Female Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - Qty 1

Female Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - Qty 1

Item # DW01899-1

lowest price pledge

Our Price: $0.67

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.04 lbs

Quantity: 
In Stock, Ships Today
Deka Quick Disconnects Accessories and Parts - DW01899-1
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Wiring
  • Wire Connectors
  • Quick Disconnects
  • Deka
  • 16-14 Gauge
Easily disconnect your vehicle wiring using this quick-disconnect. Fits 16-14 gauge wire. Female tab is 0.25" wide x 0.032" thick. Fully-insulated PVC plastic is resistant to vibration and entry of water or other contaminants. Call 800-298-8924 to order Deka accessories and parts part number DW01899-1 or order online at etrailer.com. Free expert support on all Deka products. Guaranteed Lowest Price and Fastest Shipping for Female Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - Qty 1. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (2)
  • Q & A (14)
  • Photos
  • Why etrailer?

Deka Accessories and Parts - DW01899-1

Easily disconnect your vehicle wiring using this quick-disconnect. Fits 16-14 gauge wire. Female tab is 0.25" wide x 0.032" thick. Fully-insulated PVC plastic is resistant to vibration and entry of water or other contaminants.


Features:

  • Easily disconnect your vehicle wiring
  • Female tab wiring quick-disconnect
  • Fully-insulated PVC plastic resists vibration and entry of water or other contaminants
  • Blue


Specs:

  • Fits 16-14 gauge wire
  • Works with male spade terminal wiring quick-disconnect (DW01896-1 - sold separately)
  • Dimensions: 0.25" wide x 0.032" thick
  • Quantity: 1
  • Made in the USA


01899 Female Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - 0.25 Inch x 0.032 Inch - Qty 1








Customer Reviews

Female Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - Qty 1 - DW01899-1

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Easily disconnect your vehicle wiring using this quick-disconnect. Fits 16-14 gauge wire. Female tab is 0.25" wide x 0.032" thick. Fully-insulated PVC plastic is resistant to vibration and entry of water or other contaminants.

- DW01899-1
by:

Worked perfectly for me... great communication on delivery from the etrailer folks 553090



- DW01899-1
by:

I ordered these products on a Sunday afternoon and was notified the order had shipped that evening. I expected to receive the order in eight days but it arrived in three days. I was also able to track the progress of the shipment as it made its way to my location. There was no disappointment in the quality of the products. I intend to continue to order from eTrailer in the future. 158752


2
2

Ask the Experts about this Deka Accessories and Parts
Do you have a question about this Accessories and Part?


  • Recommended Trailer Hitch Receiver for 2013 Audi Q7
  • For your 2013 Audi Q7, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75950 over the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13220 because it requires a stability strap # 18050 for any non-trailer loads like bike racks and cargo carriers. The attached installation details do not state trimming is required for your model vehicle. If you will be towing or using a lighted accessory, I recommend the Curt Powered Tail Light...
    view full answer...

  • How to Install the On/Off Switch Panel for Atwood Gas and Electric Water Heaters Part # AT91230
  • I have attached the wiring diagram for the Replacement Double-Panel On/Off Switch for Atwood Gas and Electric Combination Water Heaters part # AT91230. The installation will be very simply with only 5 connections needed. There will be three terminals that go to the water heater (orange, blue, white), one terminal that goes to a 12 volt power source, and one terminal that goes to a ground. In order to make these connections I recommend using four of the Female Spade Terminal Quick-Disconnect...
    view full answer...

  • Can In/Out LED Rocker Switch be Used for any Winch
  • You should be able to use the In/Out LED Rocker Switch For Bulldog Winch # BDW20261 for your winch. If you take a look at the linked video you can see this switch being installed if you forward to about the 10:00 mark. You do need to make sure it is wired correctly and I have added the diagram Bulldog has provided to help. It is grainy but says 1: Winch Power Out, 2: Power 12V, 3: Winch Power In, 7: Ground. You will need to use Primary Wire - 16-Gauge # 16-1-1 and Spade Terminals #...
    view full answer...

  • Recommended Wiring Connectors To Avoid Soldering with Replacement Switch for Husky Brute Jack
  • If you don't wish to solder the wires onto your Replacement Operating Switch # HT87452, you can use the Female Spade Terminal Quick-Disconnects like # DW01899-1 to give you quick connections you can crimp onto the wires.
    view full answer...

  • Components Needed to Extend Length of Wiring That Powers Ventline Powered Vent Fan
  • To extend the length of the wiring that powers your Ventline vent fan you can use 2 of part # DW01899-1, which is a Female Spade Terminal Quick-Disconnect, 2 butt connectors # DW05714 and a suitable length of 2-conductor wire such as # 12-2-1 (which is sold by the foot). The wiring portion of part # BVD0218-00 is not sold by itself.
    view full answer...

