CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1
(149 reviews)
Price: $6.20
In Stock
CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1
Item # CE10200G
Retail:$11.27
Our Price: $6.20
You Save: 45%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (149)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE10200G
- Bunks
- Swivel Bracket
- 2 Inch Tall
- 3-1/2 Inch Long
- Galvanized Steel
- 1-3/8 Inch Wide
- CE Smith
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. Mounting holes are 2-1/2" apart on center.
Features:
- Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer
- Helps you to fit the boat hull snugly onto trailer during the loading process
- Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board
- Bolt-on installation
- Attaches to bolster bracket on trailer
- Does not include mounting hardware
- 11-Gauge, galvanized steel construction is sturdy and resists corrosion
- Made in the USA
Specs:
- Quantity: 1 swivel bracket
- Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall
- Diameter of swivel mounting hole: 1/2"
- Diameter of flange mounting holes (each): 3/8"
- Spacing of mounting holes: 2-1/2" apart on center
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
10200G40 11-Gauge, Galvanized Steel Replacement Swivel Bracket by CE Smith - 3-1/2" Long x 2" Tall - 2-1/2" Mounting Holes
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1 - CE10200G
Average Customer Rating: 4.9 out of 5 stars (149 Customer Reviews)
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. Mounting holes are 2-1/2" apart on center.by: Roger02/09/2022
The gauge of metal is not as thick as the one that broke on my trailer but I see no reason why it is not a suitable replacement.
by: Mike07/19/2020
Brackets are perfect replacement. Strong and hold everything securely. Will be ordering another set when I go to tackle by next project.
Mike C.
7/22/2021
They work great. Glad we found thos company
by: John09/15/2023
YOU PROVIDED GOOD INFORMATION AND DELIVERED QUICKLY.
by: RGood09/26/2016
Same exact size, shape, and quality as competitors advertising products for three or four times the price....sometimes more!!!!
Now I can put my boat trailer back together and get back to fishin!!!
by: Dave05/26/2018
My trailer had been stored outside for several years. The metal, wood and carpet had deteriorated to a point the trailer could no longer be used safely. I searched for parts at all local suppliers but no one had all the parts I needed in one place. I searched the net and discovered etrailer.com. I ordered everything I needed and the parts were delivered 4 days earlier than the promise date. I recommend etrailer.com without hesitation.
by: Andrew 07/03/2023
As advertised prompt delivery.
by: Ronnie 01/19/2022
I am going to use this as a hitch for my mower
Ronnie
1/23/2023
worked great
by: Songdog06/18/2017
I had some concerns with these brackets when i received them because the brackets these were replacing were 1/4 steel. My boat weighs over 5k lbs and my concern was that these would have a tendency to fold over with the weight of the boat on them. That hasn't been the case and they seem to be holding up just fine. When i purchased the boat the trailer was dire need of some repairs, broken bunks, rusted hardware, carpet falling off, electrical issues, tires. This was one of several needed repairs and i would recommend these brackets to anyone.
by: Michael 04/03/2023
just what i needed, Thank you for helping me...
by: Greg 08/17/2022
PRODUCT ARRIVED A DAY EARLY! FIT OUR APPLICATION PERFECTLY!
by: MWM10/30/2016
I'm converting a 1970s, 14 foot boat trailer for use with a hull that would benefit from wider bunks. The original 2x4 bunks are mounted to the bolster brackets as stringers providing a nominal 2 inch surface supporting the boat hull. Removing the old bunks and rotating the bolster brackets 180 degrees positions a single 1/2 inch mounting hole perpendicular to the trailer travel and allows attaching swivel brackets. New bunks can be attached to the swivel brackets to support the boat hull with the width of the bunk face, nominal 4 inch in my case.
I found etrailer had the best price for the CE Smith swivel brackets and shipping. Like every purchase I’ve made with etrailer, the swivel brackets arrived quickly and are exactly as described, specified and pictured.
by: gsc07/27/2017
better than I expected. needed to replace bunk beds with rotted brackets. this replacement was thicker than original. a real time saver at 90F. good job and thank you etrailer. highly recommend. try to do this in the spring or fall.
by: Den Dz05/17/2013
Built SOLID. I don't anticipate any problems with these bunk brackets. Delivery was great.
Den D.
