Replacement Base Legs for Curt Q20 5th Wheel Trailer Hitch

Ask the Experts about this CURT Accessories and Parts

Is Assembly Hardware...

• Is Assembly Hardware Included with Curt C16094 Replacement Legs for Q20 Fifth Wheel Hitch
  As you can see in the provided photo, the hardware needed to attach the # C16904 Curt Q20 Replacement Legs to the hitch center section are included, as are the pins and clips used to attach the hitch to the bed rails.
  view full answer...
  
• Can Curt Slider Q20 Hitch Be Converted to Stationary Hitch
  Yes, if you wanted to convert your Curt Slider Q20 hitch part # C16536 to be a stationary hitch all you need is the leg kit part # C16904.
  view full answer...
• Can Curt Q20 Slider Hitch Be Converted to a Stationary Hitch
  Yes, what you would need is the base leg kit for Curt Q20 part # C16904. This will convert your Curt Q20 slider part # C16536 to a stationary hitch.
  view full answer...
• Will Curt Q20 5th Wheel Hitch Legs Fit the Q24 Curt 5th Wheel Hitch
  Yes, the Curt Q20 legs, part # C16904, do fit on the Q24 hitch, part # C16245. The bolt holes line up and the legs are the same height. You will decrease the hitch's capacity to 20,000 pounds though.
  view full answer...
• Are Curt Q20 Legs Compatible with a Curt Q25 5th Wheel Head?
  Yes, the Curt Q20 legs, like item # C16904, do fit with the Replacement Head Unit for Curt Q25 5th Wheel Trailer Hitch item # C16565. The bolt holes line up and the legs are the same height. You will decrease the hitch's capacity to 20,000 pounds though.
  view full answer...
• Solution for Needing Additional Height from Curt Q20 Fifth Wheel Hitch
  There isn't a taller set of legs you can install on your Curt Q20 fifth wheel hitch # C16130 but what you might be able to do is remove your trailer's pin box and install it in a lower set of mounting holes to gain additional height like if you could raise your hitch head higher.
  view full answer...
• Best Way to Tow a 5th Wheel with Flat Bed Truck
  I have a solution for you, but the Curt Q legs # C16904 that you're looking at are only going to come in one size and the Curt Q head when attached to any of the available legs is always going to sit between 13-17" tall. With that being said, the best solution to tow a 5th wheel trailer with a flatbed truck is going to be using the Reese Low-Profile Hitch # RP30054, which is adjustable between 9-1/2" and 12-1/2" tall and will provide you with a way to compensate for the added height of...
  view full answer...
• Can Slider Unit on Curt C16536 Q20 5th Wheel Hitch Be Replaced with C16904 Leg Kit
  Absolutely. The Curt # C16904 Replacement Base Legs are fully compatible with the Curt # C16536 Q20 5th wheel hitch center section/hitch head. You don't mention the length of your truck bed, but be aware that the Curt Q Series isn't compatible with rotating pin boxes like the Reese Revolution/Sidewinder or Lippert Turning Point. I've linked to a product description video that explains the features of the Curt Q20 5th wheel hitch.
  view full answer...
• Can Fixed Legs Replace Slider on Curt Q20 Fifth Wheel Trailer Hitch
  You can certainly replace the R20 Slider # C16550 on your Curt Q20 5th Wheel Trailer Hitch with Slider # C16536 with fixed legs. The part number you referenced, the Curt Replacement Leg Kit for Q20 5th Wheel hitch # C16904, is the correct kit to replace the legs of your Q20 hitch. This kit includes the hardware needed to install the replacement legs. Since your 2004 Chevrolet Silverado has an 8 foot bed, you should not have any issues with turning clearance using a fixed hitch over...
  view full answer...
• Curt Fifth Wheel Hitch Recommendation that Smoother Than E16 Slider
  The Curt E16 slider hitch has a lot of play in the slider assembly like you noted but also quite a bit in the jaw system as it's a slide bar style that allows the king pin to move around quite a bit when latched. If you wanted a much smoother Curt fixed hitch your best option is the Curt A16 hitch part # C16120. The jaw design of this hitch provides a 360 degree contact with the king pin which holds it very tight and minimizes noise. Now the head will be located right over the rear axle...
