1. Accessories and Parts
  2. Deka
  3. Wiring
  4. Wire
  5. Jacketed Wire
  6. 16 Gauge
Deka Wire - Jacketed 4-Wire - 16/4 Gauge - per Foot

Deka Wire - Jacketed 4-Wire - 16/4 Gauge - per Foot

Item # DW03240-1
lowest price pledge
Our Price: $2.62
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.07 lbs
Quantity: 
In Stock
Accessories and Parts DW03240-1 - 16 Gauge - Deka
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Four 16-gauge general-purpose primary wires in a PVC jacket. For use in truck, bus, tractor, light-duty boats, and general service applications. Heavy-duty compact cable protects insulated conductors against weathering, chemicals, and abrasion. Call 800-298-1624 to order Deka accessories and parts part number DW03240-1 or order online at etrailer.com. Free expert support on all Deka products. Guaranteed Lowest Price and Fastest Shipping for Deka Wire - Jacketed 4-Wire - 16/4 Gauge - per Foot. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (72)
  • Q & A (14)
  • Videos (1)
  • Photos
  • Why etrailer?

Deka Accessories and Parts - DW03240-1

  • Wiring
  • Wire
  • Jacketed Wire
  • Deka
  • 16 Gauge
  • 4 Wire

Four 16-gauge general-purpose primary wires in a PVC jacket. For use in truck, bus, tractor, light-duty boats, and general service applications. Heavy-duty compact cable protects insulated conductors against weathering, chemicals, and abrasion.


Features:

  • Used in truck, bus, tractor, light-duty boats, and general service applications
  • Manufactured to SAE and ATA specifications
  • Stranded copper wire to maintain flexibility
  • Insulated in high-quality gray PVC jacket to protect against weathering, chemicals, and abrasion
  • Color-coded conductors to enable easy identification
  • RoHS compliant non-lead construction


Specs:

  • Voltage: 60 volts or less
  • Temperature: -22 F (-30 C) to 221 F (105 C)
  • Gauge: 16
  • Stranding: 19/29
  • Nominal outer diameter of entire cable: 0.185" x 0.500"
  • Quantity: 1'
  • 1-Year limited warranty


03240 Deka Wire - Jacketed 4 Wire - 16/4 Gauge - per Foot





Video of Deka Wire - Jacketed 4-Wire - 16/4 Gauge - per Foot

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Deka Wiring DW03240-1 Review

Today we're going to review part number DW03240-1. This is the Deka 4-Wire Jacketed Wire 16-Gauge size and this part number is per foot. Now this wire is used in truck, bus, tractor, light-duty boats and even general service applications. It is manufactured to SAE and ATA specifications. The wire is a stranded copper wire to maintain flexibility. If you noticed all 4 wires are insulated in this high-quality, gray PVC jacket and this protects against weathering, chemicals, and abrasion. The wires, as you can see, are color-coded conductors to enable easy identification.

It's black, red, green, and white. This wire is RoHS compliant non-lead construction. The specs on this, the voltage it can take is 60 volts or less. Temperature is negative 22 degrees Fahrenheit up to 221 degrees Fahrenheit. Again, the size on the wire is 16-gauge.

Again, the quantity for this part number is for 1 foot so you can order it per foot however many feet you would like. That should do it for the review on part number DW03240-1. The Deka 4-Wire Jacketed Wire 16-Gauge size and it's per foot. .


Customer Reviews

Deka Wire - Jacketed 4-Wire - 16/4 Gauge - per Foot - DW03240-1

Average Customer Rating:  4.7 out of 5 stars   (72 Customer Reviews)

Four 16-gauge general-purpose primary wires in a PVC jacket. For use in truck, bus, tractor, light-duty boats, and general service applications. Heavy-duty compact cable protects insulated conductors against weathering, chemicals, and abrasion.

- DW03240-1
by:

This wire exactly what I need to wire my Jeep from front to back so I can have lights from my RV to my kayak rack. It is protected with an outside cover unlike the regular four flat. It is also all copper not copper clad aluminum like many other sellers have. Price is very good.


