Product Experts Available Now!
Call 800-298-8924
Accessories and Parts
/
Bulldog
/
Trailer Jack
/
Camper Jack
/
Mounting Brackets
/
Pipe Mount
Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
(4 reviews)
Price: $16.10
In Stock
Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
Item # BD500339
Retail:$24.91
Our Price: $16.10
You Save: 35%Orders above $50 qualify for Free Shipping
Arrives before Christmas with Ground or 3 Day Shipping.
In Stock, Ships Today
- All Info
- Reviews (4)
- Q & A (10)
- Videos (1)
- Photos
- Why etrailer?
Bulldog Accessories and Parts - BD500339
- Trailer Jack
- Camper Jack
- Mounting Brackets
- Bulldog
- Pipe Mount
Weld the U-bracket portion of this pipe mount to your swivel jack so that the jack can be attached to the female pipe on your trailer. Pin hole is 5/8".
Features:
- Tube provides attachment point for your pipe-mount swivel jack
- Male pipe pairs with pipe on jack so you can swing jack down for use and up for travel
- Raw finish is ideal for welding
- U-bracket portion welds onto your jack
- Pin hole diameter: 5/8"
500339 Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
California residents: click here
Video of Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Trailer Jack BD500339 Review
Today we're going to review the Bulldog weld on replacement pipe mount for swivel jack. Now, this tube will provide the attachment point for your pipe mount swivel jack. It has a raw finish, which is ideal for welding. The U-bracket portion of this will weld onto your jack and then the male pipe on the jack right here will attach to the female pipe that's on your trailer and allow you to swing the jack down for use and up for travel. The pin hole diameter is 5 eighth inch diameter and the inside diameter of the pipe mount is going to be right at 2 inches and the outside diameter is right at 2 and a half inches. That will do it on the review of the Bulldog weld on replacement pipe mount for the swivel jack..
Customer Reviews
Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin - BD500339
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Weld the U-bracket portion of this pipe mount to your swivel jack so that the jack can be attached to the female pipe on your trailer. Pin hole is 5/8".
- BD500339
by: Brad11/22/2018
Your service for product on hand is outstanding, meaning that when looking for a part, you guys have it in stock. The shipping department is outstanding. I had placed my order, and I had confirmation within one hour that it was on its way to my house. That's great service, my next order of any kind of trailer parts will be no where else other than etrailer.com. My welding project for these parts is not done yet, do to the Thanksgiving holiday. When done I will forward my pictures to you. 584596
- BD500339
by: Chris11/04/2018
exactly what i needed 579992
- BD500339
by: Lucas04/13/2018
Worked perfectly for my application. 496042
- BD500339
by: JImmy Neese02/02/2015
Great getting you the right parts 172055
4
4
Ask the Experts about this Bulldog Accessories and Parts
Do you have a question about this Accessories and Part?
- Pipe Mounts for 5K Bulldog Square Trailer Jack
- What you are describing is called a pipe mount for a swivel jack. We have some such as # BD500339. The inner tube diameter is 2 inches and it uses a 5/8 inch pin, # BD500231. If you need the other end that mounts to the trailer it is # BD015279.
view full answer... - What is the Width of the Square Mount of the Bulldog Replacement Pipe Mount # BD500339
- On the Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin, # BD500339, the square mount measures 2-1/4 inches wide.
view full answer... - Can Pipe Mount be Welded on Without Damaging Jack?
- Pipe mounts such as the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 or Bulldog Replacement Pipe Mount for Swivel Jack # BD500339 are meant to be welded on to a swivel jack so there should not be any issues with damage to internal parts of your jack.
view full answer... - Pipe Mount for Square Bulldog Jack Compatible with Dimensions
- The Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin, # BD500339 is for square jack mounting. The mount measures 2-1/4 inches wide which is the tubing width of the Bulldog Square Jack # BD195352 and # BD195368 you referenced. The weld on male mount compatible with this is the Weld-On Male Mount Kit for Bulldog Round Jack # BD500240 you also referenced which has a 2 inch outer diameter. I've attached photos to assist further.
view full answer... - Tube Diameter of Bulldog Replacement Swivel Jack Pipe Mount # BD500399
- The inside diameter of the Bulldog Replacement Swivel Jack Pipe Mount is 2 inches, the outer diameter is 2-1/2. This mount is designed to mount onto a trailer, and accept the female pipe mount on a swivel jack.
view full answer... - Width of Bulldog Replacement Pipe Mount for Swivel Jack Where it Attaches to Trailer
- On the Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin, # BD500339, the square mount measures 2-1/4 inches wide.
view full answer... - Recommended Versatile 1,500 Pound Foot Plate or Wheeled Trailer Jack
- Sounds like you are looking for a Bulldog Round Jack # BD170205. This jack has no mount or foot plate for the ultimate versatility. This jack has a lift capacity of 5,000lbs and a lift of 15 inches.
You can buy the weld on mount # BD500339 and a foot plate # BD018098 or wheel # BDCP555 to transform your standard jack to a rolling with the ease of just a snapper pin. I have linked a video for you to see just how easy it is. It's important to know that you will be limited by your lowest...
view full answer... - Will Bulldog Replacement Pipe Mount for Swivel Jack Work with My Trailer Jack
- The Bulldog Replacement Pipe Mount for Swivel Jack - Weld On # BD500339 referenced in your question will provide an attachment point for a pipe-mount swivel jack. The male pipe pairs with the pipe on your jack.
The inside diameter of the Pipe Mount is 2 inches and the outside diameter is 2-1/2 inches. You will just need to take these measurements on your jack to ensure this will work.
I have attached an image with these dimensions labeled for you to look at.
view full answer... - Available Bolt-On Trailer Jacks
- The replacement jack pipe mounts we offer like Bulldog # BD500240 and # BD500339 are only offered in weld-on versions. We do have many bolt-on jacks that you can see on the linked page. These include items such as the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # FXPD15L.
view full answer... - What are the Measurements of the Bulldog Replacement Mount Swivel
- On # BD500339 outside diameter of the pipe measures 2-1/2 inches. The inside diameter of the pipe measures 2 inches.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Satisfaction Guarantee
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Alexander C
Written by:
Sarah W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.