View Cart
Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly

Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly

Item # C31009

lowest price pledge

Retail:$206.76

Our Price: $123.95

You Save: $82.81
Accessories and Parts

This item qualifies for Free Shipping

Shipping Weight: 24 lbs

Quantity: 
In Stock, Ships Today
C31009 - With Handle Curt Electric Winch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Electric Winch
  • Mounting and Installation
  • Mounting Plate
  • Curt
  • With Handle
Mount your winch to your vehicle and remove it when not in use with this winch mounting plate and handle assembly. Rugged steel plate has mounting holes for your winch and fairlead. Call 800-298-8924 to order Curt accessories and parts part number C31009 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (9)
  • Q & A (21)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Accessories and Parts - C31009

Mount your winch to your vehicle and remove it when not in use with this winch mounting plate and handle assembly. Rugged steel plate has mounting holes for your winch and fairlead.


Features:

  • Winch mounting plate with handle assembly allows you to mount your winch to your vehicle
    • Dual-purpose handles are used to transport the winch and protect it
  • Universal design supports most major winch models
    • Long shank has 3 adjustable mounting holes to accept a wide variety of winch models
    • Updated roller fairlead mounting points' design accommodates newest roller fairleads
  • Durable, black powder coat finish resists corrosion


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Line pull capacity: 9,000 lbs
  • Overall mounting plate dimensions: 13" wide x 8-1/4" deep x 1/4" thick
  • Distance between winch mounting holes (center to center):
    • Inner mounting holes: 6-1/2"
    • Outer mounting holes: 10"
  • Distance between front and rear mounting holes (center to center): 4-1/2"
  • Distance between fairlead mounting holes (center to center): 10-1/2"
  • Distance between back of mount plate to center of shank holes:
    • First hole: 4-1/2"
    • Second hole: 6-1/2"
    • Third hole: 8-1/2"


31009 Curt Trailer Hitch Electric Winch Mount with Handles

Replaces 31003







Video of Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Electric Winch C31009 Review

Today we're going to review part number C31009. This is the Curt trailer hitch electric winch mount plate with the handle assembly. This mount plate is designed to fit onto a 2" trailer hitch receiver. It does have a hollow shank with the three different holes. This will allow you to mount the shank to the position on your vehicle that will allow clearance for the winch. It is made of a durable black powder-coat finish, which will resist corrosion.

On the handles it does have two rubber-grip handles on it. The front does bend up, and it does have the roller fairlead mounting points right here. This updated design will accommodate some of the newest roller fairleads. This is a dual-purpose handle assembly. In other words, you can use it to pick it up and move it to either the front or the back of the vehicle, or to another vehicle.

And the way the handles are designed, with the handles bowed out in front of the mount plate, it will help also to protect it from any damage to the winch itself. It is a universal design, which will support most major winch models. The overall plate dimensions on this are going to be 13" long, and the width on it is going to be 8-1/4". The plate that it's made out of is a 1/4"-thick steel. I did want to mention, it does come with two sets of mounting holes on the mount plate, as you can see here.

The handles are bolted onto the outer set of four holes, and there's an inner set of four holes. They do have the standard mounting hole facing that you find on a lot of the winches. The outer holes are 10" from center to center by 4-1/2". So you can use this to mount the winch onto. If you do want to use the handles you can use that also.

The handles would mount under your winch. Now the inner set of circles, or the mounting holes, the inner second set will measure 6-1/2" center to center, you can see there, and also 4-1/2". And that is the two most common mounting hole patterns on the winches today. Now the roller fairlead mounting holes right up here, they are elongated. They will accept a 10" on-center mounting hole pattern. And the actual center to center of it is 10-1/2". Now the distance on these three holes on the shank, if you measure from this back plate, the hitch mount plate, the measurement from the mount plate to the first hole is going to be 4-1/2", to the next hole is 6-1/2", and to the last hole is 8-1/2". And that should do it for the review on part number C31009, the Curt trailer hitch electric winch mount plate with the handle assembly.


Customer Reviews

Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly - C31009

Average Customer Rating:  5.0 out of 5 stars   (9 Customer Reviews)

Mount your winch to your vehicle and remove it when not in use with this winch mounting plate and handle assembly. Rugged steel plate has mounting holes for your winch and fairlead.