Comments
Still works great. Have had no problem with the wire.
Mike H - 03/13/2021


- DW03240-1
by:

I rewired my light bar for my boat trailer with the items I purchased. Before I built the the light bar, every time I used my boat trailer I would waste valuable sailing or fishing time repairing faulty lights. The do not last long when you submerge them in salt water. This light bar now version 3.0 have given little trouble over the years



- DW03240-1
by:

Taillight lights, light when the nightlight is AllRrighty!!!



- DW03240-1
by:

I bought wiring and connectors to rewire a 30+ year old utility trailer. All items purchased were of excellent quality and the trailer lights work well. I was especially pleased with the jacketed 4 conductor wiring.



- DW03240-1
by:

For a great price, you are getting quality. I use trailer lights every day at work. I'm hooking and unhooking multiple times per day with exposure to wind, rain and snow. 4-way wires typically are glued together and so you get less protection from rips and breaks than the jacketed wire here. A lot of trailers come with cheap wiring like that. If you are re-wiring your trailer, do it once with this wire.



- DW03240-1
by:

Etrailer, is the place to go with their large inventory of towing, trailer and vehicle accessories. Attentive ordering process and quality of products. Very good asset for my farming operation.



- DW03240-1
by:

Perfect for replacement trailer wiring on any trailer. The added covering helps keeps wiring sealed and protected. Worked perfect with heat shrink sealed connectors to stop future corrosion of wires.



- DW03240-1
by:

It has been over a year since I had rebuilt my trailers using parts purchased at etrailer. This is the first time that I have been able to put any real miles on the unit and with 800+ miles the lights and everything performed flawlessly. I will not think twice of making additional purchases from etrailer.



- DW03240-1
by:

Works as installed after 1 year. Outer PVC jacket is very smooth, aiding installation into PVC conduit. I wire all heavy duty trailers with conduit to protect the wires.



- DW03240-1
by:

I was a bit disappointed in the wire cable which appeared to be round on your website. I was expecting it to be round so as to go through the various holes and clips on my trailer and it is flat. It'll work fine but will not look quite as sanitary as I had planned.



- DW03240-1
by:

It would be difficult , if not impossible, to have a more helpful person facilitating the placing of an order than Paula at etrailer. I swapped out all incandescent light fixtures on my trailer with led, and the buyiing/ selection process was made a pleasure with her help.



- DW03240-1
by:

quality wiring and the sheath is very robust providing good protection of the wires inside. If I ever need more I wouldn't hesitate to buy this product again.


Comments
getting the job done hassle free
Darren K - 07/01/2019



- DW03240-1
by:

Although I was at first apprehensive in placing my first order due to the website not working correctly for a PayPal payment, then not appearing to work for a credit card payment, a call to eTrailer confirmed that my order had been received after all. From that point on, the transaction was fast and flawless. Parts were shipped and received quickly, and were exactly as advertised. The extra length of trailer light wire was much appreciated. I will be a repeat customer.


Comments
A year along the eTrailer products are working like new. Great products and service.
Gene S - 10/01/2015



- DW03240-1
by:

Great trailer wiring! The jacket helps protect the wires and they are easy to separate in order to put on terminals. Too cold here to install but a warm spell is coming this weekend. I'll move the trailer into the garage and have a go.


Comments
I install the wiring and it has been going for a year now. Good tough wire.
Bob C - 12/20/2017



- DW03240-1
by:

Ordered 12 Ga jacketed two wire (brake wire) and 16 Ga bonded four wire to rewire my 18' tandem axle trailer. Good high quality wire and arrived in very short time due to fast shipping from etrailer.com. Highly recommend this company.



- DW03240-1
by:

We bought the multi conductor cable to replace the pendant cord on an motorized cable hoist, that was too short. It was the only product that met our needs, for the application. I has worked out fine since we installed it, great product. Tommy



- DW03240-1
by:

All of your products were of very good quality and fit perfectly the first time. Thank you for being genuine. I especially appreciate you selling Dutton Lainson products, as I grew up in Hastings, NE. They are a very good manufacturer.



- DW03240-1
by:

Love the flat design that facilitates making the connection to the vehicle inside the vehicle that much more convenient. Would be better if the color coding was black, brown, yellow, and green to match the flat four wire that is the standard with most trailer light kits.