5/18/2014
Bery heavy duty. I love the quality. Well worth the price!
by: Lee05/02/2016
Where I live there are no boating supply stores, other than Walmart. I had been searching for alternatives to buy parts for my trailers that needed repair. I came across etrailer and the prices were great! Shipping was fast and my products are same fit and function as the original parts. This made the trailer repair easy and less expensive than other internet dealers. Look forward to more business with etrailer.
by: Michael 10/11/2022
Perfect for my boat bunk redo.
by: James07/19/2019
Perfect replacement part for my nearly 30 year old boat trailer! Prompt delivery and excellent follow-up by customer service personnel! What else can one ask for ? Oh, right reasonable pricing and high quality product.
James
7/20/2020
Terrific!
by: Gary03/17/2013
Excellent product, lowest prices by a mile, lightning fast delivery and the best customer service ever. If you don't shoo at etrailer you're crazy.
Gary B.
3/17/2014
All parts still in great shape!! High value products.
Patrick B.
3/19/2014
Thanks for coming back and checking in with us. Glad to know the parts are holding up.
by: Travis M12/07/2022
The product was as described and worked great.
by: John04/08/2013
Worked well to replace bunks and old rusted through brackets on my 19 year old boat trailer. Seem sturdy and holes were sized to take sturdy bolts.
by: Jerry 12/05/2020
Just received the boat trailer bunk brackets yesterday, Dec. 4th. One day later and I just finished installing them with a perfect fit. Appears to be very good quality and appreciate receiving very quickly.
by: Michael 09/25/2022
Exactly as described, just what I needed. etraolwr - highly recommend for ease of service and delivered as committed.
by: Jay05/30/2017
Worked perfect for mounting my new bunks on the old trailer. Still look as good as the day I installed them.
by: mike f10/03/2014
best price I could find on these bunk brackets. great customer service and fast shipping. Now the fun part replacing the bunks anyone work for beer?!?!?!
by: Gregory 07/22/2020
It is a solid robust piece of steel as appears in the photo. Just make sure you understand exactly what size holes are in the component as you may need to drill them out to a larger size depending on your application as I did.
by: Robert06/06/2020
Having found this site was a relief. The order was delivered sooner than I had expected.
I will keep this site bookmarked.
When I saw that the boards on my boat trailer had come loose I had to tie them in place. Now the problem of refastening the bunks properly is a problem solved.
25
149
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Could CE Smith Swivel Brackets be Used on Boat Lift with Bunk BoardsYes the CE Smith Swivel Bracket part # CE10200G would work great on the bunk boards of a boat lift like you have. Trailer swivel brackets and boat lift swivel brackets are essentially the same so they are interchangeable.
view full answer...
- Is There a Weight Capacity for the CE Smith Swivel Bracket for Boat Trailers # CE10200GThere isn't a set weight capacity for the CE Smith Swivel Bracket for Boat Trailers # CE10200G, if you used enough you wouldn't have a problem. When I've spoken to my contact at CE Smith I was informed that the limiting factor will how the brackets are attached to the trailer frame and not the actual brackets. So if U-bolts are used they would fail before the brackets.
view full answer... - Should Bunk Boards Tilt While Loading the Boat on the TrailerThe swivel brackets like part # CE10200G that you are referencing will allow you to adjust the angle of the bunk boards so that they can effectively contour to the shape of the pontoons on your boat. Once they are in the correct position you will then want to tighten them so that they do not move when the boat is loaded. You may also need to adjust the height of the brackets that attach the bunk boards so that they are making contact with the pontoons. If you are having problems with the...
view full answer...
- Determining The Length Of Bolster Brackets For Boat Trailer Carrying Twin Trawler 10I was able to find the trailer you mentioned on the website for your Twin Trawler 10 and I see what you mean about the bunk boards being centered in-between the hulls. Since your boat measures 5" from the bottom of the trolling motors to the recessed part of the boat where the bunk boards will rest and your 8" bolster brackets are too short I recommend taking a simple measurement to make sure you get the correct length brackets without guessing on length. What you will need to do is with...
view full answer... - Is There a Way to get a 14 Inch Bolster Bracket?We do have an option to get you to the 14 inches, but it will be parts that need to be purchased separately. So with that being said, the CE Smith Bolster Bracket # CE10102G will measure 12 inches tall and if paired with the CE Smith Swivel Bracket # CE10200G, it will get you to the 14 inches.
view full answer... - Can the CE Smith Bracket # CE10200G be Used to Secure 8 Foot Long 2x4s on a Boat RampThe bracket, # CE10200G, could potentially work. You would place then every couple of feet on the ramp attached at those crossmembers that support the top deck of the ramp. But I have another possible solution for you that one of the other Experts came up with. You already have most of the ramp together so you could then attach some rollers, # DL21741, the length of the ramp and roll that jetski into the water. These rollers can be mounted directly to the surface of the ramp with the...
view full answer...
