Camco RV Water Heater Temperature and Pressure Relief Valve - 3/4" Valve w/ 4" Probe

See what our Experts say about this Camco Accessories and Parts

• Distance from Top of Valve to Threads on Camco Water Heater Valve CAM10473
  From the base of the threads of the Camco Water Heater Valve # CAM10473 to the top of the valve measures 2.4 inches.
  view full answer...
  
• Replacement Pressure Relief Valve For Suburban Water Heater
  I did some checking and the Suburban replacement pressure relief valve part number is the 161230 which uses the same 3/4 inch thread size as the # CAM10473 so this would work well for you. All of the Suburban water heaters use the same relief valve so this would fit all of them.
  view full answer...
• Replacement Pressure Relief Valve for a Watts 100xl with 3/4 inch Inlet
  The part # CAM10473 would work as a replacement for the Watts 100XL pressure relief valve. This is essentially the exact same thing as what you are looking for just made by a different brand.
  view full answer...
• Replacement Pressure Relief Valve for Suburban SW3DE Water Heater
  Based on my research your Suburban SW3DE model water heater uses a 3/4 inch pressure relief valve like the Camco # CAM10473. This particular unit will work well to replace the existing valve on your water heater and its epoxy-coated metal will resist any corrosion over time.
  view full answer...
• Difference Between Camco Pressure Relief Valve Part Numbers # CAM10423 and # CAM10473
  The difference is the size of the threads. The Camco RV Water Heater Temperature # CAM10423 has 1/2 inch diameter valve size and the # CAM10473 has 3/4 inch diameter valve size.
  view full answer...
• Replacement 1/2 Inch Water Heater Pressure Relief Valve
  On the Camco RV Water Heater Temperature and Pressure Relief Valve # CAM10423 the threaded part with the probe is 1/2 inch inner diameter. The similar # CAM10473 is 3/4 inches. Based on your picture you need the 1/2 inch model # CAM10423.
  view full answer...
  
• Replacement Parts For Suburban SW6DEL Water Heater
  The Camco Water Heater Element # CAM02143 is what you need for the SW6DEL water heater. According to our research this element will replace the heating element perfectly in your Suburban water heater. You can also use the Camco RV Water Heater Anode Rod part # CAM11563 to replace the anode. From our research you can also use the Camco RV Water Heater Temperature and Pressure Relief Valve part # CAM10473 to replace the relief valve.
  view full answer...
  
• Pressure Relief Valve For An Atwood g6a-8e Water Heater
  For your Atwood g6a-8e water heater I recommend the Camco RV Water Heater Temperature and Pressure Relief Valve Item # CAM10473. According to the repair manuals for that model. They require a 3/4 pressure relief valve. This relief valve has an anode rod to help prevent build up of contaminants inside the tank. The rod will attract those contaminants so they do not cause further issues.
  view full answer...
• Troubleshooting a Pressure Relief Valve on a RV Tankless Hot Water Heater
  It sounds like the pressure relief valve on your tankless RV water heater may be faulty or not seated properly. If the pressure relief valve is faulty, it would need to be replaced. - Camco RV Water Heater Temperature and Pressure Relief Valve # CAM10423 (1/2" valve) - Camco RV Water Heater Temperature and Pressure Relief Valve # CAM10473 (3/4" valve) Depending on the manufacturer of the water heater and the age, it may be covered under warranty. Before reaching out to the manufacturer...
  view full answer...
• Furrion RV Tankless Water Heater Install
  The Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door # FR98SR will come with everything you need to install it. You will need some plumber supplies like Teflon tape and such but you can source those at a local hardware store very easy. However I do recommend getting or replacing your water heater temp and pressure relief valve. Depending on your fitting sizes you will need the Camco RV Water Heater Temperature and Pressure Relief Valve - 3/4" Valve...
  view full answer...
• Fogatti Tankless Water Heater Drains Every Time It Is Used
  I reached out to the manufacturer and it would seem you probably have an open/faulty Drain screw. Pull off DRAIN PIPE and use 3/16" flat blade screwdriver to make sure DRAINAGE SCREW is tightened all the way clockwise in its housing. Replace DRAIN PIPE and test. If that doesn't work it might be a faulty temp/pressure relief valve. When the valves go bad they start to vent when the pressure is not at the danger level. This can be just dripping to a full blown spray. There is not an adjustment...
  view full answer...
• Can 5,200 lb. Hubs and Bearing Be Used on a 7,000 lb. Axle and Replacement Parts
  A 5,200 lb. and 7,000 lb. axle will have the same spindle dimensions. The difference actually is the hubs and the outer bearing. So you can use your friends 7,000 lb. axle with your 5,200 lb. hubs and bearings. The capacity of the axle would just be 5,200 lbs. and not 7,000 lbs. if you did that. I have listed out the correct bearings, seals and brakes for a 5,200 lb. axle below. Bearing Kit - Bearing Kit, LM67048/25580 Bearings, 10-36 Seal # BK3-300 Brakes - Electric Trailer Brake Kit...
  view full answer...

Do you have a question about this Accessories and Part?