  • How To Attach Reverse Light Wiring For Putco Universal LED Tailgate Light Bar On 2017 Toyota Tundra
  • The Putco Blade Universal LED Tailgate Light Bar # P92009-60 does plug into your 4-way trailer connector on your 2017 Tundra. That will take care of the stop, tail, and turn signals for the light bar. To get the backup lights working you will need to attach the White wire to the reverse light circuit on your Tundra. You can use the quick-disconnects like part # DW01899-1 and part # DW01896-1 for the reverse light wire. For 16 gauge wire you can use part # DW02359-1. This is sold...
    view full answer...

  • Installation of Dual Switch on Suburban Brand Water Heater
  • You can absolutely install a double switch like the Replacement Double-Panel On/Off Switch for Atwood Gas and Electric Combination Water Heaters - White # AT91230 on your Suburban Water Heater. This switch when wired correctly will allow you to power the gas burner and electric components independently. I've attached a wiring diagram to assist. You may want to use the Female Spade Terminal Quick-Disconnect # DW01899-1, butt connectors # DW05743-5, and Deka Ring Terminals # DW05737-1.
    view full answer...

  • How to Turn Off Back-Up Alarm of Curt C57100 When Not Towing
  • Once the Curt # C57100 is installed, the alarm will sound every time you put the transmission in reverse, regardless of whether or not you're towing at the time. The only way I can think of to defeat the alarm for when you're not towing would be to install a switch like # PK34308 inline on the wire feeding the reverse lamp circuit to the # C57100. You'd need to peel back the tape or wire loom that covers the factory wiring harness the C57100 plugs into. Use a circuit tester like...
    view full answer...

  • How to Use the Vision X Headlight Conversion Kit Part # VX-46 on a 1986 Ford F-Series Truck
  • The Vision X Headlight Conversion Kit part # VX-46 is a headlight housing and does not come with the headlight bulb. You can add the headlight bulbs to this housing using part # VX-L9007. You would need cut off your existing headlight bulbs pigtail and wire it to the harness included with the housing using part # DW01899-1. You will need 6 of the spade terminals in order to wire the new harness. If your 1986 Ford F-Series truck uses a 9007 headlight bulb then you will not need to use...
    view full answer...

  • Replacement Headlight Housings and Bulbs for 1996 Pontiac Trans Am
  • As long as your 1996 Pontiac Trans Am features 4 inch x 6 inch rectangular sealed lights, the Vision X Headlight Conversion Kit # VX-46 that you were looking at should work well as a replacement. These housings do not come with the needed 9007 bulb but it can be added with # VX-L9007. You will just need to cut off your existing headlight bulbs pigtail and wire it to the harness included with the housing using some quick-disconnects like # DW01899-1. These halogen lights feature multi-surface...
    view full answer...

  • Is There a Class II Trailer Hitch Receiver Available for a 2008 Chrysler Sebring Convertible
  • The only trailer hitch receiver option for your 2008 Chrysler Sebring Convertible is the Draw-Tite Sportframe # 24871, which is only a Class I hitch. Due to the design of your Sebring, there are no Class II options available. This trailer hitch has a Gross Trailer Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. I checked an online version of a manual for you Sebring and if had the same weight capacities that this hitch has, but you will want to check your copy of the owner's...
    view full answer...

  • Availability of Wiring Splitter to Connect 2-Pin Lighted Hitch Cover to Brake Light Circuit
  • It sounds like you have a lighted hitch cover that features a 2-pin connector that is designed to plug right into a 4-Way on the vehicle, similar to the plug end of the GMC # CR-007G. We do not currently have a splitter available that will plug into this harness and provide you with a single 12V lead wire. If you don't want to or cannot plug into a 4-Way on your Sienna, your best option may be to simply cut off the plug end and use some Quick-Disconnect Spade Terminals like # DW01899-1...
    view full answer...

  • Locating Brake Stop Lamp Signal to Install Brake Controller on 1998 Chevy C/K Series Pickup
  • You wouldn't be able to access the brake lamp signal at the trailer connector because the right turn and left turn lamp circuit also carries the brake lamp circuit. This could cause the trailer brakes to apply when you use the turn signals. The brake switch is very hard to access in these trucks, because of the under dash bracing that's in the way. You have two options. You can access the brake signal from the circuit feeding the third brake lamp, or you can try to access it at the junction...
    view full answer...

  • Will the Universal-Design Rocker Switch With Dual Actuators Install In a Standard Switch Cutout
  • The Universal-Design Rocker Switch part # PK34312 is a dual actuated switch that gets installed in a 0.830" wide x 1.450" tall cutout which is a very common size. Therefore, yes the above will install inside a standard 12 volt rocker switch cutout. For reference, the Universal-Design Rocker Switch part # PK34360 is a single actuated switch that gets installed in the same 0.830" wide x 1.450" tall cutout as the above. The Female Spade Terminal Quick-Disconnect part # DW01899-1 is what...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Laura H
Updated by:
Sarah W
Photos by:
Stacy F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.