These padded, waterproof covers fit over your 2" Schedule 40 PVC guide-on posts to protect your boat from scuffs. The covers are open-ended to allow exposure of LED lights, and they close with included zip-ties. Black color.
Features:
Specs:
A 1/2" thick pad inside the cover provides cushion between your boat and the post. The pad is constructed of closed-cell polyurethane foam, which is firm and water resistant.
Each end of the cover is open to fit easily over the guide post and to allow exposure of LED lamps. Reusable nylon zip-ties are included so that you can quickly and easily cinch the cover tightly over the post at each end.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number CE27901. These are the CE Smith padding covers for the post style guide-ons on your boat trailer. These are black in color, 48 inches in length, and this product is for a total of 2 covers. Now these padded covers will help protect your boat from scuffs and scratches. They will go around your bare PVC guide-on posts on your trailer to keep them from damaging your boat. You can see it gives you a half-inch thick foam inter-pad; provides cushion between your post and boat.
They are open-ended on both ends. Each end is open-ended. The reason they do that is to allow exposure of your LED lights. Some of the posts on the trailer will have LED lights so if you want those to be shown it will leave it open on both ends. The cover on it is a durable nylon construction.
It has a nice water-proof polyurethane coating to help keep any water out. These are black in color. It's a very simple installation. All you do is slide this on over your guide-on post and then once it's completely over you just cinch these reusable zip ties around her to hold them into place. Then if you need to loosen the zip tie, you just pull out on that and it will open back up. Now again, the application for these are two inch scheduled 40 PVC post-style guide-ons with or without the LED lights.
The maximum outer diameter of the post, which is the inside measurement right here, two and three-eighths inches and they are made for a snug fit. The length on these are 48 inches and again this part is for a quantity of two covers. One tip I do want to recommend that they mention is when you do go to slide these on over the posts, if it gets to be hard for these to slide on they recommend just pour some liquid dish soap on it and it will make them slide on a lot easier. Don't use any type of oil. You don't want the oil to react to the foam in there so you just want to use liquid dish soap. That should do it for the review on part number CE27901 the CE Smith padded covers for the post-style guide-ons on your boat trailer.
These are black in color, 48 inches in length, and total of two of them.
Average Customer Rating: 4.9 out of 5 stars (12 Customer Reviews)
These padded, waterproof covers fit over your 2" Schedule 40 PVC guide-on posts to protect your boat from scuffs. The covers are open-ended to allow exposure of LED lights, and they close with included zip-ties. Black color.The pads arrived rather quickly. My hull is navy blue and the white PVC uprights were leaving white marks all along the hull. The pads are quite thick and robust and totally solve the marking issue. I would recommend to anyone. 699773
Great product! They fit very tight and look great. 243601
875001
Great product. Fits well and allows for adjusting the length of the pad on my post. 867097
Very good quality, easy to install, looks great. 831664
Still black, still perfect. Best purchase we made yet for our trailer! 800100
The post wraps are supper and save your rig from all the scratches and bumps while loading and unloading in windy conditions. Just a great product and very easy to install. 593595
Well made and look cool too on my Chaparral boat trailer! 497881
Great product. Use a little WD d 40 and they slip right on.... 371989
Great support with quick response to shipping! I would definitely order again for any boat trailer needs. 310725
Wish I'd bought these years ago. Don't hesitate. Must have if docking boat on lift. Sure helps with trailering too, but invaluable for lift. 275031
-Product arrived in a timely fashion, double boxed. -All hardware and small parts were in a sealed bag along with the instructions and inspectors number. -Instructions were very effective because of the use of pictures and diagrams. -Installation took 20 minutes. Quality workmanship. 216025
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.