California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the 60 amp panel mount circuit breaker with the manual push button trip reset. Now this circuit breaker is ideal for switch and power distribution panels. It is designed to protect auxiliary and accessory circuits on your dump hoist, plows, spreaders, lift gates and even cranes. It does use the manual push-to-trip reset here that will give you a quick break in your connection when you need it, and then just to reset your connection push it right back in.This is a waterproof design. It's all in a black plastic box. It is a panel mount design, has 1/4" mounting holes.
On the very back here you can see it has stainless steel studs with stainless steel nuts for good connection. The trip current on this is 60 amps, maximum volts is 42 volts DC.A few dimensions on this, the overall width is going to be 1 15/16" wide. The overall height, from the very bottom to the top is going to be right a 2 15/16", and then the depth, we're going to include the height of that button there. It's going to be right at 2 1/16" deep.That should do it for the review on the 60 amp panel mount circuit breaker with the manual push button trip reset.
It pops before your equipment does !!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.