Control Box for Tandem Bulldog Velocity Series Electric Landing Gear Jacks

Video Transcript for Review of Bulldog Trailer Jack - Camper Jack - BD500379

Michael: Hi there. I'm Michael with etrailer.com. Today we're taking a look at the Bulldog control box for Tandem electric landing gear jacks.This is obviously one box with two toggle switches. This is going to allow you to control your two jacks, either individually or together. Now, in theory, being able to control both jacks at the same time is going to keep them level so that they extend out and retract evenly.However, depending on what kind of incline your trailer is on, you might need to raise or lower one individually more than the other. And it's all going to be very easy to do with this control box.

You're not going to have to run from one side of the trailer, to the other, trying to get your jacks leveled out and you can easily control it.You can mount this pretty much anywhere on your trailer. We do have a 10 foot cord, so you could easily mount it at the front of your trailer, allow you to see the side to side pitch of your trailer.It does not come with the mounting hardware, however, it does have these mounting posts here for you that you can easily put a self-tapping screw through and get it mounted onto your trailer.It is going to connect to your jacks with the three pin connector, as you can see here. And they do include some extra wire loom to help you dress up your installation, make it look nice. This does come with a five-year limited warranty from Bulldog, and it's going to work with your two Bulldog velocity series electric landing gear jacks.That's going to complete our look at the Bulldog control box for Tandem electric landing gear jacks..