1. Accessories and Parts
  2. Bulldog
  3. Trailer Jack
  4. Camper Jack
  5. Handles and Cranks
  6. Sidewind
Replacement Black, Teardrop-Style Knob Kit for 1,000-lb to 5,000-lb Bulldog Sidewind Jacks

Replacement Black, Teardrop-Style Knob Kit for 1,000-lb to 5,000-lb Bulldog Sidewind Jacks

Item # BD500248
lowest price pledge
Retail:$12.95
Our Price: $8.24
You Save: 36%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.12 lbs
Quantity: 
In Stock, Ships Today
Bulldog Trailer Jack,Camper Jack - BD500248
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Black, teardrop-style knob is designed for use with Bulldog sidewind jack cranks. Call 800-298-8924 to order Bulldog accessories and parts part number BD500248 or order online at etrailer.com. Free expert support on all Bulldog products. Guaranteed Lowest Price and Fastest Shipping for Replacement Black, Teardrop-Style Knob Kit for 1,000-lb to 5,000-lb Bulldog Sidewind Jacks. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (21)
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

Bulldog Accessories and Parts - BD500248

  • Trailer Jack
  • Camper Jack
  • Handles and Cranks
  • Bulldog
  • Sidewind

Black, teardrop-style knob is designed for use with Bulldog sidewind jack cranks.


Features:

  • Black knob is teardrop style
  • Kit works with Bulldog sidewind jacks with capacities ranging from 1,000 lbs to 5,000 lbs
    • Designed for use with Bulldog series 139, 159, 170 and 190 sidewind jacks, as well as Crown sidewind jacks
  • Inner diameter of knob, pal nut, and washer:.5"


500248 Bulldog Black Knob for Sidewind Jacks





Video of Replacement Black, Teardrop-Style Knob Kit for 1,000-lb to 5,000-lb Bulldog Sidewind Jacks

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rebuilding Bulldog Sidewind Jacks

Today we're gonna be taking a look at the rebuild process for the Bulldog 2000 pound capacity round trailer jacks. What we're looking for is the side wind style. These are gonna be the 150 series jacks, and pretty simple process for re-building the jack. Depending on your needs, you'll need 3 different parts. We've got our replacement cap here. This is part number BD015500.

You may or may not need this if yours is undamaged, but it is important to keep dirt and debris from getting in the top of your jack. We've got our replacement handle and gear kit. This is gonna have just about everything that we're gonna need to rebuild the jack. You can see we've got our bevel gears here, we've got the flanged bushings that fit on the outside tube of the jack, we've got the pressure bushing there, the pins, and some washers. Also got our handle. This is gonna take care of the complete upper end of the jack.

Now once we get below this bottom gear, there's a bushing that is inside of the jack that's our friction reducer. It's a good idea once you get to that point, go ahead and switch out the bearing. The gear kit with the handle, everything over here, is gonna be BD500256. Then the bushing in addition BD500251. Let's get these moved over to the side.

We'll start taking this jack apart. For the flat blade screwdriver, we'll just want to remove the cap if it still is on your jack. Inside here you'll see it's pretty greasy. We're gonna go ahead and wipe out all of that that we can. Now we'll turn our jack to where you'll see that little half moon cut out that's in our gear. Our pin's gonna be right in behind there. We take a five 32nd punch.

