Hitch Ball Bushing - 1-1/4" to 1" - Zinc

Hitch Ball Bushing - 1-1/4" to 1" - Zinc

Item # F-2

lowest price pledge

Retail:$18.78

Our Price: $3.38

You Save: 82%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.08 lbs

Quantity: 
In Stock, Ships Today
Accessories and Parts F-2 - Bushing - Curt
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Videos


  • Hitch Ball
  • Bushing
  • 1-1/4 Inch to 1 Inch
  • Curt
Reduce a 1-1/4" ball mount hole to accommodate a 1" hitch ball shank. Call 800-298-8924 to order Curt accessories and parts part number F-2 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Hitch Ball Bushing - 1-1/4" to 1" - Zinc. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (28)
  • Q & A (11)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Accessories and Parts - F-2

Reduce a 1-1/4" ball mount hole to accommodate a 1" hitch ball shank.


Features:

  • Hitch ball bushing reduces a 1-1/4" hitch ball hole into a 1" hitch ball hole
  • Yellow zinc finish
  • 3/4" Tall


21200 Hitch Ball Bushing - 1-1/4" to 1" - Zinc

Same as Curt C21201







Video of Hitch Ball Bushing - 1-1/4" to 1" - Zinc


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Hitch Ball F-2 Review

Speaker 1: Today we're taking a look at a hitch ball bushing. This hitch ball bushing's simply reduces a 1 1/4" diameter hitch ball hole to a 1" hitch ball hole. The reason why this is important, or the reason why this is used, is because a lot of times people have a ball mount, and then they don't have an appropriate sized hitch ball. What this does is this allows you to use the hitch ball with a 1" diameter shank on a hitch ball that has a 1 1/4" diameter hole. That's why a reducer's important, simply reduces the hole from an 1 1/4" down to 1".It's made from a durable steel construction, the zinc finishing to resist rust and the corrosion. The overall measurement edge-to-edge going this direction is about 3/4." Edge-to-edge going this direction is an 1 1/4".

Then inner edge to inner edge is 1".That's gonna do it for today's look at the hitch ball bushing or hitch ball hole reducer.


Customer Reviews

Hitch Ball Bushing - 1-1/4" to 1" - Zinc - F-2

Average Customer Rating:  4.8 out of 5 stars   (28 Customer Reviews)

Reduce a 1-1/4" ball mount hole to accommodate a 1" hitch ball shank.

- F-2
by:

Great, just what was required, that others told me was not available. 581139



- F-2
by:

I installed this in my 2018 Murano a year ago and it has worked perfectly. Was very easy to install and does its job. Thanks! 715603



- F-2
by:

Product arrived in a timely manner and just as advertised! Thanks so much!, 711650



- F-2
by:

I had traded campers and was setting up my hitch to tow my new camper and discovered I had to change the ball which had a smaller dia. shaft. Ordered this from etrailer and it arrived very quickly and was high quality. Worked just like I needed it to. 705755



- F-2
by:

Bushing reduces 1/1/4 inch hole on ball mount for 1 inch shank on 2 inch ball. Well made not cheap. Fit seemed a bit looser than I expected, but that should avoid getting stuck if I try to remove the ball. And way better than having to pound or press together. 691297



- F-2
by:

I ordered the WDH after trying towing with just a sway bar for our Honda Pilot - Airstream Sport22. Once setup the rig now tows level and is quite a bit more stable. The hitch is very well constructed and the directions were fairly easy to follow, I decided to flip the link plate even though the coupler was top mounted it was located at the bottom of the A -frame. Per the directions you will need to retorque the fasteners, I did this after a couple of short trips 10-25 miles. After an 825 mile trip only the angle set bolt needed a little more tightening. One thing to note, the hitch does include a bushing for a 1" ball shaft. 681384



- F-2
by:

Fits perfect. 549754



- F-2
by:

I bought a new hitch 16,000 lb and new ball didn't think about ball bolt diameter being smaller size so I had to order the bushing to go from a 1 1/4 " to a 1" hole so ball didn't slide a round in the hitch , put it together a used it yesterday worked great pulling the trailer no problems. 499369



- F-2
by:

Only way to adapt a 1" shank ball to 1 1/4 hitch. 497257



- F-2
by:

Great product. 490626



- F-2
by:

Works perfectly!! 441307



- F-2
by:

Yep. Just what I ordered. A bushing. 432918



- F-2
by:

It didn't fit I had to grind it down but maybe my hitch was a little smaller diameter? 405052



- F-2
by:

Perfectly fit as a replacement for a boat trailer made in the 1960's. 398095



- F-2
by:

Works fine. No problems. 387318



- F-2
by:

Ball and spacer have worked out great 363343



- F-2
by:

Simple, worked great. 359251



- F-2
by:

There is only one way to use this product and it serves it purpose well 334398



- F-2
by:

Worked great, etrailer.com was great as well! 282170



- F-2
by:

Product was exactly as ordered but was about 1/16 inch longer than the draw bar tongue thickness. I will need to grind the bushing to allow mounting the ball to the drawbar. Otherwise fine. 261951



- F-2
by:

Good price, reasonable shipping cost....simple part....all OK 237177



- F-2
by:

everything it promised to be. I had purchased a ball with 1" shaft and a ball mount with a 1 1/4" hole this was the perfect fit easy assemby 215179



- F-2
by:

Fast shipping and products were as described on the site. The convert-a ball will handy for pulling different trailers with one hitch set up. 202905



- F-2
by:

Excellent products, good price, fast se rvice. 193383



- F-2
by:

I placed my order with Vince and was completely satisfied with the experience. Simple, fast, and accurate information. 160804



- F-2
by:

products were as described, and arrived as promised, etrailers quality products and reasonable shipping charges make it one of the best values on the net. 108947



- F-2
by:

Product is exactly as described. 92742



- F-2
by:

Does what it's supposed to do....reduces the ball mount hole opening to fit the ball shank. 19700


29
29

Ask the Experts about this Curt Accessories and Parts

Do you have a question about this Accessories and Part?