  view full answer...
• Is Curt Q20 Sliding 5th Wheel Hitch Compatible With 8 Foot Truck Bed?
  The Curt Q20 sliding 5th Wheel Hitch # C16536 can absolutely be used in your long bed Ram. The sliding base isn't needed for a long bed, so it is a little heavier to install but will have no other issues. If you want new base legs for an easier installation you can use the Replacement Base Legs for Curt Q20 5th Wheel Trailer Hitch # C16904. This swap out will make a 93 lb difference as well as give you a more solid hitch because there won't be as many moving parts. You may also want...
  view full answer...
• Replacement Legs for a Curt Q5 5th Wheel Trailer Hitch
  For your Curt Q5 5th wheel trailer hitch you will need legs # 16125-SK13. Even though you have a long bed truck you can still use the slider hitch. You would just keep it locked in the towing position since there will not be a need to slide it back.
  view full answer...
• Leg/Slider Kit That Can Fit Curt Q20 Fifth Wheel Hitch
  The Curt Q20 fifth wheel head unit part # C16530 can fit a few leg kits depending on the application. For standard fixed legs for a long bed truck you'd want the part # C16904 or for a slider base # C16550 and you'd be set.
  view full answer...
• Correct Replacement Hitch Legs for a Curt Q25 5th Wheel Trailer Hitch
  The correct replacement hitch legs for a Curt Q25 5th Wheel Trailer Hitch part # C16265 are the Replacement Base Legs for Curt Q25 5th Wheel Trailer Hitch part # C16963. If you have standard above bed base rails on a 2009 Ford F-250 like the Curt Custom Fifth Wheel Installation Kit for Ford part # C16448-204 they will fit.
  view full answer...
• Replacement Base for Mopar M20 5th Wheel Hitch to Fit Standard Base Rails
  It sounds like you have a Mopar M20 5th wheel hitch that is designed to fit in the 5th wheel prep package on Ram trucks but you have standard base rails in your 2014 Ram 1500 like the Curt # C16306-204. If this is the case the solution is actually pretty simple because the Mopar M20 is just a re-branded Curt Q20 hitch and what you'll need is to replace the base of the hitch so it fits standard base rails. For that you'll need the Curt R20 Round Tube Slider for Q20 5th Wheel Trailer Hitches...
  view full answer...
• Finding Replacement Parts For a Curt 5th Wheel
  Good news, I can help you find the replacement parts for your Curt 5th Wheel. As long as Curt sells a particular part as a replacement we should be able to get you the part for your Curt Slider # C16536. We have several replacement parts already listed for the Curt Q20 # C16130 and will continue to grow as demand and availability of the item is requested. The Curt Q20 you purchased has a warranty, but we know that it doesn't cover normal wear and tear. We try to connect the replacement...
  view full answer...
• Will a Curt 5th Wheel Hitch From a Chevy Silverado Fit a 2010 Ford F-250
  The Curt 20K 5th Wheel Hitch will work on your 2010 Ford F-250 but I would need to know what base that 5th wheel hitch has in order to see if additional parts are needed. If it installs via pucks like the Curt Q20 5th Wheel Trailer Hitch part # C16530-16025 then you can reuse the head and center section but you will need a new base along with above bed rails for your truck. If it installs via above bed base rails like the Curt Q20 5th Wheel Trailer Hitch part # C16130 then all you will...
  view full answer...
• Compatible Legs For A Curt Q20 Fifth Wheel Hitch
  No, the legs of a Curt A16 # C16120 are only rated for 16,000lbs so they would not be compatible for use on a Curt Q20 # C16130. You would instead need the Replacement Base Legs for Curt Q20 5th Wheel Trailer Hitch # C16904. If your truck has an in-bed puck system then you'll want one of the following legs depending on the brand of your truck: Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package # CU53FR. Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package...
  view full answer...

Do you have a question about this Accessories and Part?