- DW03240-1
by:

Fenders were uniform and nicely formed



- DW03240-1
by:

Great product for rewiring my dump trailer. The protective jacket is great for lighting cable on a dump trailer.



- DW03240-1
by:

Used this wire to install LED brake lights and backup lights on my RV. Works perfect and looks clean.



- DW03240-1
by:

Used this to run power up to a push bar from my center console switch box to control several different LED lights. Very flexible and I enjoyed the flat design to run under carpet & trim easier.



- DW03240-1
by:

best product for flexible four-conductor wire for conventional trailers. Thanks for stocking and prompt delivery!



- DW03240-1
by:

Very flexible and easy to run through conduit. Used on several different trailers, from boat to dual axle flatbed.



- DW03240-1
by:

Nice heavy jacketed wire. As with the rest of the order, it arrived in short order.


Comments
I ordered a number of products that Im finally incorporating into a major restoration. The wire is nice, especially after hearning the neighbors horror story about cheap imported wire gone bad.
Bob G - 10/12/2017


26
73
Show More Reviews

Ask the Experts about this Deka Accessories and Parts

  • How to Test Tekonsha Primus IQ Brake Controller that Stopped Working
    Testing the brake controller is fairly easy. Sever the blue brake output wire near the brake controller leaving enough room to reconnect it and then apply the manual slide. Using a circuit tester like the Quickee Tester, part # PTW2993, you should get output to the controller side of the wire you severed. If the manual slide activates the trailer brake output wire properly, try the brake pedal. If the brake pedal activates the brake output properly also then the problem is farther back...
    view full answer...
  • Wire Color/Function of Tekonsha Primus Brake Controller to Install on 2013 F150 w/ OEM Pigtail
    It sounds like you are asking about the OEM brake control harness for your 2013 F150. The color and function of the wires exiting the rear of the controller are as follows: Blue-Output to Trailer Brakes White-Ground Red-Stoplight Switch Connection Black-12-Volt Power Supply Ford offered two different OEM pigtails over the years, one with a Pink wire for 12-volt power, Red wire for stoplight switch, White is ground and Blue for output to brakes. Some pigtails had a brown wire that...
    view full answer...
    Image 1 for
  • Wire Gauge Wire is Used on Tekonsha Primus IQ Brake Controller
    The Tekonsha Primus IQ Trailer Brake Controller # TK90160 referenced in your question uses 10 gauge wire for the 12V (black) and brake output (blue) wires and 12 gauge wire for the brake switch (red) and ground (white) wires. This is the case with all Tekonsha brand brake controllers.
    view full answer...
  • Installing Trailer Connector on RV for Towing Trailer
    I'm assuming you're wanting to know how to wire your RV to tow a trailer, is that correct? This will depend on which trailer connector your trailer uses. If the trailer uses a simple 4-pole connector like part # 18004, you would install a 4-pole on the RV. If your RV uses a separate bulb behind an amber colored lens for the turn signals, you'll need to use a 4-pole with a converter, like part # 119147KIT. If your RV uses the same bulb for brake lights and turn signals, with a red...
    view full answer...
  • Atwood Air Command Ducted Unit Wiring for Thermostat Connection
    The Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump - 13.9 Amp - 15,000 Btu - Ducted - White # AT15028-22 comes with the extension cable you are seeking but it is not available as a separate part. The only kit we have that includes it is the Replacement Vent, Wall-Mount Thermostat, and Remote for Air Command RV Air Conditioner - Ducted # AT15022. You may want to consider splicing in wire like the Deka Wire - Jacketed 4-Wire - 16/4 Gauge - per Foot # DW03240-1 if you don't...
    view full answer...
  • Availability of 18/6 Wire in Rubber Cable
    The only 18 gauge wiring we have available is the Deka Bonded 3 Wire # DW02923-1, which is sold by the foot. This 3-wire bonded parallel wire has 16/30 stranding with a maximum voltage of 60V. If you are able to go a bit thicker we do also have the Deka 16/4 Gauge Wire # DW03240-1, which features four 16-gauge wires fully coated in a PVC jacket. This wire is also sold by the foot. I have attached a short video review that you can check out as well.
    view full answer...