  • Ball Mount with 5 Inch Rise for a Class III Trailer Hitch on a 2015 Nissan Murano
  • There are numerous ball mounts that will fit your Class III trailer hitch and that have a 5 inch rise that you can use to tow the trailer level with your 2015 Nissan Murano. Ball mount # C45014 will not work because it does not fit a Class III hitch. It is too small. I recommend # C45336. It has a 5 inch rise and is rated for 10,000 pounds gross trailer weight (limited to the capacity of the hitch or tow vehicle, whichever is lower). This ball mount has a 1-1/4 inch diameter ball hole....
    view full answer...

  • Is there a 1-7/8 Inch Trailer Hitch Ball with a 1-1/4 Inch Shank
  • Ball # 63017 is the only 1-7/8 inch diameter ball that also has a 1-1/4 inch shank. Like you said it is made to fit a pintle hitch combo ball mount. What I recommend is a ball with a 1 inch diameter shank like # 19260 and then use bushing # 58184 or # F-2 to use it in your ball mount with the 1-1/4 inch opening.
    view full answer...

  • Availability of a Ball Mount that Provides a 6 Inch Rise
  • The Draw-Tite Ball Mounts, item # 4283, does not come in a 6 inch rise configuration. At this time we do not have a ball mount with a 6 inch rise available. We do offer two ball mounts with a bit higher rise. The Convert-A-Ball Cushioned Ball Mount for 2 inch Hitches, item # AMSC6HD, has a 6-1/2 inch rise, and the Convert-A-Ball Cushioned Ball Mount, item # AMSC8, has a 6-3/4 inch rise. You could get exactly a 6 inch rise by using the Diversi-Tech Aluminum Ball Mount, item # DTBM5600,...
    view full answer...

  • Can Interchangeable Ball Set with 1 Inch Diameter Shank be Used in 1-1/4 Inch Ball Hole
  • Yes, you can use the interchangeable ball set # 105TB in a 1-1/4 inch ball hole by using a bushing such as # 58184, # C21201 or # F-2.
    view full answer...

  • How To Use A Weigh Safe Hitch Ball With 1-1/4 Shank Hole
  • Yes, the Hitch Ball Bushing part # F-2 can be used to reduce your 1-1/4" opening down to 1" so that you can use the Weigh Safe 2" Hitch Ball w/ Built-In Scale part # WSUN-2.
    view full answer...

  • 2 Inch Stainless Steel Hitch Ball with 1-1/4 Inch Shank
  • I do have options for you but we do not have exactly what you are looking for. The best option we have is the 2" Hitch Ball part # SC23-C which is made of stainless steel and has a 1" diameter shank. In order to then use this with a 1-1/4" diameter ball hole you would also need the Hitch Ball Bushing part # F-2. The Hitch Ball Bushing is zinc plated and unfortunately we don't have any that are stainless steel. We also have the Tow Ready Trailer Hitch Ball Cover part # 42250 as an alternative.
    view full answer...

  • Availability of a Trailer Hitch Ball with a 1-1/4 Inch Shank and a 1-7/8 Inch Diameter
  • The only 1-7/8 inch ball that we carry with a 1-1/4 inch shank is # 63017, but this is used for a pintle hitch combo hitch. What you can do is use a bushing like # F-2 to go from a 1-1/4 inch ball hole to a 1 inch. You could then use a ball like # 19260.
    view full answer...

  • Ball Mount with 5-1/4 Inch Rise and 1 Inch Diameter Ball Hole for a 2 Inch Trailer Hitch
  • Rise or drop doesn't have to be exact. If you can get it within 1 inch you will be just fine. We have # DTBM4600 which has a 5 inch rise and has a 1 inch diameter ball hole. Another option with the same specs is # AM3507. Or another option is to use # C45336 with bushing # F-2. The bushing acts as a spacer allowing you to use a 1 inch diameter ball shank in a 1-1/4 inch ball hole.
    view full answer...

  • Availability of Corrosion Resistant Hitch Ball Bushing
  • We do have a selection of hitch ball bushings available, such as the silver zinc Curt Hitch Ball Bushing # F-2, however these are designed specifically to reduce a particular ball mount hole to a smaller size so that it can accommodate a different sized hitch ball shank. If this is what you are needing, then this product will work great for reducing a 1-1/4 inch ball mount hole to a 1 inch hitch ball hole. The zinc finish will do an excellent job of resisting rust and corrosion. Otherwise,...
    view full answer...

  • Height of Curt Hitch Ball Bushing # F-2
  • I went out to our warehouse to take a look at the Curt Hitch Ball Bushing # F-2 referenced in your question and verified that it does feature a 3/4 inch height as indicated on the attached image. I have included a short video demonstration on this product that you can take a look at as well.
    view full answer...

  • Can Sway Control Bracket RP26003 be Used with a 2-5/16 Inch Ball
  • As long as the shank of your 2-5/16 inch ball is 1 inch it will fit sway control bracket # RP26003. Even if the ball mount you are using has a larger hole you can still use the bracket with a ball that has a 1 inch diameter shank, such as # SC30-C, by using a special bushing, # F-2, which will reduce a 1-1/4 inch ball hole down to a 1 inch.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Joshua S
Installed by:
Cole B
Test Fit:
Shane T
Updated by:
Sarah W
Updated by:
Kristina F
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924