- C31009
by:

The plate fit my 2018 Nissan titan perfect i just need to fit the winch on it now. 522277



- C31009
by:

The hitch is working out fine,it's what you need up in the Badlands. See Attachment as picked up on the trail Cam. I can hook it on to the rear hitch if needed also. Steve 300944


Comments

The hitch is working just fine . It is always mounted on the truck and it get a lot of recognition,folks are impressed that I can operate the winch both front the front as well as the rear of the truck.

Steve - 10/17/2017

29409

- C31009
by:

I love this trailer hitch winch mount. Easy on and easy off. I slipped it on for a couple of days for the recent ice storm. It literally took me less than 5 minutes to slip the mount into the receiver and hook up the power cable. I have both a front hitch and rear hitch with power running to each, so I can swap easily from front to back, whichever location is best for the situation. I simply can't say enough how happy I am with my setup and how much I love it. 335216


Comments

Still love this setup and the convenience. No issues. No rust of anything else to complain about.

DuaneK - 01/25/2018

33694

- C31009
by:

Simple to assemble. Works great. 425738



- C31009
by:

This winch plate fit my winch perfectly. The handles are very sturdy. This will make moving my winch from truck to trailer a snap. 180958



- C31009
by:

Even the hardware came with except the plate to the bumper attachment.When i ordered the plate the hard ware was in the winch box order.I had no idea. Very cool. 178525



- C31009
by:

Great service, very good value, more then I expected! 27527



- C31009
by:

You'll be impressed when you open up this item. Very well made, quarter inch plate, standard spacing of mounting holes 10" X 4.5" and 10" centers on the fairlead mount. If you are mounting a large winch, you will need half inch longer mounting bolts to secure the handles into the same mounting holes as your winch. Smaller winches you can the use the carriage bolts in the box. Comes with two rubber handle grips not shown in the picture and the receiver pin. 24769



- C31009
by:

excellent excellent 2787


9
9

Ask the Experts about this Curt Accessories and Parts
Do you have a question about this Accessories and Part?


  • Hitch-Mounted Winch Mounting Plate for Badlands Winch
  • We offer several hitch-type winch mounts that fit a 2-inch hitch. These include the Curt # C31009 with handles, Curt # C31010 without handles, the Draw-Tite # 6495 and Bulldog # BDW20011 among others. All are shown on the linked page. Most winches will bolt right up to these mounts since they use industry-standard mounting hole spacing but it is possible that a certain winch might req
    view full answer...

  • Front Mount Hitch Receiver and Winch Mount to Clear Bumper on a 2015 Ford F-150
  • I went out to the warehouse to take a measurement of Draw-Tite front mount receiver # 65067 for your 2015 Ford F-150. It measures 9-1/2 inches from the cross tube to the end of the receiver. Compare that to the Curt hitch # C31083 that you have installed to determine if there is a difference. You could just need a different mount for the winch such as # C31010. I have linked a video showing the key dimensions and features and another video featuring this mount. There is also a version...
    view full answer...

  • Front Mount Hitch Recommendation for 2015 GMC Sierra 2500
  • The Curt Front Mount Hitch Receiver, part # C31071, is confirmed as a fit for your 2015 GMC Sierra 2500. This hitch has a 2 inch receiver opening and is an easy, bolt-on installation. If you need to maneuver a trailer using your front hitch I recommend a ball mount like part # 2923. This ball mount has a 3/4 inch rise or a 2 inch drop. I have attached a link to a product review for this ball mount you can check out. If you need a hitch ball I recommend part # 63845 for the 2 inch...
    view full answer...

  • Front Mount Trailer Hitch and Winch Mount for a 2005 Ford Excursion
  • There are front mount hitches available for your 2005 Ford Excursion but TorkLift hitch # TLF1006 will not fit. The available front hitches that do fit are Draw-Tite hitch # 65022 and Curt hitch # 31114. Both are rated for 9,000 pounds line pull and 500 pounds vertical load. For a winch mount that fits in a 2 inch receiver we have: # C31010 # 6495 # BDW20011 # SW2050 # C31009 # SW2055 # BDW20155 # CU881084
    view full answer...

