See what our Experts say about this Buyers Products Accessories and Parts

• Mounting Plates, Anti-Sail Brackets & Reinforcement Plates For Buyers 24" Wide Mud Flaps # 337B30LXP
  We do have Flat Mounting Plates # 337MFBH2375F and 90-Degree Mounting Plates # 337MFBH2375A for the Buyers Mud Flaps # 337B30LXP. We also have the Anti-Sail Brackets in Galvanized # 337405BZ, Chrome # 337B2436ASBC and Stainless Steel # 337405SS. You will also want to use the Bolt Hole Reinforcement Plates # 337MFW2375 to reduce the chances of the flaps being ripped off.
  view full answer...
• Anti-Spray Mud Flap Option For Motorhome
  We do have a possible option for anti-spray mud flaps for your motorhome, which are a universal fit. While they don't look like a brush, these mud flaps do have a line of small nubs on the backside which will propel the backsplash downwards. Each of the mud flaps are 24 inches wide, and are available in a few different lengths so you can get the correct size for your Thor motorhome: - 24" Wide x 24" Tall: Anti-Spray Truck Mud Flaps # 337B24SRP - 24" Wide x 30" Tall: Anti-Spray Truck...
  view full answer...
• Recommended Buyers Truck Mud Flaps for 24 Wide x 40 Tall Application
  Cutting the Truck Mud Flaps 24" Wide x 40" Tall # 337B40LP at that first horizontal band/section will give you a height of about 22" - 24". To save on how much extra material you'll have I recommend going with the Truck Mud Flaps 24" Wide x 30" # 337B30LP instead so you're just clipping off 4" from the bottom. Depending on your setup you may need the 90-Degree Mounting Plates # 337MFBH2375A to finish your installation. Buyers also has the Bolt Hole Reinforcement Plates # 337MFW2375 to...
  view full answer...
• Will Buyers Products 24 Inch Wide Truck Mud Flaps Fit Diesel Dump Truck
  The Truck Mud Flaps - Black Rubber - 24" Wide x 36" Tall # 337B36SPP are a universal fitment so you should be able to get them to fit your Chevy C4500 Duramax Diesel Dump Truck but you need to weld on mounting brackets and then make any modifications necessary for them to work. For mounting brackets we have the Flat Mounting Plates # 337MFBH2375F or 90-Degree Mounting Plates # 337MFBH2375A and then I do recommend using the Bolt Hole Reinforcement Plates # 337MFW2375 as well.
  view full answer...
• Dimensions of Buyer's Products Mud Flap Mounting Plates
  I went out and measured the mounting plates, part # 337MFBH2375A, for you. At its longest point it measures 23-3/4 inches and the shorter distance is 19-3/4 inches. It's 3 inches tall 1 inch deep from the bend. The first mounting hole is 1-1/2 inches from either end and the holes are all inches from each other, center on center. The metal itself is 0.135 inches thick.
  view full answer...
  
• Do the Buyers Products White Mudflaps # 337RC30PPW Have Grooves
  The Buyers Products Mud Flaps # 337RC30PPW that you referenced do not have the grooves. If you are looking for mud flaps with the grooves then part # 337B30PSRPW has the exact same 24" wide x 30" tall dimensions and does have the grooves. For mounting plates we have the 90 degree # 337MFBH2375A, the straight # 337MFBH2375F, and the bolting plate # 337MFW2375.
  view full answer...

Do you have a question about this Accessories and Part?