  • 16 Gauge Wiring Options for the Hopkins Replacement Endurance 4-Way Trailer Connector
    While it is possible this may work, I did contact Hopkins who confirmed this Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector # HM48192 is designed for use with 16 or 18-gauge, not the 14-gauge of the Wesbar 4-Pole Flat Connector w/ Jacketed Cable # W787274. They did not recommend this approach of stripping wires to make it fit. The Hopkins Endurance Quick-Fix Replacement is not a great long term solution but with the appropriate length of Deka Wire - Jacketed...
    view full answer...
  • Troubleshooting Trailer Wiring For Double Towing Camper and Motorcycle Trailer Behind 2016 Tundra
    It sounds like you want to tow 2 trailers and need the wiring for both. It is completely possible to do that as long as your truck can handle the total weight of the two loaded trailers. For the wiring, there are a couple of different options. You can run an extremely long harness like you mentioned that will be a simple customized length or you can tap into your trailer wires to create a harness at the back of your camping trailer. My recommendation is to do the latter. To...
    view full answer...
  • Is there an Extension Cable for Replacement Digital Wall-Mounted Thermostat # AT15029
    I did some checking but could not find an extension cable for Replacement Digital Wall-Mounted Thermostat # AT15029. The wiring would have to be extended the old fashioned way; by splicing in wires. I recommend using jacketed wire # DW03240-1 and butt connectors # 05731-5. The jacket will help protect the wires when you are performing the installation. This wire bundle is sold by the foot so for 20 feet change the quantity to 20.
    view full answer...
  • Options for 16 Gauge Wire to Power a 12 Volt Spot Sprayer in Bed of 2012 Ford F-150
    We carry different types of 16 gauge wire. We have bonded 4-Wire, # 16-4B-1, jacketed 4 wire, # DW03240-1, bonded 3-Wire, # 16-3B-1, and single wire # 16-1-1. Each of these are available in increments of 1 foot. So if you needed 8 feet you would enter 8 in the quantity box for an 8 foot length of wire. I would over estimate it because it is better to have too much wire than not enough. You also might be interested in some heat shrink tubing # DW05744-10 to keep the splices water tight.
    view full answer...
  • Recommended LED Tail Lights For 2017 Alto Safari Camper Trailer
    I understand why you want to add additional lights on your camping trailer. I recommend part # STL78RB. This is an oval 6-1/2 inch LED light with the stop, turn, and tail light function. LED lights require much less power than incandescent lights. These are surface mount lights that have an overall measurement of 7-9/16 inches long, 3-5/16 inches wide, and 3/4 inches deep. This is a three-wire light. The wires have the following functions: Red for turn signal and brake, Black is for...
    view full answer...
  • Is There a 4-Pole Female Wiring Connector Like the 3-Pole Bulldog Winch
    The Bulldog Winch plug you referenced, part # BDW20178A, is specifically for their winches and we don't have a 4 pole version of it. If you're looking for a 4-pole trailer female connector you can use part # PK11402 which doesn't have the wire leads on it but you can add as much of part # DW03240-1 as you need since it's sold by the foot.
    view full answer...
  • Wiring to Connect 5-Flat on Trailer and 4-Round on Boat to 5-Flat on Tow Vehicle
    Although we do not carry a wiring harness/adapter that will allow you to split the 5-flat on your tow vehicle to allow you to connect to both the 5-flat on the trailer and the 4-round on the boat, I have a solution for you. You will need the RoadMaster 4-Wire Connectors, # RM-910030-4, Jacketed 4-Wire (sold by the foot), # DW03240-1, and the Deka Heat Shrink Butt Connectors, # DW05745-5. I recommend that you splice into the wiring, behind the 5-flat on your trailer, in order to add...
    view full answer...
  • Recommmended 4-Way Flat Trailer Wiring for Cargo Carrier Light Strip on Travel Trailer
    My recommendation for your application is to add a junction box like # 3375601101 which will allow you to connect another wire without "splicing in" on the trailer side and run wiring like # DW03240-1 for a longer run or # 16-4B-1 to the rear of your trailer and then use # HM48190.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Written by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.