  • How Would Superwinch Tiger Shark 15.5K Mount to 2006 Chevy Silverado 2500HD
  • You'd want to install a front hitch on your 2006 Chevy Silverado 2500HD like the Draw Tite # 65028 which is confirmed as a fit so that you can mount the winch # SW1517200 to a hitch mount like the # C31009.
    view full answer...

  • Difference Between the Superwinch LP10000 and the Tiger Shark Series Winches
  • While we don't carry the Superwinch LP10000 winch we do know that it is an intermediate level winch with a lot of great features whereas the Tiger Shark Series like the part # SW1595200 that you referenced is more of an entry level winch. Just comparing the specs between the two winches I was surprised to see that the Tiger Shark does have a higher horsepower motor as well as the higher gear ratio meaning that it would reel the wire in a little bit faster. It does have a slightly lower...
    view full answer...

  • Front Mount Trailer Hitch Receiver Plate and Wiring for a Warn VR8 Winch
  • I checked with Warn and the mounting hole spacing for the VR8 winch is 10 inches side to side and 4-1/2 inches front to back with the overall length of the winch at 20.7 inches and 6.3 inches front to back. Based on that you can use Curt mount # C31009 or # C31010, Draw-Tite # 6495, or Superwinch mount # SW2050. At most your winch can draw up to 457 amps and a 650 cold cranking amp minimum battery is recommended. Based on these figures I would go with wiring and quick disconnect kit...
    view full answer...

  • Are Rear Trailer Hitch Receivers Rated for Straight Line Pull
  • None of the rear mounted trailer hitch receivers are rated/tested for straight line pull. They are only tested/rated for gross trailer weight (GTW) and tongue weight (TW). However, I spoke to my contact at Curt who informed me that the Curt Trailer Hitch Receiver part # C15324 which is a confirmed fit for your 2006 Chevrolet Avalanche should be capable of handling up to 9,000 lbs straight line pull. If you need a mounting plate for your winch to use on the back of the above trailer...
    view full answer...

  • Can I Mount A Superwinch 18k Winch To Curt Winch Mount Plate # C31009
  • The Curt Winch Mount Plate # C31009 will be able to support the winch, but you will need to measure the mounting points of your winch to determine if the winch will mount up. You will not want to exceed the capacity of your front mount winch for weight and winching. The mounting holes for the CURT Trailer Hitch Electric Winch Mount Plate # C31009, are 10 inches by 4.328 to 4.797 inches. It will accept a winch with a mounting pattern of 10x4-1/2 inches if the mounting holes on the winch...
    view full answer...

  • Recommendations for Adding a Front Mount Winch to a 2003 Jeep Grand Cherokee
  • Because of the way the Westin Sportsman Grille Guard, # 40-0125, attaches to the vehicle, see instructions link provided, a winch cannot be mounted to the grille guard. The connection method and construction of the grille guard are not sufficient for winching applications. What you can do is install a front mount trailer hitch, # C31048. This hitch will provide a safe, strong, and secure connection point to the vehicle frame which is ideal for winching applications. You could then use...
    view full answer...

  • Recommended Winch Mount For 2 Inch Receiver On 2015 Mercedes-Benz Sprinter Van
  • For your 2015 Mercedes-Benz Sprinter Van with 144 Wheel Base, you would need to use the winch on the rear receiver as there are not any front hitch receiver options from our manufacturers compatible with your vehicle. We do have a rear trailer hitch receiver compatible with your vehicle. It is the Curt Class III # 13358. For a winch mount, I recommend the Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly # C31009. This will work with most standard winches. I have...
    view full answer...

  • Recommendation for an Electric Trailer Winch Hitch Mounted Winch Plate for a Superwinch
  • You will need to check the bolt hole mounting pattern of your Superwinch LP8500 but we do offer several hitch mounted winch mounting plates that may work. First, we have the Draw-Tite Mounting Plate, # 6495. The mounting hole dimensions for it can be found on the product page, below the description. Next we have the Curt Mounting Plate, # C31010. On it, the first set of mounting holes are 10 by 4-1/2 inches, and the second set of mounting holes measure 6-1/2 by 4-1/2 inches center to...
    view full answer...

