California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at the Buyers Products Momentary Push Button Switch. This heavy-duty single throw switch is perfect for use on salt spreaders. It features the push button style switch, and the momentary operation means that the unit stays on while the button is pushed, and disengages when it's not pushed.We're looking at a reliable, durable cast iron housing. It is weather- and dust-resistant with a removable rubber boot that just threads on to the actual switch, which is located right here. The mounting nut and the two screw terminals are all included. Maximum amperage is 35 amps.A few measurements I want to mention for you real quick.
That threaded post right there has a diameter measurement of 5/8". And then you'll notice that on the sides here, we have flat sides. So we have the threaded posts with flat sides, and the flat sides measure 9/16". So from flat side to flat side is 9/16". Threaded side to threaded side is 5/8".From the bottom of the switch, so what I did was I measured from basically that first thread to the very back of the unit measures around 2".
So from that first thread to the back of the screw terminal's about 2" long. And then that threaded post has a length measurement of about 11/16".That's going to do it for today's look at the Buyers Products Momentary Push Button Switch.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.