vehicle
  • I can help you with lighting up your enclosed trailer. First you would want to get an auxiliary battery. Next we would want to run all the interior lights power wires to a switch, like the Pollack # PK34513, using a 10 or 12 gauge wire, like Deka's # 10-1-1, ending the wire at the battery's positive terminal. To connect them to the power wire you will need to use quick splices # 562 and butt connectors # 05732-2 and a ring terminals # DW05741-1 on the end, we have all these on our...
    view full answer...

  • Why Do Trailer Lights Flicker When Hitting Bumps
  • In order to fix the issue with your lights flickering you will want to pick a good spot on the trailer frame near the coupler and then run a ground wire from each of the lights as well as the trailer connector to this point. If you need to extend the wires you can use part # DW02359-1 and part # DW05744-5. Once you find a good ground point, sand the surface down, twist the wires together after you have removed part of the jacket, and then attach it to the sanded surface with part # DW05741-1...
    view full answer...

  • Where Should Ground from 7-Way Connector be Installed
  • You will simply want to connect your Ground wire to a clean, bare-metal surface on your vehicle. This can be done with a ring terminal like part # DW05740-1, which has a 1/4" ID, or part # DW05741-1, which has a 3/8" ID. i have attached a video of our Universal Installation Kit # ETBC7 being installed on a 2012 Ford Van where you can see this being done at the 2:00 mark.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Jackie C
Written by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924