We're gonna get that driven on through. Once we get it most of the way through, we're gonna have to angle our handle a little bit to get enough room to come completely out. We'll lift up on our handle once that's through. Easy to slide out. You can see that's gonna be a direct replacement of it. We've got five and three-quarters of an inch in total handle length here. That gives us good leverage. See once your handle comes out, your gear is just gonna drop down. Again, these gears are universal, so the bottom gear fits the side, the side gear fits the bottom. We don't want to forget the pin for our handle. You can see the pin that goes in the handle. That's gonna have the little grooves in it, whereas the pin for our base gear is going to be solid. It's not going to have any grooving in it. The base gear's just gonna slide off, and there's also a floating pin which goes through that middle section, which is this screw, so we can take that out. Right below it's that thicker black washer. This is gonna act as a support washer for our gear inside. Then we can just tap out the square portion there. That's that flanged bushing. It's gonna fit right over there in the square hole. That just gives our handle a much wider area to ride on so it's not riding on just the thin tube of the jack there. All right, now it's time to pull on the base, or we can just lift up on the outer tube, and inside we've got our bearing and our other support washer you see there. That's gonna fit right down on top of the screw, and our bearing fits on there. It's gonna offer us a very, very low-friction operation. You'll see the screw just threads down into that baseplate, so as we turn it, this expands, running the jack down. We go the other way, it's gonna bring our jack back up. This screw is very, very hard to damage, so if your jack isn't operating properly, it probably has to do with this bushing creating friction, or the gears not meshing together anymore. This is gonna be exactly how you'd go through the process of re-building it. We'll have our new bearing in place and the support washer that comes with it. Now we can bring our jack outer tube down on the inner tube here. Want to align that elongated dimple with the groove. Bring that all the way down, and then our screw's gonna come right back through this hole that's in the top of it. At this point, we're gonna put our washer back in place. This is that larger black support washer. We've got our base pin. It's gonna slide through. Now we want that to be about equal on both sides. You can see it's about equal and how much is hanging out on each side of our screw, and in your case you're gonna grab your new pieces as you put this back together. This is a brand new jack. We're just taking it apart so we can get a good look at it, so we're gonna reuse our old stuff. Get my gear, and we want to be sure that our pin sits in the enclosed slot, not the open slot. All right, and that should sit down so that the top of the gear is almost dead flush with the top of the screw. flanged bushing will go back in. Might offer a little resistance, but nothing too crazy. Then we'll take our other gear, and again, these are universal. It doesn't matter which one you use for which slot. Gonna place that in so that the gears line up. They're gonna mesh together. Then our handle's gonna come up through the bushing. It's gonna come through the gear, and right out the other side there. You'll see the hole in the handle. We want to rotate our gears so that that half moon opening lines up with the hole. Place the pin that has the little grooves in it right in between that bushing and the gear in that opening. Slide it in, and then we need to cap it in far enough so it's not gonna offer any interference. It should be just inset to the gear. Right back together. Now we want to use a good quality grease. It doesn't have to be a high-temp grease or anything like that, and we're gonna go in there and make sure we get this fully lubricated. You see, right back to brand new there. We'll have a great, smooth operation that's gonna make our trailer very easy to lift and lower with all of our new components in there and fresh grease. Now the replacement cap. You'll see it's got a little bit of a notch right there in the grooves. I like to line that up with the notch that's in the tube of the jack itself. That's just gonna tap on pretty quick and easy. That's gonna complete our rebuild of the Bulldog 150 series jacks. As you can see, with a few parts, and a few tools, you can really save yourself a lot of money as opposed to buying a brand new jack.


Customer Reviews

Replacement Black, Teardrop-Style Knob Kit for 1,000-lb to 5,000-lb Bulldog Sidewind Jacks - BD500248

Average Customer Rating:  4.9 out of 5 stars   (21 Customer Reviews)

Black, teardrop-style knob is designed for use with Bulldog sidewind jack cranks.

- BD500248
by:

Received in short time, installed and happy with results. 498484



- BD500248
by:

Everything's good.Thanks for asking. 471765



- BD500248
by:

Couldn't find the handle locally so went to etrailer. Of course, they had it. Happy with the order and have already ordered from them again. 449437



- BD500248
by:

Exactly what I needed. Fit and works like new. 421554



- BD500248
by:

Quick shipping. 350251



- BD500248
by:

Needed a few things for my boat trailer. E-Trailer had them and for a reasonable price. Will look here first the next time I need triler parts. 322439



- BD500248
by:

This product was just as advertised! Very durable. 276077



- BD500248
by:

Great replacement! 261612



- BD500248
by:

Great replacement knob and is working better than the original. 248492



- BD500248
by:

I'm restoring a AT Horizon off-road trailer and etrailer has most of of the parts needed. On-line ordering is easy and the items arrived promptly. Bulldog Jacks and parts are excellent quality. 243272



- BD500248
by:

exactly what i needed and ordered 237449



- BD500248
by:

Delivered in good time, fit just as it was described. Exactly what I wanted; just the knob kit, not a complete handle like others had for sale. 232562



- BD500248
by:

Very helpful in zeroing in the part I n eeded. 213551



- BD500248
by:

worked fine, fast delivery. 208025



- BD500248
by:

Product worked perfect. Fast shipping!!!!! Thanks for having such a helpful website. 199374



- BD500248
by:

These people were very helpful and took the time to research the product to make sure I rec'd exactly what I needed. 151861



- BD500248
by:

Easy to install. Works as it should. 136219



- BD500248
by:

Working replacement - no issues 136194



- BD500248
by:

Good quality and great delivery response, we had our parts in 3 days from date of order. 116329



- BD500248
by:

cheap enough on price but will not work on every crank handle 99712



- BD500248
by:

Easy install; just what I needed. 63961


21
21

Ask the Experts about this Bulldog Accessories and Parts

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Video Edited:
Jacob T
Video by:
Kathleen M
Updated by:
Laura H
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924