View Cart
16-Gauge Bonded 3 Wire - per foot

16-Gauge Bonded 3 Wire - per foot

Item # 16-3B-1

lowest price pledge

Our Price: $0.88

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.04 lbs

Quantity: 
In Stock, Ships Today
Deka 16 Gauge Accessories and Parts - 16-3B-1
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Wiring
  • Wire
  • Bonded Wire
  • Deka
  • 16 Gauge
  • 3 Wire
Parallel primary wire has 3 parallel conductors bonded together with thermoplastic insulation. Meets SAE J1128 specifications. For use with 50 volts or less. Each wire is 16-gauge. Each conductor is independently color coded for easy identification. Call 800-298-8924 to order Deka accessories and parts part number 16-3B-1 or order online at etrailer.com. Free expert support on all Deka products. Guaranteed Lowest Price and Fastest Shipping for 16-Gauge Bonded 3 Wire - per foot. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (26)
  • Q & A (11)
  • Videos (1)
  • Photos
  • Why etrailer?

Deka Accessories and Parts - 16-3B-1

Parallel primary wire has 3 parallel conductors bonded together with thermoplastic insulation. Meets SAE J1128 specifications. For use with 50 volts or less. Each wire is 16-gauge. Each conductor is independently color coded for easy identification.


Features:

  • 3-Wire bonded parallel wire
  • Thermoplastic insulation is color coded for identification purposes
  • Ideal for use in RVs, marine, and utility trailer applications
  • Built to stay together under the toughest operating conditions
    • Easy to separate at the end of a run for final terminal connection
  • All-copper stranded core is highly conductive
    • Maximizes current transfer
    • Remaining flexible for easy installation
  • Meets SAE J1128 specifications
  • Brown, yellow, and green wires


Specs:

  • Rated at 50 volts or less
  • 16-Gauge wires
  • Quantity: 1 foot


02914 16-Gauge Bonded 3 Wire - per foot







Video of 16-Gauge Bonded 3 Wire - per foot


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Deka Wiring 16-3B-1 Review

Today we're going to review part number 16-3B-1. This is Deka Bonded 3 Wire sold per foot. This is a parallel primary wire that has the 3 parallel conductors. They're all bonded together using this thermoplastic insulation. Each conductor is independently color coded for easy identification. This is designed for use with 50 volts or less.

Each wire is a 16-gauge size. Again, the price on this part number is per foot of wire. You can order as many feet as you'd like. Basically, you can see it's a near-normal wire color. This is the green which is normally used for your right turn and brake signal; your yellow which is used for your left turn and brake signal; and, your brown which is used for your tail lights. This normally used when you have a separate ground wire run separately. That should do it for the review on part number 16-3B-1.

This is the Deka Bonded 3 Wire sold per foot. .


Customer Reviews

16-Gauge Bonded 3 Wire - per foot - 16-3B-1

Average Customer Rating:  4.8 out of 5 stars   (26 Customer Reviews)

Parallel primary wire has 3 parallel conductors bonded together with thermoplastic insulation. Meets SAE J1128 specifications. For use with 50 volts or less. Each wire is 16-gauge. Each conductor is independently color coded for easy identification.

- 16-3B-1
by:

Just what u need to wire up a trailor. I know copper prices are high. But thought 51 cents a foot. Was probly about right. 116272



- 16-3B-1
by:

Replaced the wiring harness, all lights and even added an interior lamp. I found everything I needed in one place. Thanks! (that's a 1958 Parkhurst trailer) 435571



- 16-3B-1
by:

Good prices, geat selection, fast shipp ing. 628024



- 16-3B-1
by:

other then some wrong seals things have been great, i did need some tire and wheels for a trailer and found them cheaper some were else thanks 625408



- 16-3B-1
by:

Still working great after a year! Would buy again 594624



- 16-3B-1
by:

Quality piece, just what we needed. The video was very helpful & appreciated, Thanks. 557127



- 16-3B-1
by:

I built my recovery trailer built, than ks 519599



- 16-3B-1
by:

This is the only place I could find bulk wire to rewire the lights on my 25ft gooseneck flatbed trailer. It worked great! 457601



- 16-3B-1
by:

Excellent product. Easy to use and inst all. 442810



- 16-3B-1
by:

Just what I needed and super fast shipp ing! 435124



- 16-3B-1
by:

It's been a long while since I've ordered anything from etrailer, but, as usual, you folks came through in flying colors. The package was boxed well, shipped on time and the correct products, that's a real plus in today's internet shopping zone. 424387



- 16-3B-1
by:

Excellent wire, couldnt beat the price anywhere else. Rewired my entire trailer with it. 399832



- 16-3B-1
by:

No shorts or problems in wiring. 349554



- 16-3B-1
by:

I ordered this to rewire lights on my 14 ft flat bed trailer. Quality was good, shipping was timely. Overall satisfied customer. 344579



- 16-3B-1
by:

great to deal with,,,quick ship,,,,,so far no backorders 303943



- 16-3B-1
by:

Good grade of wire just like you would get if you bought a wiring plug kit. 249780



- 16-3B-1
by:

WORKED WELL 247045



- 16-3B-1
by:

great wire,factory original,thank you 226406



- 16-3B-1
by:

Products were as advertised. Good quality and met my needs. Shipping was fast and I got notifications via email concerning the status of my order. Will purchase from etrailers.com again. 224234



- 16-3B-1
by:

I bought this wire to run backup lights to the rear of my 42' 5th wheel. Easy to work with and very reasonable priced. 182590



- 16-3B-1
by:

Have not installed but look like just what I wanted and needed. 178187



- 16-3B-1
by:

Great service and assistance from e-trailer. Products arrived when expected. Just what I needed to make my 18-foot utility trailer legal again with working stop, tail and turn signal lights. 145611



- 16-3B-1
by:

nice wire 115753



- 16-3B-1
by:

wire looks great, and very fast service less than 24 ours 97351



- 16-3B-1
by:

The product arrived in perfect condition when promised. 62243



- 16-3B-1
by:

good buy 57891


26
26

Ask the Experts about this Deka Accessories and Parts
Do you have a question about this Accessories and Part?


  • Installing Trailer Connector and Junction Box on 20ft Gooseneck Trailer
  • If you click on the link I've provided, you can see our Trailer Wiring FAQ article, which will show you exactly how the connector on your gooseneck trailer should be wired. I took the liberty of looking in on your order, and saw that you're using a # HM20048 wiring connector and a junction box, which is exactly what I'd recommend. I've provided a wire color code chart for the # HM20048 connector. I've also linked you to an install video for the junction box, which will show you exactly...
    view full answer...

  • Adding a Deka Jacketed 7-Wire to a Trailer
  • The jacket on Deka Wire - Jacketed 7-Wire # DW04914-1 is going to provide an extra layer of protection for the trailer wiring. You might consider moving the junction box as far back on the trailer as possible. This way the bulk of your wiring will be jacketed and protected. Personally, I'd install the junction box toward the front of the trailer, running the Hopkins molded trailer connector right into it. From the junction box, run the 3-wire bonded wire # 16-3B-1 for the lighting circuits...
    view full answer...

  • Changing Idler Hubs on Small 5x8 Trailer to Electric Brakes
  • With a smaller trailer like you describe, electric brakes would be my recommendation both from a cost standpoint as well as the ease of installation. For the trailer, you would need two hub/drum assemblies and two brake assemblies. To determine if the hub/drum assemblies we offer are compatible with your trailer spindles, you will need to pull one of your idler hubs off, and look at the inner and outer bearing numbers. The hubs we offer, part # AKHD-545-35-K use # L68149 inner bearings...
    view full answer...