- Replacement Brackets for CE Smith Bunk-Style Guide-Ons for Boat TrailersIf you are talking about the brackets that hold the posts to the frame then you could use kit # CE11452-A. If you are talking about he swivel brackets that hold the bunk boards to the posts then we have # CE10201G with 2 inch hole centers, # CE10206G which is a heavy duty bracket with 2-1/2 inch hole centers, and # CE10200G which is a standard duty bracket with 2-1/2 inch hold centers.
view full answer... - Recommended Boat Brackets In 10 Inch Tall Size To Allow Proper Draining With 8 Inch Rear SetFor you application, I recommend the CE Smith Bolster Bracket - Galvanized Steel - 10" Tall - Qty 1, # CE10101G. This is 10 inches tall and 2-1/2 inches wide. With this product you will most likely want the CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1, # CE15283GA and the CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1, # CE10200G. We also have CE Smith Bolster and Swivel Bracket Assemblies - Galvanized...
view full answer... - Does the CE Smith Swivel Bracket Come with a Bolster BracketThe swivel bracket # CE10200G is just the L-shaped bracket. it can attach to a bolster bracket. To get the bolster bracket with the swivel already on it you can use one of the following: # CE10000G, 9 inches tall # CE10001G, 11 inches tall # CE10002G, 13 inches tall There are also sets of 4: # CE10000G-4 # CE10001G-4 # CE10002G-4 I have also included a link to the bolster brackets we carry with and without swivel brackets attached.
view full answer... - Replacement Boat Trailer Bracket for Bass BoatThe bracket you described is closest to the CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 8-3/4" Tall - Qty 1 # CE10190GA. The CE Smith Bolster Bracket - Aluminum - 8" Tall - Qty 1 # CE10100A40 is similar and also corrosion resistant. These are the shortest options we carry. If you need the top, you can use # CE10200G or # CE10201G.
view full answer... - Replacement Bunk Board Brackets for a Boat TrailerI do have options for you but none of them are specific to your boat trailer. However, bunk boards are fairly universal so I do believe we have options for you. If you are referring to the brackets that attach the posts for the bunk boards to the frame of your trailer then you can use part # CE11451-A as long as your frame does not exceed 3" wide x 4-1/4" tall and the guide posts like part # CE27609PG are 1-1/2" wide. If your frame exceeds 3" wide x 4-1/4" tall but not 3" wide x 5-1/4"...
view full answer... - How To Determine Fit of the CE Smith Bunkboard Guide-On Kit CE27600K75I don't have any specifics on your boat or trailer but the main thing you need to check before using the CE Smith Bunkboard Guide-On Kit part # CE27600K75 is your frame size. This kit works with trailer frames 3" wide and up to 4-1/2" tall. However, it can also accommodate trailer frames 3" wide and up 6" tall if you use the CE Smith Extra-Long U-Bolt Kit part # CE11416. If your trailer frame is not 3" wide or taller than 6" tall then you would need to combine part # CE27609PG (4), part...
view full answer... - Replacement Parts For CE Smith Bunk-Style Guide-Ons Set # CE27660 To Build a Single SideWe do offer the following replacement parts that will allow you to just get a single bunk guide like those found in the CE Smith Bunk-Style Guide-Ons Set # CE27660. Replacement Upright # CE27609PG Qty 1 CE Smith Swivel Bracket # CE10200G Qty 2 Replacement CE Smith Guide-On Mounting U-Bracket # CES94FR Qty 1 CE Smith U-Bolt Kit # CES44FR Qty 1 CE Smith Deluxe Marine-Grade Carpeting # CE11372 You will need to source the lumber for the bunk board and hardware for the swivel bracket locally...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Installed by:
Joe V
Installed by:
Cole B
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
David L
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roger
2/10/2023
No problems.