Replacement Lift Bracket for Curt Weight Distribution Systems

Replacement Lift Bracket for Curt Weight Distribution Systems

Item # C17008

lowest price pledge

Retail:$33.62

Our Price: $20.95

You Save: 38%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 6 lbs

Quantity: 
In Stock, Ships Today
Curt Accessories and Parts - C17008
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Weight Distribution
  • Hardware
  • Curt
Replaces one of the lift brackets that came standard with your Curt weight distribution system. Bracket mounts to your trailer frame with the included hardware and provides an attachment point for your lift chain. Call 800-298-8924 to order Curt accessories and parts part number C17008 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Replacement Lift Bracket for Curt Weight Distribution Systems. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (9)
  • Q & A (7)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Accessories and Parts - C17008

Replaces one of the lift brackets that came standard with your Curt weight distribution system. Bracket mounts to your trailer frame with the included hardware and provides an attachment point for your lift chain.


Features:

  • Replaces 1 lift bracket on your weight distribution system
    • Works with Curt trunnion-bar and round-bar weight distribution systems
  • Provides the attachment point for your lift chain
  • Fits trailer frames up to 2-3/4" wide
  • Resists rust with durable black powder coat finish
  • Includes:
    • 1 Lift bracket
    • (1) 2" Long x 1/2" diameter bolt
    • (1) 4" Long x 1/2" diameter bolt
    • 1 Safety clip


17008 Curt Weight Distribution Hook-Up Bracket







Video of Replacement Lift Bracket for Curt Weight Distribution Systems


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Weight Distribution C17008 Review

Today we're going to be taking a look at the replacement lift bracket for the Curt weight distribution systems. This is going to replace one lift bracket on your weight distribution system. It's designed to work with the Curt trunnion bar and round bar weight distribution systems. It simply provides the attachment point for your lift chains. This bracket mounts on the framing of your trailer, and then you connect your lift chain to the hook, right here, and then you can raise this up into position to apply the necessary tension to the spring bar. So, really nice design, steel construction. It's going to do a great job at resisting rust and corrosion with the durable black powder coated finish. A few measurement to go over with you real quick.

It's going to take up about 4" along the trailer frame. It's designed to fit trailer frames that have a width measurement of up to about 2 3/4" wide. You can see everything that it comes with. You're going to get one lift bracket. You're going to get one 2" long by 1/2" diameter bolt, one 4" long by 1/2" diameter bolt, and one safety clip. The safety clip installs right here and secures the bracket into the engaged position.

The longer bolt can be used on trailer frames that are more narrow. Then the shorter bolt can be used on trailer frames that are a little bit thicker or wider. Also, nice low profile design, really doesn't interfere much, in most situations, with items that may be mounted onto the trailer frame such as propane cylinders or tanks, battery boxes, generators, those kinds of items. So, really nice design. Again, this is a replacement for the Curt weight distribution systems..


Customer Reviews

Replacement Lift Bracket for Curt Weight Distribution Systems - C17008

Average Customer Rating:  4.8 out of 5 stars   (9 Customer Reviews)

Replaces one of the lift brackets that came standard with your Curt weight distribution system. Bracket mounts to your trailer frame with the included hardware and provides an attachment point for your lift chain.

- C17008
by:

I haven't installer the parts but they are great.the shipping was very quick.everything was great and would buy again from these fine folks would recommend them to anyone. Thanks James. 457151



- C17008
by:

These were just what I needed to use with my Valley equalizer bars. I have 2 trailers I use with the bars, and this saves me from having to swap the brackets. The only downside was the pipe I use to move the brackets up and down was too small for the new ones, I was able to use a slightly large diameter pipe instead. Overall, great experience, very fast shipping (as always), and a good product at a very good price. 545087



- C17008
by:

Parts fit perfectly, and were high quality. Delivery, as usual, was fast. Thanks! 638962



- C17008
by:

These were a gift to a friend 634683



- C17008
by:

I had a set of sway bars but not the trailer attachments. After searching the internet I found at etrailer what I thought would work. I ordered the parts on normal shipping costs. They upgraded my shipping and the parts arrive a couple of days earlier. I have not yet installed the parts but they are exactly what I was looking for. I would highly recommend etrailer for RV parts. 597904



- C17008
by:

Great replacement part. 548009



- C17008
by:

Just what I needed. Fast and friendly service. Thanks 514523



- C17008
by:

Just exactly what I was looking for. Fast delivery. Good Product. 465868



- C17008
by:

The material looks strong and sturdy. The pin hole for locking back is a cheaper way of making the bracket, but I will see if it holds as good as the other designs. This welded steel design is better than a forged design that the other brands had, because it can be welded back together if it breaks. The others cannot. 242813


9
9

Ask the Experts about this Curt Accessories and Parts
Do you have a question about this Accessories and Part?


  • Weight Capacity of Replacement Lift Bracket for Curt Weight Distribution Systems.
  • The replacement lift bracket, part # C17008, isn't specifically rated for a weight capacity. It's a direct replacement for Curt weight distribution systems, like the MV # C17057 which is rated for 14,000 pounds so it'll handle over 12,000 pounds. As long as you have a Curt system that uses this type of bracket it'll handle the weight capacity. If you have a different system that this isn't designed for then I don't recommend using it. Let me know which system you have and I'll see...
    view full answer...

  • Replacement Parts for Curt Weight Distribution System
  • We do have a large selection of replacement parts available for Curt weight distribution systems, which I have linked for you below. It sounds like you might be needing the Spring Bar Retainers # 17109, which are designed for the Curt Round Bar systems. This kit includes two clips, two locking pins, and two rivets. I am not sure what you mean by the L shaped keeper, but we do also have the Replacement Lift Bracket # C17008, which is what mounts to the trailer frame and provides...
    view full answer...

  • Lift Brackets for Pro Series Weight Distribution System
  • While the Replacement Lift Bracket for Curt Weight Distribution Systems # C17008 has never been tested with a Pro Series weight distribution system (Husky is a different brand entirely) it will likely work. That said, there are brackets made for Pro Series, the Replacement Snap-Up Bracket for Pro Series RB2 Weight Distribution Systems # PS58362 which fits models 49568, 49569, and 49570. In regards to the hitch ball, we do carry a 2" hitch ball with a 1-1/4" shank, the Curt # A-90.
    view full answer...

  • Can Curt Chain Hanger Brackets be Used with a Pro Series Weight Distribution System
  • Although each Weight Distribution (WD) system manufacturer has their own chain brackets, they are a pretty universal fit. The Curt hangers, parts # C17003, # C17005, and # C17008, haven't been tested with a Pro Series WD system but they should fit and work just fine. If you would rather go with chain hangers from Pro Series then you would need to go with part # PS58362.
    view full answer...

  • Replacement Part For Curt Trunnion Style Weight Distribution
  • I'm not sure what L-clips you are describing in the Curt Weight Distribution System, but hopefully one of these replacement parts will be what you were describing. We have the Replacement Hook Up Brackets for Curt Weight Distribution Systems # C17208, the Chain Hangers for Curt Weight Distribution Systems - Clamp On # C17003 or bolt on # C17005. We have the Replacement Lift Bracket for Curt Weight Distribution Systems # C17008. We also have the Curt Spring Bar Retainer Package...
    view full answer...

  • Replacement Lift Hangers for Engaging Bar Chains on Curt MV Weight Distribution System
  • The Curt MV Weight Distribution System w/ Friction Sway Control # C17062 sounds like the lift bracket hook may be needing replaced. That hook should easily hold onto the chain link to lift the bar. For this replacement I recommend the Replacement Lift Bracket for Curt Weight Distribution Systems # C17008.
    view full answer...

  • Can the Weight Distribution Bracket part # C17008 be Used with the Curt WD C17062
  • The Replacement Lift Bracket # C17008 that you referenced could be used with the part # C17062 weight distribution system. The brackets are slightly different than what came with the kit but they will still work just as well. As long as you stay under the capacity of your weight distribution system these brackets would be heavy duty enough.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Photos by:
Sam P
Written by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.