  • Amperage Draw of Optronics Sealed Mini LED Side Marker Lamp # MCL13A2B
  • The Optronics # MCL13A2B Sealed Mini LED Side Marker lamp draws 0.046 amps at 12.8 volts. I'd recommend using 16-18 gauge wire for your trailer lighting circuits. If you're rewiring your trailer, we carry a bonded 3-wire, part # 16-3B-1 which is sold by the foot. I'll link you to our help article about trailer wiring, which I hope you'll find helpful.
    view full answer...

  • Replacing Lights and Trailer Connector on Boat Trailer Over 80 Inches Wide
  • Although there isn't a specific kit available that addresses all your needs, you can use a light kit designed for an over 80 inch trailer like # TLL36RK and modify it so it will work. You'd need some extra wire, # 16-3B-1, an ID light bar for the middle of the rear beam that would tie into the running light circuit, part # MCL70RB, a molded trailer connector, part # H20046 and a junction box, part # 38656. The install would be pretty straightforward. The molded connector would run to...
    view full answer...

  • Recommended Breakaway Kit and Complete Wiring for 2002 WW 3 Horse Trailer
  • For your 2002 WW 3 horse trailer, I recommend the Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long # 277-000141 along with ring terminals like # 44-5310A for easy connection. For your light wiring, I recommend using the 16-Gauge Bonded 3 Wire - per foot # 16-3B-1 on each side for your ground, running light, and turn/stop functions. For your trailer brakes I recommend the # 10-2-1. You will want butt connectors like # 05731-5 and # 05732-2. For your breakaway system,...
    view full answer...

  • Parts Needed to Add LED Reverse Lights to an ATV Trailer
  • Led light # BUL72CB is not certified as use as a backup light. For an LED light that is designed for use as a backup use # BUL10CB. You will also need grommet # a70gb and wiring pigtail # A49PB. For wire you can use # 16-3B-1 sold in 1 foot increments. You will need to wire in the power wire to the reverse light circuit on the 7-Way. For the lights to work you have to have a functioning reverse light circuit on the vehicle side 7-Way.
    view full answer...

  • Options for 16 Gauge Wire to Power a 12 Volt Spot Sprayer in Bed of 2012 Ford F-150
  • We carry different types of 16 gauge wire. We have bonded 4-Wire, # 16-4B-1, jacketed 4 wire, # DW03240-1, bonded 3-Wire, # 16-3B-1, and single wire # 16-1-1. Each of these are available in increments of 1 foot. So if you needed 8 feet you would enter 8 in the quantity box for an 8 foot length of wire. I would over estimate it because it is better to have too much wire than not enough. You also might be interested in some heat shrink tubing # DW05744-10 to keep the splices water tight.
    view full answer...

  • Wire a Trailer for Electric Drum Brakes
  • The normal color wire for electric trailer brakes is blue. It sounds like you are using regular tail light wiring, which would not be sufficient size for trailer brakes. Yellow/brown and green/brown to me sounds like parts of a wishbone harness. A wishbone harness has 2 running light wires instead of one so you don't have to run a jumper wire from one side of the trailer to the other. An example of this type of harness is # A35W42B. The yellow wire would be for left turn signal/brake...
    view full answer...

  • Recommendation For Brake Controller on 1968 Chevrolet C50 Truck
  • Our best selling brake controller will be the Tekonsha Prodigy P2 Brake Controller, part # 90885. It is a proportional brake controller which means that the brakes are applied to the trailer at the same time and same strength as the brakes on your vehicle. I am including links to the installation instructions on the Prodigy P2 brake controller. You will need to hard-wire a 7-Way connector on your 1968 Chevrolet C50 truck to install the Prodigy brake controller. If you have a 4-Way connector...
    view full answer...

  • Availability of Replacement Trailer Wiring for Car Hauler
  • We don't offer a once piece harness, but I can recommend what you'd need to wire your trailer. I'd recommend using a 7-way connector, like # H20046. Keep in mind that the connector uses a different wire color code than usual. You'll find the color code on the product page I've linked for you. I'd then recommend you terminate the wiring from the connector in a junction box like part # 38656. Using a junction box makes for a neat and weatherproof installation. Use bonded 3 wire, part #...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Sam P
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924