  • Front Hitch and Winch Mount Plate Recommendation for 2015 GMC Sierra 1500
  • The Curt front hitch part # C31069 is a confirmed fit for your 2015 GMC Sierra 1500 and would work well with a winch mount. It has a line pull rating of 9,000 lbs. The Curt winch plate part # C31010 is designed to fit the standard winch mount bolt patterns. Or we have the plate that has the handle assemblies bolted to the plate as part # C31009.
    view full answer...

  • Recommendation for a Mounting Plate for a Badlands Winch
  • You will need to check the bolt hole mounting pattern of your Badlands Winch, but we do offer several hitch mounted winch mounting plates that may work. First we have the Curt Mounting Plate, # C31010. On it, the first set of mounting holes are 10 by 4-1/2 inches, and the second set of mounting holes measure 6-1/2 by 4-1/2 inches center to center. I have included a picture showing the various dimensions of the Curt mounting plate. Next we have the very basic Superwinch Portable...
    view full answer...

  • Dimensions of the CURT Trailer Hitch Electric Winch Mount Plate and Handle Assembly
  • I pulled a CURT Trailer Hitch Electric Winch Mount Plate, # C31009, to measure the plate thickness. It is 1/4 inch thick steel. The roller fairlead mounting holes are elongated and will accept a 10 inch on center mounting hole pattern. The center to center distance of the holes is actually 10-1/2 inches. The mounting holes for the CURT Trailer Hitch Electric Winch Mount Plate and Handle Assembly, # C31009, are 10 inches by 4.328 to 4.797 inches. It will accept a winch with a mounting...
    view full answer...

  • Handle Height on the Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly
  • The handles on the Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly, part # C31009, are 12-1/4 inches high. From the top of the plate to the bottom of the handles, there are 10-1/2 inches of clearance.
    view full answer...

  • Draw-Tite Front Mount Receiver Hitch and Winch Mount for a 2010 Chevy Silverado 1500
  • The front mount Draw-Tite hitch that fits your 2010 Chevy Silverado 1500 is # 65052. For a winch mount Draw-Tite has # 6495. But there are other options including # BDW20155 and # BDW20011 from Bulldog Winch, # SW2050 and # SW2055 from Superwinch, # CU881084 from ComeUp Winch (for certain ComeUp models) and # C31009 and # C31010 from Curt. Current pricing is available on the product pages and you can see shipping options after adding them to the cart.
    view full answer...

  • What is the Capacity of Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly
  • Curt trailer hitch mount winch mount # C31009 is rated for 9,000 pounds line pull. A winch can be rated higher but you cannot exceed the 9k line pull or what the hitch and vehicle are rated for, which ever is lowest.
    view full answer...

  • Curt Winch Mount Plate Recommendation for Superwinch Tiger Shark Winch
  • Yes, the Superwinch Tiger Shark Series Off-Road Winch # SW1511200 that you referenced will fit the Curt Winch Mount part # C31009 that you also referenced. The winch has more capacity than the mount so you would have to stay under the 9k rating of the mount. The Curt mount is designed to fit the standard mounting bolt pattern of winches like this Superwinch.
    view full answer...

  • Winch Carrier Needed for an 18 Series Warn Winch
  • I am not sure what the mounting bolt pattern is for your 18 Series Warn winch but we have the Curt Trailer Hitch Electric Winch Mount Plate # C31009 which has the standard 10" x 4-1/2" bolt hole patterns and fits a 2" hitch receiver. This also includes handles to help make transporting your winch much easier. Attached is a photo of the dimensions for the mounting plate as well as a review video for you to reference.
    view full answer...

  • Will the Front Mount Trailer Hitch Receiver Winch Mounting Plate # 6495 Fit a 1998 Jeep Wrangler
  • Yes, the Front Mount Trailer Hitch Receiver Winch Mounting Plate, item # 6495, will fit in a Curt 2 inch receiver like the Curt Trailer Hitch for the 1998 Wrangler by Jeep, item # 13408. Other parts you may be interested in are the Curt Trailer Hitch Electric Winch Mount Plate, item # C31010, or the Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly, item # C31009.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Updated by:
Laura H
Photos by:
Jim W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.